{"title":"Volkswagen Golf GTi (MK8)","description":"\u003cp\u003eSuspension, brakes and intakes for the Volkswagen Golf GTi (MK8) from KW, H\u0026amp;R and ST Suspensions. Fitted at Sydenham or shipped Australia wide.\u003c\/p\u003e","products":[{"product_id":"handr-extended-wheel-bolt-m14x1-5-round-head-4","title":"H\u0026R Extended Wheel Bolt M14x1.5 Round Head [RF-M14x1.5-GTI]","description":"\u003cp\u003eH\u0026amp;R Extended Wheel Bolts for the H\u0026amp;R Extended Wheel Bolt M14x1.5 Round Head.\u003c\/p\u003e\u003ch3\u003eAbout the H\u0026amp;R Extended Wheel Bolts\u003c\/h3\u003e\u003cp\u003eFitting a spacer moves the wheel away from the hub, so the original bolts no longer reach far enough to hold it safely. Extended bolts restore the thread engagement, with the same seat profile as the original so the wheel still centres correctly.\u003c\/p\u003e\u003cp\u003eBolts are priced individually and the length needed depends on the spacer width, which is listed in the specification. Thread size, length and seat type must be checked against your wheels and hubs before fitting.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt lengths below assume the original wheels\u003c\/li\u003e\n\u003cli\u003eFor a 3mm spacer, use bolt 1453103\u003c\/li\u003e\n\u003cli\u003eFor a 5mm spacer, use bolt 1453503\u003c\/li\u003e\n\u003cli\u003eFor a 8mm spacer, use bolt 1453703\u003c\/li\u003e\n\u003cli\u003eFor a 10mm spacer, use bolt 1454003\u003c\/li\u003e\n\u003cli\u003eFor a 12mm spacer, use bolt 1454003\u003c\/li\u003e\n\u003cli\u003eFor a 15mm spacer, use bolt 1454303\u003c\/li\u003e\n\u003cli\u003eFor a 20mm spacer, use bolt 1454703\u003c\/li\u003e\n\u003cli\u003ePriced per bolt\u003c\/li\u003e\n\u003cli\u003eAvailable in silver or black\u003c\/li\u003e\n\u003cli\u003eHigh strength steel\u003c\/li\u003e\n\u003cli\u003eCorrect seat profile for a secure fit\u003c\/li\u003e\n\u003cli\u003ePart number RF-M14x1.5-GTI\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVolkswagen Golf 1K Hatchback, 2005 to 2009\u003c\/li\u003e\n\u003cli\u003eVolkswagen Golf 5K Hatchback, 2009 to 2013\u003c\/li\u003e\n\u003cli\u003eVolkswagen Golf CD Mk8 Hatchback, 2021 to current\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSet of H\u0026amp;R extended wheel bolts\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eConfirm thread size, length and seat type suit your wheels and hubs before fitting.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. H\u0026amp;R warranty applies.\u003c\/p\u003e","brand":"H\u0026R Suspension","offers":[{"title":"Default Title","offer_id":45855361892431,"sku":"RF-M14x1.5-GTI","price":9.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/RF-S-1_e6ab095e-dd20-4ebc-80b6-e008c157277d.png?v=1781679891"},{"product_id":"handr-sport-springs-for-volkswagen-golf-gti-type-mk8","title":"H\u0026R VSS Height Adjustable Springs - Volkswagen Golf GTI Type MK8","description":"\u003cp\u003eH\u0026amp;R VSS Height Adjustable Springs for the Volkswagen Golf GTI Type MK8, adjustable 20-30mm front, 15-30mm rear.\u003c\/p\u003e\u003ch3\u003eAbout the H\u0026amp;R VSS Height Adjustable Springs\u003c\/h3\u003e\u003cp\u003eThe VSS system is a spring kit with an adjustable perch, so the ride height can be set anywhere within a range rather than fixed at one drop. The car keeps its factory dampers, and on cars with electronic damping that system keeps working.\u003c\/p\u003e\u003cp\u003eThe adjustment range for this vehicle is listed in the specification. Where a car is offered with and without adaptive dampers, the range differs, and both are listed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdjustment range: 20-30mm front, 15-30mm rear\u003c\/li\u003e\n\u003cli\u003eNot for EXCL GTE \u0026amp; Hybrid models\u003c\/li\u003e\n\u003cli\u003eHeight adjustable spring perches\u003c\/li\u003e\n\u003cli\u003eKeeps the factory dampers and any electronic damper control\u003c\/li\u003e\n\u003cli\u003eHardened and tempered spring steel\u003c\/li\u003e\n\u003cli\u003ePart number 23022-2-wc730\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eVolkswagen Golf CD Mk8 Hatchback, 2021 to current\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH\u0026amp;R VSS Height Adjustable Springs\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eProfessional fitting and a wheel alignment are recommended after installation.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. H\u0026amp;R warranty applies.