ST Suspensions Part 182200DJ

ST Coilover XA Kit

BMW 3 (G20, G80)

$2,036.30 RRP $2,909 inc GST

Sale · 30% off You save $872.70Ends 17 December

Shipped Australia wide, or fitted in our Sydenham workshop 

Ask the workshop on (02) 9557 3739 

Overview

ST Coilover XA Kit for the BMW 3.

About the ST XA coilovers

The ST XA adds rebound adjustment to the height adjustable coilover, so the car can be firmed up for a back road or softened for a rough one without touching the ride height.

Construction is the same galvanised, multiple sealed strut as the X, with twin-tube dampers and an adjustable spring plate.

For drivers wanting more than just ride height adjustment comes the ST XA coilover. Developed alongside KW Automotive the ST XA allows individual adjustment of the damping to suit just about all your driving needs!

ST XA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. Any vehicle fitted with ST XA coilovers will act much more agile and sporty compared to standard.

Like all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.

Specification

  • External damper adjustment
  • Latest damping technology for maximum longevity
  • Reduced system friction for effective damping adjustment
  • Individual lowering within the tested adjustment range
  • Front and rear axle (when possible) with thread adjustment
  • Galvanized coilover struts with additional coating for an optimized corrosion protection
  • Complete solution with adjustable spring plate, spring system and bumpers with dust protection
  • Suits engines: 320 d Mild-Hybrid xDrive, 320 d xDrive, 320 i xDrive, 330 i xDrive
  • Listed by ST for: BMW 3 (G20, G80)
  • At vehicles equipped with electronic damping, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68511086
  • Part number 182200DJ

What you receive

A complete front and rear kit for one vehicle.

Shipped Australia wide, with fitting available in our workshop. ST Suspensions warranty applies.

Not sure this is the right part?

Tell us your car and what you’re after, and we’ll tell you if something else suits better, even if it’s cheaper.

Or call (02) 9557 3739

We reply Monday to Friday, 9:00am to 5:30pm. 

Questions we get asked

Will this fit my car?

Check the Fitment list on the product, or use Shop by vehicle at the top of the page. If you’re not sure, send us your vehicle details or rego with the form above and we’ll confirm before you order.

Can you fit it for me?

Yes. We fit what we sell in our Sydenham workshop. Tick “Have us fit it” when you order, or ask us for a fitting date.

Is it a special order?

Some brands are stocked locally and others are ordered in from overseas. If it’s a special order, we confirm the lead time when you order, and special orders are paid in full before we place them.

Will it affect my warranty?

The manufacturer’s warranty covers the part, and we manage any claim. If it’s fitted elsewhere, we’ll need proof it was fitted by a qualified workshop.

Can I return it?

Change-of-mind returns are only available on selected locally stocked brands, such as H&R and Bilstein: unopened and unfitted, within 30 days of delivery, with a 20% restocking fee and you covering return freight. Imported and special order parts can’t be returned for change of mind.