Workshop service · Performance

Track preparation, by people who follow the sport

Heasmans prepares race cars from club weekenders to full competition builds. Fitting, geometry, corner weighting, pre race service and the spanner check, all in house at Sydenham. Bring your parts or let us source them.

  • Spanner check for scrutineering
  • Track alignment and corner weight
  • Parts supplied or customer supplied

Shop by vehicle

Select your car to see the track parts we fit and set up for it.

Not sure what fits? Send us your rego →
Make
Model
Year
Chassis
Variant
A few of the parts we fit and set up for the track. Pick your car, then Search to see everything we sell for it.  Shop all performance parts →

What we do before a meeting

Track prep is a list, and the list depends on the car and the event. These are the jobs that make up most of it.

Track alignment
Camber, caster and toe set for the circuit and the tyre, not road spec
Corner weighting
On the scales with you in the seat, cross weight set
Pre race service
Fluids, brakes, bearings and suspension gone over before the meeting
Spanner check
Everything torqued and marked, the checklist scrutineers work from
Fitting
Coilovers, sway bars, brakes, exhausts and the rest, yours or ours
Setup notes
You leave with the numbers so you can change them at the track and come back to baseline

From quote to the grid in four steps.

One conversation with one person. You see the cost before you commit to anything.

  1. 1

    Tell us the car and the event

    What you drive, where you are racing, when, and what the car did at the last meeting.

  2. 2

    Written quote

    Every job itemised so you can pick what you need this time. Parts, if any, costed with the labour.

    Nothing ordered until you say yes
  3. 3

    Prepared at Sydenham

    Fitting, alignment, scales and service in the one visit, in the right order.

  4. 4

    Spanner check and handover

    Torque marked, checklist signed, setup sheet in the glovebox. Ready for scrutineering.

    Setup sheet with every car
Got a meeting coming up? Tell us the date and we will work backwards from it.

What we prepare

From a road car doing its first day to a car that races every month.

First track dayFluids, pads, a track alignment and a spanner check. Enough to be safe without rebuilding the car.
Performance
Club racingCorner weight, alignment to your notes, pre race service and the scrutineering checklist before every round.
Performance
Competition buildFull setup work, parts sourced and fitted, baseline recorded so changes at the track mean something.
Performance

Vehicle setup and track preparation at Heasmans

Heasmans prepares race cars from club level weekenders to full competition builds, so we know what it takes to get a car sorted for the track.

We handle the fitting, the geometry and the setup work, all done in house by people who actually follow the sport. Bring your parts in or let us source what you need, and we make sure everything goes on correctly and performs the way it should. Whether you are heading to your first track day or chasing a podium, the car will be ready.

Getting the alignment right is one of the most important things you can do before a track day. Small changes to camber, caster and toe have a big effect on how the car feels and how quickly the tyres wear, so we set alignments specifically for track use. Corner weighting puts the load evenly across all four corners so the car feels balanced and predictable instead of something you fight.

Before any race weekend a service is worth doing: fresh fluids, brakes checked, suspension gone over properly. It catches problems before they become expensive ones on track. Most circuits and club events require a spanner check before you go out, so we carry out the inspection scrutineers look for, with everything torqued and nothing loose, and sort anything that needs attention before you leave.

Heasmans supplies and fits a wide range of performance and motorsport parts at our Sydney workshop. We work with most of the major brands and can source parts for track and road cars. If you know what you want, bring it in and we fit it properly. If you are still working it out, we talk through the options so you do not end up with parts that are wrong for your car or how you use it.

Common questions

Why choose Heasmans for your track preparation?

Decades of motorsport experience, current alignment and setup equipment, and a team that races and follows the sport. Every car is treated as its own project, with the setup recorded so you can repeat it.

What is in a spanner check?

Wheel nuts, suspension and steering fasteners, brake lines and pads, fluid levels, seat and harness mounts, battery tie down and anything else on the event's scrutineering list, all torqued and marked. If something fails we tell you before you leave.

Can you fit parts I bought elsewhere?

Yes. Bring them in and we fit them properly, with our workmanship warranty on the fitting. We will also tell you if a part is wrong for the car before it goes on.

How far ahead should I book?

A week before the meeting is comfortable for a service and spanner check. If parts need to be ordered or a full setup is involved, give us more and tell us the event date when you get in touch.

Do you do road cars as well?

Yes. Most of the cars we prepare are road registered and driven to the circuit. A track alignment on a road car is a compromise we talk through with you.

Tell us about the car and the meeting.

Car, the event and date, and what you need done. We reply with an itemised quote.

Phone
(02) 9557 3739
Email
orders@heasmans.com.au
Workshop
463 Princes Highway, Sydenham NSW 2044
Hours
Monday to Friday, 9:00am to 5:30pm
Heasmans collects these details to respond to your enquiry. Privacy Policy.