\u003c\/p\u003e","brand":"H\u0026R Suspension","offers":[{"title":"Default Title","offer_id":45855551520847,"sku":"23022-2-wc730","price":1529.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/x-HR-Gewindefedern-Stdandardbilder-6-Hinweistext-scaled_ff4e5407-1c12-462f-885c-4b6a9bc7610a.jpg?v=1781680186"},{"product_id":"handr-sway-bar-for-volkswagen-golf-gti-type-mk8","title":"H\u0026R Sway Bar Kit - Volkswagen Golf GTI Type MK8 [33639-4-wc711]","description":"\u003cp\u003eH\u0026amp;R Sway Bar Kit for the Volkswagen Golf GTI Type MK8.\u003c\/p\u003e\u003ch3\u003eAbout the H\u0026amp;R Sway Bar Kit\u003c\/h3\u003e\u003cp\u003eAn H\u0026amp;R Sway Bar Kit stiffens the car in roll, so it stays flatter through a corner and settles sooner afterwards. Because a sway bar only works when the two wheels on an axle move differently, ride quality over bumps is largely unchanged.\u003c\/p\u003e\u003cp\u003eMost bars carry more than one mounting hole, which lets the rate be adjusted after fitting. The bar thickness and the number of positions for this vehicle are listed in the specification.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e28mm front bar, 2 adjustment positions and 26mm rear bar, fixed rate\u003c\/li\u003e\n\u003cli\u003eDirect fit to the factory mounting points\u003c\/li\u003e\n\u003cli\u003ePart number 33639-4-wc711\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eVolkswagen Golf CD Mk8 Hatchback, 2021 to current\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH\u0026amp;R Sway Bar Kit\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eProfessional fitting is recommended.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. H\u0026amp;R warranty applies.\u003c\/p\u003e","brand":"H\u0026R Suspension","offers":[{"title":"Default Title","offer_id":45855628492879,"sku":"33639-4-wc711","price":1133.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/Stabi_einzeln-1-scaled_1d6d037f-cd65-4767-ba05-5964a8d4029c.jpg?v=1781680298"},{"product_id":"handr-sway-bar-for-volkswagen-golf-gti-type-mk8-1","title":"H\u0026R Sway Bar Kit - Volkswagen Golf GTI Type MK8 [33639-2-wc710]","description":"\u003cp\u003eH\u0026amp;R Sway Bar Kit for the Volkswagen Golf GTI Type MK8.\u003c\/p\u003e\u003ch3\u003eAbout the H\u0026amp;R Sway Bar Kit\u003c\/h3\u003e\u003cp\u003eAn H\u0026amp;R Sway Bar Kit stiffens the car in roll, so it stays flatter through a corner and settles sooner afterwards. Because a sway bar only works when the two wheels on an axle move differently, ride quality over bumps is largely unchanged.\u003c\/p\u003e\u003cp\u003eMost bars carry more than one mounting hole, which lets the rate be adjusted after fitting. The bar thickness and the number of positions for this vehicle are listed in the specification.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e26mm front bar, 2 adjustment positions and 24mm rear bar, fixed rate\u003c\/li\u003e\n\u003cli\u003eDirect fit to the factory mounting points\u003c\/li\u003e\n\u003cli\u003ePart number 33639-2-wc710\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eVolkswagen Golf CD Mk8 Hatchback, 2021 to current\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH\u0026amp;R Sway Bar Kit\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eProfessional fitting is recommended.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. H\u0026amp;R warranty applies.\u003c\/p\u003e","brand":"H\u0026R Suspension","offers":[{"title":"Default Title","offer_id":45855628525647,"sku":"33639-2-wc710","price":1133.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/Stabi_einzeln-1-scaled_1242aee0-07d0-44bf-afc3-4cd5b12747cb.jpg?v=1781680300"},{"product_id":"handr-sport-springs-for-volkswagen-golf-gti-type-mk8-1","title":"H\u0026R Sport Springs - Volkswagen Golf GTI Type MK8","description":"\u003cp\u003eH\u0026amp;R Sport Springs for the Volkswagen Golf GTI Type MK8, lowering 40mm.\u003c\/p\u003e\u003ch3\u003eAbout the H\u0026amp;R Sport Springs\u003c\/h3\u003e\u003cp\u003eH\u0026amp;R Sport Springs lower the car to close the gap between the tyre and the guard, and firm up the rate so the body settles more quickly. The progressive rate means the spring stays comfortable over normal road use and only stiffens as it compresses, which is what keeps a lowered car liveable day to day.\u003c\/p\u003e\u003cp\u003eThey work with the factory dampers and use the standard mounting points, so nothing else has to change. The drop for this vehicle is listed in the specification.