Akrapovic Part E-BM/T/5

Evolution Link Pipe Set (Titanium)

BMW M2 Competition, M2 CS (F87N)

$5,849 inc GST

Shipped Australia wide, or fitted in our Sydenham workshop 

Ask the workshop on (02) 9557 3739 

Overview

Akrapovic Evolution Link Pipe Set (Titanium) for the BMW F87N M2 Competition - BMW M2 Competition, M2 CS (F87N).

About Akrapovič link pipes

A link pipe replaces the section between the factory catalysts and the rear system. On most applications it is an optional upgrade to a Slip-On Line, developed and tested with it, and it changes both the flow and the sound.

Fitting a link pipe usually means the ECU has to be remapped, and it can void the type approval the Slip-On carries on its own. The product states which applies.

Evolution Link Pipe Set (Titanium) was tested and developed together with Slip-On Line (Titanium).

The system was developed on BMW M2 Competition (F87N) equipped with OPF/GPF, however it fits both versions (OPF and non OPF).

The Evolution link pipe set upgrades the Slip-On system to the Evolution system, which consists of a slip-on rear muffler and larger Evolution link pipe tubes with a middle muffler, all designed to make the performance and workmanship of the complete system as perfect as it looks. It is crafted entirely from titanium. The whole system is designed to provide the smoothest flow. The power and torque gains of the M2 Competition with the combination of the Slip-On Line system and Evolution link pipe set are guaranteed. In-depth engineering has produced a unique sound profile, distinctly different from the stock system, yielding a deep and sporty sound with no unwanted overtones or drone and an almost racing sound, as well as a significant change to the sound with the valves in the open or closed positions.

The control kit to optimize the balance between sportiness and comfort is included, together with the receiver and Sound Remote controller (or smartphone app) to regulate the valves. When installed in combination with BMW M2 CS Slip-On (S-BM/T/26H), the Slip-On´s Control Kit module P-HF1386 must be installed with the Link Pipe Set´s receiver and Key Fob.

When installing the Akrapovic Evolution link pipe set, remapping the ECU is mandatory in order to prevent potential “check engine light” warning signals.

Listed by Akrapovič for

  • BMW - M2 Competition (F87N) (2018 - 2020)
  • BMW - M2 Competition (F87N) - OPF/GPF (2018 - 2020)
  • BMW - M2 CS (F87N) (2020 - 2021)
  • BMW - M2 CS (F87N) - OPF/GPF (2020 - 2021)

Specification

  • Power: 302.4 kW at 5,550 rpm standard, 310.4 kW at 6,850 rpm with Akrapovič, up to + 11.2 kW at 4,800 rpm
  • Torque: 570.7 Nm at 2,850 rpm standard, 582.6 Nm at 2,900 rpm with Akrapovič, up to + 23.8 Nm at 4,650 rpm
  • Weight: 14.6 kg standard, 7.5 kg with Akrapovič, 7.2 kg saved
  • Weight saving: 49.0%
  • Sound level: 83 dB at 3,750 rpm standard, 93 dB at 3,750 rpm with Akrapovič
  • Installation time: about 90 minutes
  • ECU mapping required: Yes: For perfect performance, throttle response and durability, special developed mapping has to be used.
  • Listed by Akrapovič for: BMW M2 (F87) Coupe CS 2020-2021BMW M2 (F87) Coupe Competition 2018-2021
  • Part number E-BM/T/5

Fitment

  • BMW M2, 2018 to 2021

What you receive

One evolution link pipe set (titanium), as described above.

This product does not meet emission compliance requirements for street or highway use.

Shipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.

Not sure this is the right part?

Tell us your car and what you’re after, and we’ll tell you if something else suits better, even if it’s cheaper.

Or call (02) 9557 3739

We reply Monday to Friday, 9:00am to 5:30pm. 

Questions we get asked

Will this fit my car?

Check the Fitment list on the product, or use Shop by vehicle at the top of the page. If you’re not sure, send us your vehicle details or rego with the form above and we’ll confirm before you order.

Can you fit it for me?

Yes. We fit what we sell in our Sydenham workshop. Tick “Have us fit it” when you order, or ask us for a fitting date.

Is it a special order?

Some brands are stocked locally and others are ordered in from overseas. If it’s a special order, we confirm the lead time when you order, and special orders are paid in full before we place them.

Will it affect my warranty?

The manufacturer’s warranty covers the part, and we manage any claim. If it’s fitted elsewhere, we’ll need proof it was fitted by a qualified workshop.

Can I return it?

Change-of-mind returns are only available on selected locally stocked brands, such as H&R and Bilstein: unopened and unfitted, within 30 days of delivery, with a 20% restocking fee and you covering return freight. Imported and special order parts can’t be returned for change of mind.