Bilstein
4WD wheel alignments, set for how you drive
A lifted or loaded 4WD does not sit at factory geometry, so a factory alignment is the wrong answer. We check the steering and suspension first, then set camber, caster and toe for the height the vehicle actually runs at and the load it actually carries.
- Set for lifted and loaded vehicles
- Printout before and after
- Fitted and aligned at Sydenham
Shop by vehicle
Select your vehicle to see the suspension parts we fit and align for it.
Bilstein
Bilstein
Bilstein B60 Front and Rear Suspension Kit for RAM 2500 2014 on (0-2in)
$4,200.00 Have us fit it at Sydenham →
Bilstein
Bilstein B6 Kit Front and Rear Suspension Kit for Toyota HiLux N90 2026 on (0-2in)
$2,200.00 Have us fit it at Sydenham →
Bilstein
Bilstein B60 Front and Rear Suspension Kit for Volkswagen Amarok NF 2023 on (0-2in)
$4,000.00 Have us fit it at Sydenham →
What we set
Alignment is three angles and a steering wheel. On a 4WD the numbers depend on lift, tyre size and load, which is why we ask about all three before we start.
- Inspection
- Steering and suspension checked for play and wear before anything is adjusted
- Camber
- Set for the lift and the tyre, so the inside and outside edges wear evenly
- Caster
- Brought back after a lift so the steering self centres and tracks straight
- Toe
- Set with the vehicle at its usual weight, not empty on the hoist
- Steering wheel
- Centred, every time
- Road test
- Driven and re-checked, with a printout of before and after
From booking to tracking straight in four steps.
One conversation with one person. You see the cost before you commit to anything.
-
1
Tell us the vehicle and the setup
Make, model, year, lift height, tyre size, and what it carries. Any pull, wander or odd tyre wear is worth mentioning.
-
2
Booked in
Alignment pricing is fixed. If the inspection finds worn parts, we quote those before touching them.
Inspection before adjustment -
3
Aligned at Sydenham
Camber, caster and toe set for the height and load, steering wheel centred.
-
4
Road test and printout
Driven, re-checked, and you get the before and after figures to keep.
Printout with every alignment
Who needs one
If the vehicle pulls, wanders or is chewing a tyre edge, the geometry has moved.



In the workshop
Recent 4WDs through the alignment bay.





4WD wheel alignment services in Sydney at Heasmans
Steering and suspension is what Heasmans does. Our technicians use current alignment equipment to set your 4WD's geometry for performance, safety and tyre life.
We take a thorough approach to 4WD wheel alignments. It starts with an inspection of the steering and suspension so that worn parts are found before they affect the alignment. Then camber, caster and toe are adjusted on the alignment hoist for the way the vehicle is set up and used, which gives a smoother ride, even tyre wear and better fuel economy.
After the adjustment the vehicle is road tested to confirm the result, and fine tuned if needed. Whether you are driving the tracks outside Sydney or the city streets, the alignment is set for your vehicle and how you drive it.
Common questions
Why trust Heasmans for your 4WD wheel alignment?
Steering and suspension is what we do, technicians who see lifted and loaded 4WDs every day, and an inspection before anything is adjusted. You get the before and after figures with every alignment.
How often should a 4WD be aligned?
After any suspension change, after new tyres, and whenever it starts to pull or wear a tyre edge. On a vehicle that sees corrugations or a lot of towing, once a year is a sensible check.
Can you align a lifted 4WD to factory spec?
We can, but it is usually the wrong target. A lift changes caster and camber, and the factory numbers assume factory height. We set the angles for the height and tyre the vehicle actually runs.
Should the vehicle be loaded for the alignment?
If it normally carries a canopy or drawers, yes, bring it as you drive it. Toe in particular changes with rear load, and setting it empty gives you the wrong number on the road.
What if you find worn parts?
We stop and quote them before adjusting anything. Aligning around a worn tie rod end or ball joint wastes your money because it will not hold.
Book the alignment.
Vehicle, lift, tyre size and anything it is doing wrong. We reply with a time and the price.
- Phone
- (02) 9557 3739
- orders@heasmans.com.au
- Workshop
- 463 Princes Highway, Sydenham NSW 2044
- Hours
- Monday to Friday, 9:00am to 5:30pm