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLowering: 40mm\u003c\/li\u003e\n\u003cli\u003eNot for EXCL GTE \u0026amp; Hybrid models\u003c\/li\u003e\n\u003cli\u003eProgressive spring rate\u003c\/li\u003e\n\u003cli\u003eHardened and tempered spring steel\u003c\/li\u003e\n\u003cli\u003eWorks with the factory dampers\u003c\/li\u003e\n\u003cli\u003ePart number 28639-8-wc651\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eVolkswagen Golf CD Mk8 Hatchback, 2021 to current\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH\u0026amp;R Sport Springs\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eProfessional fitting and a wheel alignment are recommended after installation.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. H\u0026amp;R warranty applies.\u003c\/p\u003e","brand":"H\u0026R Suspension","offers":[{"title":"Default Title","offer_id":45855792005199,"sku":"28639-8-wc651","price":792.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/Tieferlegungsfedersatz_792ced71-3695-44dc-b463-47a186c8fdd3.jpg?v=1781680527"},{"product_id":"handr-wheel-spacers-volkswagen-golf-type-mk8","title":"H\u0026R Wheel Spacers - Volkswagen GOLF Type MK8","description":"\u003cp\u003eH\u0026amp;R TRAK+ Wheel Spacers for the Volkswagen GOLF Type MK8.\u003c\/p\u003e\u003ch3\u003eAbout the H\u0026amp;R TRAK+ Wheel Spacers\u003c\/h3\u003e\u003cp\u003eTRAK+ spacers push the wheels outward to widen the track and fill the guards. Each pair covers one axle, and the sizes are quoted per axle with the amount each side in brackets, so a 20mm spacer moves each wheel out 10mm.\u003c\/p\u003e\u003cp\u003eThey are hub centric, machined from forged aluminium, and supplied with the extended bolts sized to suit the spacer chosen. Running a different width front and rear is normal: add the front size, then add the rear size as a second item, and each pair arrives with the right bolts.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6mm per axle, 3mm per side, part 0655571, extended bolt 1453103\u003c\/li\u003e\n\u003cli\u003e16mm per axle, 8mm per side, part 1655573, extended bolt 1453703\u003c\/li\u003e\n\u003cli\u003e20mm per axle, 10mm per side, part 2055573A, extended bolt 1454003\u003c\/li\u003e\n\u003cli\u003e24mm per axle, 12mm per side, part 2455571, extended bolt 1454003\u003c\/li\u003e\n\u003cli\u003e30mm per axle, 15mm per side, part 3055571, extended bolt 1454303\u003c\/li\u003e\n\u003cli\u003e40mm per axle, 20mm per side, part 4055571, extended bolt 1454703\u003c\/li\u003e\n\u003cli\u003eHub centric\u003c\/li\u003e\n\u003cli\u003eMachined from forged aluminium\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair, enough for one axle\u003c\/li\u003e\n\u003cli\u003eSilver or black anodised finish\u003c\/li\u003e\n\u003cli\u003ePart number 0655571\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVolkswagen Golf CD Hatchback, 2022 to current\u003c\/li\u003e\n\u003cli\u003eVolkswagen Golf CD Mk8 Hatchback, 2021 to current\u003c\/li\u003e\n\u003cli\u003eVolkswagen Golf CD Wagon, 2021 to current\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 x H\u0026amp;R TRAK+ wheel spacers (one axle)\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eExtended wheel bolts are required. The correct length changes with the spacer thickness, so choose Included above and the right bolt comes with it.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. H\u0026amp;R warranty applies.\u003c\/p\u003e","brand":"H\u0026R Suspension","offers":[{"title":"6mm per axle (3mm per side) \/ Silver \/ Not included","offer_id":46786268266575,"sku":"0655571","price":170.0,"currency_code":"AUD","in_stock":true},{"title":"6mm per axle (3mm per side) \/ Silver \/ Included, 10 silver bolts for this axle","offer_id":46786268299343,"sku":"0655571+1453103","price":265.0,"currency_code":"AUD","in_stock":true},{"title":"6mm per axle (3mm per side) \/ Silver \/ Included, 10 black bolts for this axle","offer_id":46786268332111,"sku":"0655571+1453103-B","price":265.0,"currency_code":"AUD","in_stock":true},{"title":"6mm per axle (3mm per side) \/ Black \/ Not included","offer_id":46786268364879,"sku":"0655571-B","price":170.0,"currency_code":"AUD","in_stock":true},{"title":"6mm per axle (3mm per side) \/ Black \/ Included, 10 silver bolts for this axle","offer_id":46786268397647,"sku":"0655571-B+1453103","price":265.0,"currency_code":"AUD","in_stock":true},{"title":"6mm per axle (3mm per side) \/ Black \/ Included, 10 