Workshop service · Performance

Corner weight adjustment, done on the scales

Four scales, your weight in the seat, half a tank of fuel. We adjust ride height at each corner until the cross weight is where it should be, so the car turns the same way left and right and puts its power down out of the corner.

  • Set with the driver in the seat
  • Printout of all four corners
  • Coilovers or height adjustable springs

Shop by vehicle

Select your car to see the adjustable suspension we fit and set up for it.

Not sure what fits? Send us your rego →
Make
Model
Year
Chassis
Variant
Adjustable suspension we fit and corner weight most often. Pick your car, then Search to see everything we sell for it.  Shop all performance suspension →

What happens on the scales

Corner weighting is not a quick lift and look. It is a sequence, and the order matters. This is how we run it.

Scales
Four pad scales levelled to each other before the car goes on
Ballast
Driver weight in the seat and the fuel load you race with
Cross weight
Front left plus rear right as a percentage of total, the number that decides balance
Ride height
Adjusted corner by corner on the coilover or spring perch until the split is right
Sway bars
Disconnected during the set, reconnected without preload
Alignment
Checked after, because height changes move camber and toe

From quote to a balanced car in four steps.

One conversation with one person. You see the cost before you commit to anything.

  1. 1

    Tell us the car and where it runs

    Model, suspension fitted, the circuits you drive and what the car is doing that you do not like.

  2. 2

    Written quote

    Corner weight is a fixed price on a car with adjustable suspension. If an alignment is needed after, it is on the quote too.

    Fixed price on adjustable suspension
  3. 3

    On the scales at Sydenham

    Levelled, ballasted to you, cross weight set by adjusting ride height at each corner.

  4. 4

    Alignment check and printout

    Camber and toe re-checked after the height changes. You leave with the figures for all four corners.

    Printout with every set
Car on standard springs? Corner weighting needs adjustable ride height. We can quote a coilover or height adjustable spring kit and set it up in the same visit.

Who needs one

Anything with adjustable suspension that is driven hard. Road or track.

Track day regularThe car turns in better one way than the other. Cross weight is almost always why.
Performance
Just fitted coiloversNew coilovers set by eye are never equal corner to corner. The scales finish the job.
Performance
Club racingScrutineered minimum weight, driver ballast and a known cross weight before the first session.
Performance

Corner weight adjustment at Heasmans

Corner weighting, also called scaling or balancing, sets how the car's weight is shared across the four tyres. Heasmans sets up race and road cars in our Sydney workshop.

Corner weight adjustment is essential for any vehicle aiming for its best handling and stability. By adjusting ride height at each corner we change how the total weight is shared across the four wheels, so the car responds predictably and consistently to your inputs. That matters for racing, track days and anyone who wants precise handling on the road.

Our technicians measure and adjust weight distribution on levelled scales with the driver's weight in the car. The result is better grip, more even tyre wear and a car that is balanced for whatever it faces on the road or the track.

Common questions

Why are corner weight adjustments crucial for your vehicle?

A car with uneven cross weight behaves differently turning left and right, and puts power down unevenly. Setting the cross weight gives you a car that is predictable both ways, which is faster on track and safer on the road.

Does my car need adjustable suspension?

Yes. Corner weighting works by changing ride height at each corner, which needs coilovers or height adjustable springs. On standard springs there is nothing to adjust.

Should I be in the car?

Yes, or we ballast your weight into the seat. The driver is often 10 percent of a race car's weight and sits off centre, so a set done with the car empty is wrong the moment you get in.

Can it be tailored to my driving style?

Within reason. We can bias the set towards neutral handling or something more aggressive, and we will talk you through what each change does before we make it.

Do I need an alignment afterwards?

Usually a check at least. Changing ride height moves camber and toe, so we re-check after the set and correct anything that has moved.

Tell us about the car.

Car, suspension fitted and where you drive it. We reply with a price and a time.

Phone
(02) 9557 3739
Email
orders@heasmans.com.au
Workshop
463 Princes Highway, Sydenham NSW 2044
Hours
Monday to Friday, 9:00am to 5:30pm
Heasmans collects these details to respond to your enquiry. Privacy Policy.