Cooling Part
Super Manifold for A90/91 Supra and BMW B58
Sale · 0% off You save $-9,669Ends 17 December
Shipped Australia wide, or fitted in our Sydenham workshop
Ask the workshop on (02) 9557 3739
Overview
CSF Cooling Part for the Super Manifold for A90/91 Supra and BMW B58.
About CSF intercoolers
A CSF intercooler cools the charge air after the turbo, and cooler charge air means denser air and less heat soaked into the inlet. CSF build theirs in aluminium with a bar and plate or tube and fin core depending on the application, sized to the car rather than oversized for the look of it.
They fit in the factory location and use the original mounting points, so nothing has to be cut.
With the larger and more efficient intercooler performance, lower pressure drop, included fuel rail & kit for top feed port injection, and other industry-leading features, the CSF Super Manifold allows B58 owners to maximise performance.
BMW 3 Series (G20) Sedan M340i xDrive 2019-currentBMW 3 Series (G21) Wagon M340i xDrive 2019-currentBMW 4 Series (G22) Coupe M440i xDrive 2020-currentBMW 4 Series (G23) Convertible M440i xDrive 2020-currentBMW 4 Series (G26) Sportback M440i xDrive 2021-currentBMW 5 Series (G30) Sedan 540i xDrive 2017-2023BMW 5 Series (G31) Wagon 540i xDrive 2017-2023BMW 7 Series (G11) Sedan 740i 2015-2022BMW 7 Series (G12) Sedan 740Li 2015-2022BMW X3 (G01) SUV M40i 2018-currentBMW X4 (G02) SUV M40i 2018-currentBMW X5 (G05) SUV xDrive40i 2018-currentBMW X6 (G06) SUV xDrive40i 2019-currentBMW X7 (G07) SUV xDrive40i 2019-currentBMW Z4 (G29) Roadster M40i 2019-currentToyota Supra (A90) Coupe GTS 2019-2025
Specification
- Utilizes a High Performance, Motorsports-Grade Bar/Plate Air-to-Water Intercooler Core
- Double the Capacity of the OEM Core (12 Rows of Water Cooling vs. OEM 6 Rows)
- Significantly Lower Pressure Drop Across the Core Compared to OEM
- Designed in SolidWorks Using Computational Fluid Dynamics (CFD)
- Integrated Air Divider in Inlet Tank Evenly Distributes Airflow Throughout the Core
- Easy Access to Spin-Off Oil Filter for Quick Oil Changes - No Need to Uninstall Manifold Every Oil Change
- Counter Balanced Design for optimised Airflow
- Integrated Sensor Pad with Three 1/8" NPT Ports to Measure Additional Parameters
- Included Optional Fuel Rail for Top Feed Port Injection
- Individual Port Injection Bungs on Each Cylinder Runner (Comes Pre-Plugged)
- Individual 1/8" NPT Ports on the Top of Each Cylinder Runner for Nitrous or Meth Injection
- Allows for Even Spray Distribution and Control for Maximum Performance and Engine Protection
- Individual 1/8" NPT Breather Ports for Both Inlet/Outlet Water Connections on Back of Manifold for Easy Air-Bleeding of the System
- Plug-and-Play design, Requiring No Modifications to Install
- Includes Hardware and Installation Kit with Picture Diagrams Containing 28 Different Parts for Easy Installation
- Can be Used With OEM or Aftermarket Engine Covers (with OEM Connections)
- Comes Finished in Raw Billet Aluminium (available in custom finishes) - Made by World-Leading Automotive Machinist Custom Plenum Creations in Australia
- CSF pressure tests each #8200 / #8200C manifold at 60-70 PSI for a period of 2-3 minutes during the Quality Control and Inspection process.
- The CSF manifold is not designed to operate above 60 PSI. Users who chose to operate their vehicle with the CSF manifold over 60 PSI does so at their own risk. Operation at these pressure levels will void the CSF Limited Lifetime Warranty.
- Offered in 3 versions, listed as options on this page
- Part number 8200
Fitment
- BMW 3, 2019 to current
- BMW 4, 2020 to current
- BMW 5, 2017 to 2023
- BMW 7, 2015 to 2022
- BMW X3, 2018 to current
- BMW X4, 2018 to current
- BMW X5, 2018 to current
- BMW X6, 2019 to current
- BMW X7, 2019 to current
- BMW Z4, 2019 to current
- Toyota Supra, 2019 to 2025
What you receive
One cooling part, as described above.
Please confirm fitment with us before ordering.
Shipped Australia wide, with fitting available in our workshop. CSF warranty applies.
Not sure this is the right part?
Tell us your car and what you’re after, and we’ll tell you if something else suits better, even if it’s cheaper.
Or call (02) 9557 3739
We reply Monday to Friday, 9:00am to 5:30pm.
Questions we get asked
Will this fit my car?
Check the Fitment list on the product, or use Shop by vehicle at the top of the page. If you’re not sure, send us your vehicle details or rego with the form above and we’ll confirm before you order.
Can you fit it for me?
Yes. We fit what we sell in our Sydenham workshop. Tick “Have us fit it” when you order, or ask us for a fitting date.
Is it a special order?
Some brands are stocked locally and others are ordered in from overseas. If it’s a special order, we confirm the lead time when you order, and special orders are paid in full before we place them.
Will it affect my warranty?
The manufacturer’s warranty covers the part, and we manage any claim. If it’s fitted elsewhere, we’ll need proof it was fitted by a qualified workshop.
Can I return it?
Change-of-mind returns are only available on selected locally stocked brands, such as H&R and Bilstein: unopened and unfitted, within 30 days of delivery, with a 20% restocking fee and you covering return freight. Imported and special order parts can’t be returned for change of mind.