black bolts for this axle","offer_id":46786268430415,"sku":"0655571-B+1453103-B","price":265.0,"currency_code":"AUD","in_stock":true},{"title":"16mm per axle (8mm per side) \/ Silver \/ Not included","offer_id":46786268463183,"sku":"1655573","price":225.0,"currency_code":"AUD","in_stock":true},{"title":"16mm per axle (8mm per side) \/ Silver \/ Included, 10 silver bolts for this axle","offer_id":46786268495951,"sku":"1655573+1453703","price":320.0,"currency_code":"AUD","in_stock":true},{"title":"16mm per axle (8mm per side) \/ Silver \/ Included, 10 black bolts for this axle","offer_id":46786268528719,"sku":"1655573+1453703-B","price":320.0,"currency_code":"AUD","in_stock":true},{"title":"16mm per axle (8mm per side) \/ Black \/ Not included","offer_id":46786268561487,"sku":"1655573-B","price":225.0,"currency_code":"AUD","in_stock":true},{"title":"16mm per axle (8mm per side) \/ Black \/ Included, 10 silver bolts for this axle","offer_id":46786268594255,"sku":"1655573-B+1453703","price":320.0,"currency_code":"AUD","in_stock":true},{"title":"16mm per axle (8mm per side) \/ Black \/ Included, 10 black bolts for this axle","offer_id":46786268627023,"sku":"1655573-B+1453703-B","price":320.0,"currency_code":"AUD","in_stock":true},{"title":"20mm per axle (10mm per side) \/ Silver \/ Not included","offer_id":46786268659791,"sku":"2055573A","price":270.0,"currency_code":"AUD","in_stock":true},{"title":"20mm per axle (10mm per side) \/ Silver \/ Included, 10 silver bolts for this axle","offer_id":46786268692559,"sku":"2055573A+1454003","price":365.0,"currency_code":"AUD","in_stock":true},{"title":"20mm per axle (10mm per side) \/ Silver \/ Included, 10 black bolts for this axle","offer_id":46786268725327,"sku":"2055573A+1454003-B","price":365.0,"currency_code":"AUD","in_stock":true},{"title":"20mm per axle (10mm per side) \/ Black \/ Not included","offer_id":46786268758095,"sku":"2055573A-B","price":270.0,"currency_code":"AUD","in_stock":true},{"title":"20mm per axle (10mm per side) \/ Black \/ Included, 10 silver bolts for this axle","offer_id":46786268790863,"sku":"2055573A-B+1454003","price":365.0,"currency_code":"AUD","in_stock":true},{"title":"20mm per axle (10mm per side) \/ Black \/ Included, 10 black bolts for this axle","offer_id":46786268823631,"sku":"2055573A-B+1454003-B","price":365.0,"currency_code":"AUD","in_stock":true},{"title":"24mm per axle (12mm per side) \/ Silver \/ Not included","offer_id":46786268856399,"sku":"2455571","price":285.0,"currency_code":"AUD","in_stock":true},{"title":"24mm per axle (12mm per side) \/ Silver \/ Included, 10 silver bolts for this axle","offer_id":46786268889167,"sku":"2455571+1454003","price":380.0,"currency_code":"AUD","in_stock":true},{"title":"24mm per axle (12mm per side) \/ Silver \/ Included, 10 black bolts for this axle","offer_id":46786268921935,"sku":"2455571+1454003-B","price":380.0,"currency_code":"AUD","in_stock":true},{"title":"24mm per axle (12mm per side) \/ Black \/ Not included","offer_id":46786268954703,"sku":"2455571-B","price":285.0,"currency_code":"AUD","in_stock":true},{"title":"24mm per axle (12mm per side) \/ Black \/ Included, 10 silver bolts for this axle","offer_id":46786268987471,"sku":"2455571-B+1454003","price":380.0,"currency_code":"AUD","in_stock":true},{"title":"24mm per axle (12mm per side) \/ Black \/ Included, 10 black bolts for this axle","offer_id":46786269020239,"sku":"2455571-B+1454003-B","price":380.0,"currency_code":"AUD","in_stock":true},{"title":"30mm per axle (15mm per side) \/ Silver \/ Not included","offer_id":46786269053007,"sku":"3055571","price":308.0,"currency_code":"AUD","in_stock":true},{"title":"30mm per axle (15mm per side) \/ Silver \/ Included, 10 silver bolts for this axle","offer_id":46786269085775,"sku":"3055571+1454303","price":403.0,"currency_code":"AUD","in_stock":true},{"title":"30mm per axle (15mm per side) \/ Silver \/ Included, 10 black bolts for this axle","offer_id":46786269118543,"sku":"3055571+1454303-B","price":403.0,"currency_code":"AUD","in_stock":true},{"title":"30mm per axle (15mm per side) \/ Black \/ Not included","offer_id":46786269151311,"sku":"3055571-B","price":308.0,"currency_code":"AUD","in_stock":true},{"title":"30mm per axle (15mm per side) \/ Black \/ Included, 10 silver bolts for this axle","offer_id":46786269184079,"sku":"3055571-B+1454303","price":403.0,"currency_code":"AUD","in_stock":true},{"title":"30mm per axle (15mm per side) \/ Black \/ Included, 10 black bolts