ST Suspensions Part 13210078

ST Coilover X Kit

Audi A4 (B8), Audi A7 (4G)

$1,630.30 RRP $2,329 inc GST

Sale · 30% off You save $698.70Ends 17 December

Shipped Australia wide, or fitted in our Sydenham workshop 

Ask the workshop on (02) 9557 3739 

Overview

ST Coilover X Kit for the Audi A4.

About the ST X coilovers

The ST X is the entry coilover in the range, with height adjustment on a continuous thread and damping set at the factory. ST is part of KW Automotive and the kits are engineered alongside them, which is why a budget coilover still rides properly rather than just sitting low.

Struts are galvanised and multiple sealed against corrosion, with twin-tube dampers and an adjustable spring plate. The lowering range depends on the car and is listed in the specification where ST state it.

Need to get low? ST coilovers feature a continuous thread construction for height adjustment from moderate to eXtreme! Each coilover is manufactured by KW Automotive and their expertise and know how ensures maximum quality and fantastic driving dynamics.

Once installed, the ST X coilover can be easily adjusted using a polyamide ring on the galvanized, multiple-sealed strut. Adjustment is different for each car, but typically you can expect between 35 and 65mm of lowering on both the front and rear axles. For lowered cars as standard (such as the BMW E9x 3-series) the ST X coilover features a range of 30 to 60mm (front axle) and 25-55mm (rear axle).

Designed in conjunction with KW Germany, ST X coilovers deliver a sporty handling by reducing the car’s bodyroll during compression as well as improving agility when driving fast. The high-quality production of each ST X coilover includes a low-friction and pressure resistant housing alongside a chrome-plated piston rod for maximum longevity. A mono block guide and ST seal package ensures the twin-tube dampers remain free of dirt particles in all weather conditions.

Specification

  • Individual lowering within the tested adjustment range
  • Front and rear axle thread adjustment (when possible)
  • Galvanized coilover struts with additional coating for optimized corrosion protection
  • Complete solution with adjustable spring plate, spring system and bumpers with dust protection
  • Powerful twin-tube dampers with high-quality components for maximum longevity
  • Suits engines: 2.0 TDI quattro, 2.0 TFSI quattro, 3.0 TDI quattro, 2.0 TDI, 2.7 TDI, 3.0 TDI, 3.0 TFSI quattro, 3.2 FSI, 3.2 FSI quattro, S4 quattro, 1.8 TFSI, 2.0 TFSI, 2.5 FSI, 2.8 FSI, 2.8 FSI quattro, 3.0 TFSI QUATTRO
  • Listed by ST for: Audi A4 (B8) Wagon 2.0 TFSI quattro 2008-2015; Audi A4 (B8) Wagon 3.0 TDI quattro 2008-2015; Audi A4 (B8) Wagon 2.0 TDI 2008-2015; Audi A7 (4G) Sportback 2.0 TFSI 2015-2018; Audi A7 (4G) Sportback 3.0 TFSI 2015-2018
  • Excluding models with automatic level control, or automatic level system can be adjusted in accordance
  • At vehicles equipped with electronic damping, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510144, Price 299,- EURO incl. VAT
  • Excluding four wheel drive models
  • Not for vehicles with electronic damper control
  • Part number 13210078

Fitment

  • Audi A4, 2008 to 2015
  • Audi A7, 2015 to 2018

What you receive

A complete front and rear kit for one vehicle.

Shipped Australia wide, with fitting available in our workshop. ST Suspensions warranty applies.

Not sure this is the right part?

Tell us your car and what you’re after, and we’ll tell you if something else suits better, even if it’s cheaper.

Or call (02) 9557 3739

We reply Monday to Friday, 9:00am to 5:30pm. 

Questions we get asked

Will this fit my car?

Check the Fitment list on the product, or use Shop by vehicle at the top of the page. If you’re not sure, send us your vehicle details or rego with the form above and we’ll confirm before you order.

Can you fit it for me?

Yes. We fit what we sell in our Sydenham workshop. Tick “Have us fit it” when you order, or ask us for a fitting date.

Is it a special order?

Some brands are stocked locally and others are ordered in from overseas. If it’s a special order, we confirm the lead time when you order, and special orders are paid in full before we place them.

Will it affect my warranty?

The manufacturer’s warranty covers the part, and we manage any claim. If it’s fitted elsewhere, we’ll need proof it was fitted by a qualified workshop.

Can I return it?

Change-of-mind returns are only available on selected locally stocked brands, such as H&R and Bilstein: unopened and unfitted, within 30 days of delivery, with a 20% restocking fee and you covering return freight. Imported and special order parts can’t be returned for change of mind.