Exhaust System
Abarth 500/500C
Sale · 0% off You save $-4,858Ends 17 December
Shipped Australia wide, or fitted in our Sydenham workshop
Ask the workshop on (02) 9557 3739
Akrapovic Exhaust System for the Abarth 500/500C.
About Akrapovič exhaust systems
An Akrapovič exhaust system replaces the factory system from the manifold or the catalyst back, and is developed for one car rather than adapted. The work goes into three things at once: how much the system weighs, how the gas flows through it, and what the car sounds like at every point in the rev range.
Components are made from titanium, stainless steel or Inconel depending on the system, with cast parts produced in Akrapovič's own foundry. The material for this system is named in the title and the specification.
Add a stainless steel Slip-On exhaust system and make the Abarth (1.4 16V T Jet) even faster, even more responsive, and give it an even more striking look and that unmistakable sporty Akrapovic sound. The biggest difference compared to stock is most noticeable when the optional Akrapovic sound kit for adjustable sound is used. When the exhaust valve is open, the sound becomes significantly deeper and tastefully louder, but still entirely without droning. Performance facts apply to the performance exhaust with the Akrapovic sound kit and open valves. The system without the Akrapovic sound kit has a point-welded block in the link pipe that prevents bypassing the muffler. Please note: when the bypass is unblocked, the EC type approval is not valid. Complete the look with a set of exquisite 115 mm tailpipes in either titanium or carbon fibre.
Warning: This product will not fit on US spec Abarth.
The optional Akrapovic Sound Kit enables owners of selected Akrapovic car exhausts to control the sound of the system from the cockpit of their machine. Using Akrapovic technology, drivers can easily switch between the quiet mode and a sportier sound. With the use of a receiver to drive the actuators that open or close the valves at the end of the exhaust system, drivers can use the Sound Remote Controller to regulate the valves.
The system M-FI/SS/1H/1 was homologated in open valve position.
Specification
- Power: 107.2 kW at 5,160 rpm standard, 108.9 kW at 5,200 rpm with Akrapovič, up to + 2.4 kW at 4,100 rpm
- Torque: 227.9 Nm at 3,660 rpm standard, 232.0 Nm at 3,700 rpm with Akrapovič, up to + 5.3 Nm at 3,860 rpm
- Weight: 13.2 kg standard, 10.3 kg with Akrapovič, 2.9 kg saved
- Weight saving: 22.0%
- Listed by Akrapovič for: Abarth - 500/500C (2008 - 2017)
- Sold separately: Wireless Kit (P-HF876)Add-ons are not part of this kit or its price. Each is listed as its own product.
- Offered in 2 versions, listed as options on this page
- Part number M-FI/SS/1H-KIT+TP-CS/1
What you receive
- Slip-On Line (SS) (M-FI/SS/1H)
Shipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.
Workshop
- Fitting
- Available at our Sydenham workshop
Shipped to you
We ship Australia wide. Stocked parts usually leave within 2 business days. Special order parts are confirmed with a lead time when you order.
Fitted at Heasmans
Prefer us to fit it? Tick “Have us fit it” or book a fitting date and we’ll do it in our Sydenham workshop. Suspension work finishes with a wheel alignment, so the vehicle leaves set up properly.
Warranty
The manufacturer’s warranty covers the parts, and we manage any claim for you. If they’re fitted elsewhere, we’ll need proof of fitting by a qualified workshop.
Not sure this is the right part?
Tell us your car and what you’re after, and we’ll tell you if something else suits better, even if it’s cheaper.
Or call (02) 9557 3739
We reply Monday to Friday, 9:00am to 5:30pm.
Questions we get asked
Will this fit my car?
Check the Fitment list on the product, or use Shop by vehicle at the top of the page. If you’re not sure, send us your vehicle details or rego with the form above and we’ll confirm before you order.
Can you fit it for me?
Yes. We fit what we sell in our Sydenham workshop. Tick “Have us fit it” when you order, or ask us for a fitting date.
Is it a special order?
Some brands are stocked locally and others are ordered in from overseas. If it’s a special order, we confirm the lead time when you order, and special orders are paid in full before we place them.
Will it affect my warranty?
The manufacturer’s warranty covers the part, and we manage any claim. If it’s fitted elsewhere, we’ll need proof it was fitted by a qualified workshop.
Can I return it?
Change-of-mind returns are only available on selected locally stocked brands, such as H&R and Bilstein: unopened and unfitted, within 30 days of delivery, with a 20% restocking fee and you covering return freight. Imported and special order parts can’t be returned for change of mind.