for this axle","offer_id":46786269216847,"sku":"3055571-B+1454303-B","price":403.0,"currency_code":"AUD","in_stock":true},{"title":"40mm per axle (20mm per side) \/ Silver \/ Not included","offer_id":46786269249615,"sku":"4055571","price":330.0,"currency_code":"AUD","in_stock":true},{"title":"40mm per axle (20mm per side) \/ Silver \/ Included, 10 silver bolts for this axle","offer_id":46786269282383,"sku":"4055571+1454703","price":425.0,"currency_code":"AUD","in_stock":true},{"title":"40mm per axle (20mm per side) \/ Silver \/ Included, 10 black bolts for this axle","offer_id":46786269315151,"sku":"4055571+1454703-B","price":425.0,"currency_code":"AUD","in_stock":true},{"title":"40mm per axle (20mm per side) \/ Black \/ Not included","offer_id":46786269347919,"sku":"4055571-B","price":330.0,"currency_code":"AUD","in_stock":true},{"title":"40mm per axle (20mm per side) \/ Black \/ Included, 10 silver bolts for this axle","offer_id":46786269380687,"sku":"4055571-B+1454703","price":425.0,"currency_code":"AUD","in_stock":true},{"title":"40mm per axle (20mm per side) \/ Black \/ Included, 10 black bolts for this axle","offer_id":46786269413455,"sku":"4055571-B+1454703-B","price":425.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/DR-S_de8dd753-ef95-46d5-8d0c-94378b9142fd.png?v=1789536780"},{"product_id":"bilstein-b14-front-and-rear-coilover-kit-for-volkswagen-golf-mk8-2021-on-15-35mm","title":"Bilstein B14 Front and Rear Coilover Kit for Volkswagen Golf MK8 2021 on (15-35mm)","description":"\u003cp\u003eBilstein B14 front and rear coilover kit for the Volkswagen Golf MK8 2021 on, with 15-35mm of adjustable lowering.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B14\u003c\/h3\u003e\u003cp\u003eThe B14 is Bilstein's coilover kit with height adjustable spring perches and fixed damping, sold as a matched front and rear set. The damping is tuned by Bilstein to suit the lowering range, so there is nothing to set up beyond choosing the ride height. The kits are TUV approved in Germany, which means the drop range quoted has been tested rather than estimated.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: front and rear\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 15-35mm\u003c\/li\u003e\n\u003cli\u003eHeight adjustable spring perches, fixed damping\u003c\/li\u003e\n\u003cli\u003eMatched front and rear kit\u003c\/li\u003e\n\u003cli\u003eNot for vehicles with Electronic Damping Control (EDC)\u003c\/li\u003e\n\u003cli\u003eFor vehicles with a multi-link rear axle\u003c\/li\u003e\n\u003cli\u003ePart number 47-251588\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVolkswagen Golf CD Hatchback, 2022 to current\u003c\/li\u003e\n\u003cli\u003eVolkswagen Golf CD Mk8 Hatchback, 2021 to current\u003c\/li\u003e\n\u003cli\u003eVolkswagen Golf CD Wagon, 2021 to current\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811457093711,"sku":"47-251588","price":2750.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/47-251588_c9778238-c07c-4c1d-b7bf-821246aa4b4e.jpg?v=1789780352"},{"product_id":"bilstein-evo-s-front-and-rear-coilover-kit-for-volkswagen-golf-mk8-2021-on-10-30mm-0-30mm","title":"Bilstein EVO S Front and Rear Coilover Kit for Volkswagen Golf MK8 2021 on (10-30mm \/ 0-30mm)","description":"\u003cp\u003eBilstein EVO front and rear s coilover kit for the Volkswagen Golf MK8 2021 on, with 10-30mm \/ 0-30mm of adjustable lowering.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein EVO\u003c\/h3\u003e\u003cp\u003eThe EVO range is Bilstein's motorsport oriented coilover line, aimed at cars used on track as well as the road. Damping is adjustable and the kits are supplied matched front and rear.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: front and rear\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 10-30mm \/ 0-30mm\u003c\/li\u003e\n\u003cli\u003eAdjustable damping, matched front and rear kit\u003c\/li\u003e\n\u003cli\u003eNot for vehicles with Electronic Damping Control (EDC)\u003c\/li\u003e\n\u003cli\u003eFor vehicles with a multi-link rear axle\u003c\/li\u003e\n\u003cli\u003ePart number 47-342941\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVolkswagen Golf CD Hatchback, 2022 to current\u003c\/li\u003e\n\u003cli\u003eVolkswagen Golf CD Mk8 Hatchback, 2021 to current\u003c\/li\u003e\n\u003cli\u003eVolkswagen Golf CD Wagon, 2021 to current\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811457192015,"sku":"47-342941","price":2640.