Evolution Header Set (Titanium)
Porsche 911 GT3, GT3 Touring (992)
Sale · 0% off You save $-20,159Ends 17 December
Shipped Australia wide, or fitted in our Sydenham workshop
Ask the workshop on (02) 9557 3739
Overview
Akrapovic Evolution Header Set (Titanium) for the Porsche 911 GT3, GT3 Touring (992).
About Akrapovič headers
Akrapovič headers replace the factory manifolds, matched to their own systems and to the engine's firing order so the gas pulses arrive without fighting each other.
Evolution Header Set (Titanium) was tested and developed together with Slip-On Race Line (Titanium) system.
This product is made using high-grade titanium, with the parts sandblasted and coated for durability. This new header set has a routing that has been designed to perfectly direct the gas flow. Showcasing the special manifold crossover pipes in the headers, cast in the Akrapovic in-house titanium foundry, this innovative design comes directly from race-proven exhaust systems, and this is the first time it has featured in an Akrapovic aftermarket car exhaust. This masterpiece of engineering is designed solely to optimize the performance of the Slip-On Race Line (Titanium) in the midrange. Many parts in the headers are cast in the in-house foundry, and the complete use of titanium results in a weight saving of 3.8 kg, which is 28% lighter than the stock equivalent.
Tuned quarter-length resonators in addition to the catalytic converters ensure the sound quality and the absence of any distortion or unwanted frequencies, creating a unique sound experience. The combination of an Akrapovic Slip-On Race Line (Titanium) and Evolution Header Set (Titanium), developed for use on closed-course competition circuits only, provides increases of 16.6 kW (22.6 hp) in power at 4,550 rpm and 35.2 Nm in torque at 4,500 rpm, when tested on the Akrapovic dyno against a Porsche 911 GT3 (992) with a standard stock exhaust.
When installing the Akrapovic Evolution Header Set (Titanium) on vehicles with particulate filters, remapping the ECU is mandatory to prevent potential “check engine light” warning signals. When installing the Akrapovic Evolution Header Set (Titanium) on vehicles without particulate filters, remapping the ECU is recommended.
This system fits also on vehicles equipped with Otto particulate filter (OPF).
This product does not fit on RS version.
Specification
- Power: 376.2 kW at 8,450 rpm standard, 382.3 kW at 8,350 rpm with Akrapovič, up to + 16.6 kW at 4,550 rpm
- Torque: 476.4 Nm at 6,050 rpm standard, 481.6 Nm at 5,850 rpm with Akrapovič, up to + 35.2 Nm at 4,500 rpm
- Weight: 13.5 kg standard, 9.7 kg with Akrapovič, 3.8 kg saved
- Weight saving: 28.0%
- Sound level: 97.2 dB at 3,750 rpm standard, 107.3 dB at 3,750 rpm with Akrapovič
- Installation time: about 120 minutes
- Listed by Akrapovič for: Porsche 911 (992.1) Coupe GT3 2021-2024Porsche 911 (992.1) Coupe GT3 Touring 2022-2024; Porsche - 911 GT3 / GT3 Touring (992) (2021 - 2024)
- Part number E-PO/T/7
Fitment
- Porsche 911, 2021 to 2024
What you receive
One evolution header set (titanium), as described above.
This product does not meet emission compliance requirements for street or highway use.
Shipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.
Not sure this is the right part?
Tell us your car and what you’re after, and we’ll tell you if something else suits better, even if it’s cheaper.
Or call (02) 9557 3739
We reply Monday to Friday, 9:00am to 5:30pm.
Questions we get asked
Will this fit my car?
Check the Fitment list on the product, or use Shop by vehicle at the top of the page. If you’re not sure, send us your vehicle details or rego with the form above and we’ll confirm before you order.
Can you fit it for me?
Yes. We fit what we sell in our Sydenham workshop. Tick “Have us fit it” when you order, or ask us for a fitting date.
Is it a special order?
Some brands are stocked locally and others are ordered in from overseas. If it’s a special order, we confirm the lead time when you order, and special orders are paid in full before we place them.
Will it affect my warranty?
The manufacturer’s warranty covers the part, and we manage any claim. If it’s fitted elsewhere, we’ll need proof it was fitted by a qualified workshop.
Can I return it?
Change-of-mind returns are only available on selected locally stocked brands, such as H&R and Bilstein: unopened and unfitted, within 30 days of delivery, with a 20% restocking fee and you covering return freight. Imported and special order parts can’t be returned for change of mind.

