Girodisc Mercedes 360mm Rear Rotors
Sale · 0% off You save $-2,989Ends 17 December
Shipped Australia wide, or fitted in our Sydenham workshop
Ask the workshop on (02) 9557 3739
Overview
Brake type: fitment depends on your brake package. The manufacturer fitment list below shows the brakes each car needs. Please check your car before ordering, or send us your VIN.The Girodisc system is a direct replacement for the OE disc. No modifications are necessary. The disc will bolt directly to the car and work with OE calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Girodisc rear rotors are approx 8.1 lbs. lighter per rotor then the stock units. 24.7 lbs. vs. 16.6 lbs. This reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.The central hat section of our rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum. The disc is made from our own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, manufactured by Girodisc in the USA to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The pins are secured by class 12.9 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads.Once the Girodisc system is in place, simply replace the cast iron rotor when needed. Sold/priced per pair
Fits
Mercedes-Benz AMG GT (C190) Coupe GT 2015-2021
Mercedes-Benz AMG GT (C190) Coupe GT C 2017-2021
Mercedes-Benz AMG GT (C190) Coupe GT R 2017-2021
Mercedes-Benz AMG GT (C190) Coupe GT S 2015-2021
Mercedes-Benz AMG GT (R190) Roadster GT C Roadster 2017-2021
Mercedes-Benz AMG GT (R190) Roadster GT Roadster 2017-2021
Mercedes-Benz AMG GT (X290) Coupe GT63 4-Door Coupe 2019-current
Mercedes-Benz AMG GT (X290) Coupe GT63 S 4-Door Coupe 2019-2023
Mercedes-Benz C-Class (A205) Convertible AMG C63 Cabriolet 2016-2021
Mercedes-Benz C-Class (A205) Convertible AMG C63 S Cabriolet 2016-2021
Mercedes-Benz C-Class (C205) Coupe AMG C63 Coupe 2015-2021
Mercedes-Benz C-Class (C205) Coupe AMG C63 S Coupe 2015-2021
Mercedes-Benz C-Class (S205) Wagon AMG C63 Estate 2015-2021
Mercedes-Benz C-Class (S205) Wagon AMG C63 S Estate 2015-2021
Mercedes-Benz C-Class (W205) Sedan AMG C63 2015-2021
Mercedes-Benz C-Class (W205) Sedan AMG C63 S 2015-2021
Mercedes-Benz S-Class (W222) Sedan AMG S63 2015-2020
Mercedes-Benz S-Class (W222) Sedan AMG S65 2015-2020
Mercedes-Benz SL (R231) Roadster AMG SL63 2015-2020
Mercedes-Benz SL (R231) Roadster AMG SL65 2015-2020
Manufacturer fitment
Mercedes AMG GT AMG GT63 / GT63 S - Rear
Mercedes AMG GT Base model - Rear
Mercedes AMG GT GT-S/C/R (Without carbon ceramic) - Rear
Mercedes C63 W205 (2015-2020) - Rear
Mercedes C63 S W205 (2015-2020) (With carbon ceramic) - Rear
Mercedes C63 S W205 (2015-2020) (Without carbon ceramic) - Rear
Mercedes S-Class S63/65 (W222, 2014-18) (Without carbon ceramic) - Rear
Mercedes SL-Class SL63 (R231, 2012-17) (Without carbon ceramic) - Rear
Mercedes SL-Class SL65 (R231, 2012-18) (Without carbon ceramic) - Rear
Part number
A2-148
Professional fitting is recommended.
Not sure this is the right part?
Tell us your car and what you’re after, and we’ll tell you if something else suits better, even if it’s cheaper.
Or call (02) 9557 3739
We reply Monday to Friday, 9:00am to 5:30pm.
Questions we get asked
Will this fit my car?
Check the Fitment list on the product, or use Shop by vehicle at the top of the page. If you’re not sure, send us your vehicle details or rego with the form above and we’ll confirm before you order.
Can you fit it for me?
Yes. We fit what we sell in our Sydenham workshop. Tick “Have us fit it” when you order, or ask us for a fitting date.
Is it a special order?
Some brands are stocked locally and others are ordered in from overseas. If it’s a special order, we confirm the lead time when you order, and special orders are paid in full before we place them.
Will it affect my warranty?
The manufacturer’s warranty covers the part, and we manage any claim. If it’s fitted elsewhere, we’ll need proof it was fitted by a qualified workshop.
Can I return it?
Change-of-mind returns are only available on selected locally stocked brands, such as H&R and Bilstein: unopened and unfitted, within 30 days of delivery, with a 20% restocking fee and you covering return freight. Imported and special order parts can’t be returned for change of mind.