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/47-309067_f101c7c3-29c1-45dc-b98d-4b3d8de0cbe7.jpg?v=1789780352"},{"product_id":"bilstein-b16-dt-front-and-rear-coilover-kit-for-volkswagen-golf-mk8-2021-on-15-35mm","title":"Bilstein B16 DT Front and Rear Coilover Kit for Volkswagen Golf MK8 2021 on (15-35mm)","description":"\u003cp\u003eBilstein B16 front and rear dt coilover kit for the Volkswagen Golf MK8 2021 on, with 15-35mm of adjustable lowering.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B16\u003c\/h3\u003e\u003cp\u003eThe B16 is Bilstein's coilover kit with both height adjustment and adjustable damping, so compression and rebound can be tuned to the road, the tyre and the driver rather than fixed at the factory. Kits come matched front and rear, built around the same monotube construction used across the range.\u003c\/p\u003e\u003cp\u003eWorth having if the car is driven on track, or if you want to be able to change its character after it is fitted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: front and rear\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 15-35mm\u003c\/li\u003e\n\u003cli\u003eHeight adjustable spring perches, adjustable damping\u003c\/li\u003e\n\u003cli\u003eMatched front and rear kit\u003c\/li\u003e\n\u003cli\u003eFor vehicles with a multi-link rear axle\u003c\/li\u003e\n\u003cli\u003eFor vehicles with Electronic Damping Control (EDC)\u003c\/li\u003e\n\u003cli\u003ePart number 49-255874\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVolkswagen Golf CD Hatchback, 2022 to current\u003c\/li\u003e\n\u003cli\u003eVolkswagen Golf CD Mk8 Hatchback, 2021 to current\u003c\/li\u003e\n\u003cli\u003eVolkswagen Golf CD Wagon, 2021 to current\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811457323087,"sku":"49-255874","price":4840.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/49-255874_36c34348-815d-4239-864a-48dc2202ec62.jpg?v=1789780353"},{"product_id":"bilstein-b16-front-and-rear-coilover-kit-for-volkswagen-golf-mk8-2021-on-15-35mm","title":"Bilstein B16 Front and Rear Coilover Kit for Volkswagen Golf MK8 2021 on (15-35mm)","description":"\u003cp\u003eBilstein B16 front and rear coilover kit for the Volkswagen Golf MK8 2021 on, with 15-35mm of adjustable lowering.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B16\u003c\/h3\u003e\u003cp\u003eThe B16 is Bilstein's coilover kit with both height adjustment and adjustable damping, so compression and rebound can be tuned to the road, the tyre and the driver rather than fixed at the factory. Kits come matched front and rear, built around the same monotube construction used across the range.\u003c\/p\u003e\u003cp\u003eWorth having if the car is driven on track, or if you want to be able to change its character after it is fitted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: front and rear\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 15-35mm\u003c\/li\u003e\n\u003cli\u003eHeight adjustable spring perches, adjustable damping\u003c\/li\u003e\n\u003cli\u003eMatched front and rear kit\u003c\/li\u003e\n\u003cli\u003eNot for vehicles with Electronic Damping Control (EDC)\u003c\/li\u003e\n\u003cli\u003eFor vehicles with a multi-link rear axle\u003c\/li\u003e\n\u003cli\u003ePart number 48-251570\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVolkswagen Golf CD Hatchback, 2022 to current\u003c\/li\u003e\n\u003cli\u003eVolkswagen Golf CD Mk8 Hatchback, 2021 to current\u003c\/li\u003e\n\u003cli\u003eVolkswagen Golf CD Wagon, 2021 to current\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811457388623,"sku":"48-251570","price":4180.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/48-251570_9268aa46-753d-43b7-a703-6bfacaf1c5c2.jpg?v=1789780353"},{"product_id":"kw-coilover-kit-v1-for-vw-golf-viii-cd1-102800ct","title":"KW V1 Coilover Kit - Volkswagen Golf (CD) (Mk8)","description":"\u003cp\u003eKW V1 Coilover Kit for the Volkswagen Golf (CD) (Mk8).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: 30 TDI, 35 TDI, 2.0 GTI, 2.0 GTI Clubsport, 2.0 TDI, 2.0 TDI GTD, 2.0 TSI\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Volkswagen Golf (CD) (Mk8)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eFor cars which have electronic dampers, make sure they are shut down. Specific electronical damper shut-downs are available from KW. Please check our accessories list\u003c\/li\u003e\n\u003cli\u003eOnly for cars with a clamp diameter of 55mm on the front axle\u003c\/li\u003e\n\u003cli\u003ePart number 102800CT\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eVolkswagen Golf, 2021 to current\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841450725455,"sku":"102800CT","price":2022.