Workshop service · 4WD

GVM upgrades, fitted in Sydney

A suspension kit engineered for the load your 4WD actually carries, with the paperwork to match. We quote the kit, the fitting and the compliance for your vehicle before anything is booked.

  • Quoted in writing before booking
  • Fitted and aligned at Sydenham
  • Installation warranty 3 months / 2,000 km

Shop by vehicle

Select your make and model to see the parts we fit for this job.

Not sure what fits? Send us your rego →
Make
Model
Year
Chassis
Variant
Parts we fit for a GVM upgrade. Pick your vehicle, then Search to see everything we sell for it.  Shop all 4WD suspension →

What goes on the vehicle

Every GVM kit is a set of parts chosen for one vehicle and one load. This is what goes on, and what we check while it is on the hoist.

Springs
Coil or leaf, rated for the new gross mass
Dampers
Valved to suit the heavier spring
Load assist
Polyair airbags where the kit calls for them
Ancillaries
Bump stops, shackles, U bolts, brake line extensions as required
Alignment
Four wheel alignment to the new ride height
Compliance
Certification requirements for your vehicle explained on the quote
Road test
Driven and checked before handover

From quote to compliance in four steps.

One conversation with one person. You see the cost before you commit to anything.

  1. 1

    Tell us what you carry

    Make, model, year, and what goes in the tray, on the roof or behind the towbar. A photo of the setup helps.

  2. 2

    Written quote

    Kit, fitting and compliance costed for your vehicle. Nothing is ordered until you say yes.

    Special order kits paid up front
  3. 3

    Fit, align, road test

    Fitted at Sydenham, torqued to spec, four wheel alignment to the new height, then driven.

  4. 4

    Compliance

    We walk you through the certification your vehicle needs and you leave with the paperwork that comes with the kit.

    You leave with the paperwork
Not sure where your vehicle sits? Send us the gear list and we tell you before you spend anything.

Who needs one

If the vehicle sits over its plated GVM once loaded, the answer is you.

Work ute with a canopyCanopy, drawers, a second battery and tools add up fast on a dual cab.
4WD
Towing a van or boatBall weight counts toward GVM. A 3 tonne van can add 300 kg before anyone gets in.
4WD
Touring setupBar, winch, long range tank, fridge, water and a roof top tent. Most sit over GVM once packed.
4WD

GVM upgrades in Sydney with Heasmans

A GVM upgrade lets your 4WD carry more, legally, with the suspension to do it properly. Heasmans fits steering and suspension in our own Sydney workshop.

A GVM upgrade raises the maximum your vehicle is legally allowed to weigh fully loaded, with a suspension kit engineered and approved for the extra weight, so a 4WD that carries heavy loads for work, touring or towing stays safe, compliant and comfortable.

The benefits of upgrading your GVM

A properly upgraded GVM prevents overloading, which otherwise leads to tyre failure, poor handling and accelerated wear. It gives better control under load, keeps you compliant with Australian weight regulations and avoids fines, and a professionally upgraded and documented vehicle holds its value better with buyers who tow or tour.

Our GVM upgrade process

It starts with a conversation about your vehicle and what you carry, followed by an inspection and a recommendation on the right kit. The kit is fitted and aligned here at Sydenham, we explain the certification your vehicle needs and the paperwork that comes with the kit, and we are here afterwards if anything needs adjusting.

Common questions

What is a GVM upgrade?

Gross Vehicle Mass is the maximum your vehicle is legally allowed to weigh fully loaded, including passengers, fuel, accessories and whatever is in the tray or on the towball. A GVM upgrade raises that limit with a suspension kit engineered and approved for the extra weight, so an SUV or 4WD that is tasked with heavy loads for work, touring or towing stays safe, compliant and comfortable.

Do I actually need a GVM upgrade?

If the vehicle sits over its plated GVM once loaded, yes. Send us your gear list and we can tell you where you stand before you spend anything.

Can I just fit heavier springs?

You can, and it will carry the load better, but the legal limit on the plate does not change. A GVM upgrade is the kit plus the paperwork.

Does it raise my towing capacity?

No. GVM is the vehicle's own loaded weight. Towing capacity and GCM are set separately and most kits do not change them.

Will it change the ride?

Load rated springs are firmer unladen. We tell you how much for the kit we recommend, and where load assist airbags are the better answer.

Why choose Heasmans for your GVM upgrade?

We specialise in GVM upgrades for Sydney 4WDs. Our technicians use the latest alignment equipment and quality parts from Bilstein, H&R and Polyair to raise your vehicle's carrying capacity safely. Upgrades are built to comply with the Australian Design Rules so your vehicle meets the legal safety standards, and every job is tailored to how you actually use the vehicle.

Tell us about the vehicle.

We reply with a written quote for the kit, the fitting and the compliance. No booking until you have seen it.

Phone
(02) 9557 3739
Email
orders@heasmans.com.au
Workshop
463 Princes Highway, Sydenham NSW 2044
Hours
Monday to Friday, 9:00am to 5:30pm
Heasmans collects these details to respond to your enquiry. Privacy Policy.