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000912.jpg?v=1789944084"},{"product_id":"kw-coilover-kit-v1-for-vw-golf-viii-cd1-w-deactivation-for-electronic-dampers-102800cv","title":"KW V1 Coilover Kit - Volkswagen Golf (CD) (Mk8) (EDC Deactivation Included)","description":"\u003cp\u003eKW V1 Coilover Kit for the Volkswagen Golf (CD) (Mk8).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eIncludes the deactivation kit for the factory electronic dampers\u003c\/li\u003e\n\u003cli\u003eSuits engines: 30 TDI, 35 TDI, 1.5 eTSI, 1.5 TSI, 2.0 TDI, 2.0 TSI, 2.0 GTI, 2.0 GTI Clubsport, 2.0 TDI GTD\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Volkswagen Golf (CD) (Mk8)\u003c\/li\u003e\n\u003cli\u003eDampers are adjusted by easily operating adjustment wheels. Rebound is only adjustable if the top of the piston rod is accessible. This will depend on the vehicle construction.\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eElectronic damping control has to be deactivated. Deactivation kit is included in the delivery.\u003c\/li\u003e\n\u003cli\u003eOnly for cars with a clamp diameter of 55mm on the front axle\u003c\/li\u003e\n\u003cli\u003ePart number 102800CV\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eVolkswagen Golf, 2021 to current\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841450889295,"sku":"102800CV","price":2295.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000914.jpg?v=1789944081"},{"product_id":"kw-coilover-kit-v2-for-vw-golf-viii-cd1-152800ct","title":"KW V2 Coilover Kit - Volkswagen Golf (CD) (Mk8)","description":"\u003cp\u003eKW V2 Coilover Kit for the Volkswagen Golf (CD) (Mk8).\u003c\/p\u003e\u003ch3\u003eAbout the KW V2\u003c\/h3\u003e\u003cp\u003eThe KW V2 adds rebound adjustment to the height adjustable coilover. Rebound controls how the car settles after a bump or a direction change, so the ride can be firmed for a back road or softened for a rough one without changing the ride height.\u003c\/p\u003e\u003cp\u003eCompression damping is set by KW for the specific car. Struts are stainless steel and the springs are matched to the damper as a pair.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eRebound adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: 30 TDI, 35 TDI, 2.0 GTI, 2.0 GTI Clubsport, 2.0 TDI, 2.0 TDI GTD, 2.0 TSI\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Volkswagen Golf (CD) (Mk8)\u003c\/li\u003e\n\u003cli\u003eDampers are adjusted by easily operating adjustment wheels. Rebound is only adjustable if the top of the piston rod is accessible. This will depend on the vehicle construction.\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eFor cars which have electronic dampers, make sure they are shut down. Specific electronical damper shut-downs are available from KW. Please check our accessories list\u003c\/li\u003e\n\u003cli\u003eOnly for cars with a clamp diameter of 55mm on the front axle\u003c\/li\u003e\n\u003cli\u003ePart number 152800CT\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eVolkswagen Golf, 2021 to current\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841479888975,"sku":"152800CT","price":3267.05,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0002065.jpg?v=1789944244"},{"product_id":"kw-coilover-kit-v2-for-vw-golf-viii-cd1-w-deactivation-for-electronic-dampers-152800cv","title":"KW V2 Coilover Kit - Volkswagen Golf (CD) (Mk8) (EDC Deactivation Included)","description":"\u003cp\u003eKW V2 Coilover Kit for the Volkswagen Golf (CD) (Mk8).\u003c\/p\u003e\u003ch3\u003eAbout the KW V2\u003c\/h3\u003e\u003cp\u003eThe KW V2 adds rebound adjustment to the height adjustable coilover. Rebound controls how the car settles after a bump or a direction change, so the ride can be firmed for a back road or softened for a rough one without changing the ride height.\u003c\/p\u003e\u003cp\u003eCompression damping is set by KW for the specific car. Struts are stainless steel and the springs are matched to the damper as a pair.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eRebound adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eIncludes the deactivation kit for the factory electronic dampers\u003c\/li\u003e\n\u003cli\u003eSuits engines: 30 TDI, 35 TDI, 1.5 eTSI, 1.5 TSI, 2.0 TDI, 2.0 TSI, 2.0 GTI, 2.0 GTI Clubsport, 2.0 TDI GTD\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Volkswagen Golf (CD) (Mk8)\u003c\/li\u003e\n\u003cli\u003eDampers are adjusted by easily operating adjustment wheels. Rebound is only adjustable if the top of the piston rod is accessible. This will depend on the vehicle construction.\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eElectronic damping control has to be deactivated. Deactivation kit is included in the delivery.\u003c\/li\u003e\n\u003cli\u003eOnly for cars with a clamp diameter of 55mm on the front axle\u003c\/li\u003e\n\u003cli\u003ePart number 152800CV\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eVolkswagen Golf, 2021 to current\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841479921743,"sku":"152800CV","price":3656.55,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0002067.jpg?v=1789944244"},{"product_id":"kw-coilover-kit-v3-for-vw-golf-viii-cd1-w-deactivation-for-electronic-dampers-352800cv","title":"KW V3 Coilover Kit - Volkswagen Golf (CD) (Mk8) (EDC Deactivation Included)","description":"\u003cp\u003eKW V3 Coilover Kit for the Volkswagen Golf (CD) (Mk8).\u003c\/p\u003e\u003ch3\u003eAbout the KW V3\u003c\/h3\u003e\u003cp\u003eThe KW V3 is the adjustable coilover in the road range, with rebound and compression adjusted separately. Compression controls how the suspension takes the hit, rebound controls how it comes back, and separating the two is what lets a car be set up for a particular road, load or tyre.\u003c\/p\u003e\u003cp\u003eRide height is adjusted at the threaded strut body, and the damping adjustment is made by hand with click stops so a setting can be repeated. Struts are stainless steel.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eRebound and compression adjustable separately\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eIncludes the deactivation kit for the factory electronic dampers\u003c\/li\u003e\n\u003cli\u003eSuits engines: 30 TDI, 35 TDI, 1.5 eTSI, 1.5 TSI, 2.0 TDI, 2.0 TSI, 2.0 GTI, 2.0 GTI Clubsport, 2.0 TDI GTD\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Volkswagen Golf (CD) (Mk8)\u003c\/li\u003e\n\u003cli\u003eDampers are adjusted by easily operating adjustment wheels. Rebound is only adjustable if the top of the piston rod is accessible. This will depend on the vehicle construction.\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eElectronic damping control has to be deactivated. Deactivation kit is included in the delivery.\u003c\/li\u003e\n\u003cli\u003eOnly for cars with a clamp diameter of 55mm on the front axle\u003c\/li\u003e\n\u003cli\u003ePart number 352800CV\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eVolkswagen Golf, 2021 to current\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841868484687,"sku":"352800CV","price":4692.05,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0004747.jpg?v=1789945684"},{"product_id":"kw-coilover-kit-v3-clubsport-for-vw-golf-viii-cd1-w-fa-top-mounts-352808cw","title":"KW V3 Clubsport Coilover Kit - Volkswagen Golf (CD) (Mk8)","description":"\u003cp\u003eKW Clubsport coilover for the Volkswagen Golf (CD) (Mk8).\u003c\/p\u003e\u003ch3\u003eAbout KW Clubsport coilovers\u003c\/h3\u003e\u003cp\u003eKW Clubsport is the track focused coilover, supplied with top mounts so camber can be set at the strut rather than fought at the alignment rack. Damping is adjustable and the setup is firmer than the road range, which is the point of it.\u003c\/p\u003e\u003cp\u003eIt is road legal in Germany with TUV approval, but it is built for a car that spends time on a circuit.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eAdjustable damping\u003c\/li\u003e\n\u003cli\u003eSupplied with top mounts, camber adjustable on most applications\u003c\/li\u003e\n\u003cli\u003eSuits engines: 2.0 GTI, 2.0 GTI Clubsport, 2.0 TSI R 4motion\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Volkswagen Golf (CD) (Mk8)\u003c\/li\u003e\n\u003cli\u003eOnly for cars with a clamp diameter of 55mm on the front axle\u003c\/li\u003e\n\u003cli\u003eClubsport coilover with top mount: only with front axle top mount available\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eFor cars which have electronic dampers, make sure they are shut down. Specific electronical damper shut-downs are available from KW. Please check our accessories list\u003c\/li\u003e\n\u003cli\u003eDampers are adjusted by easily operating adjustment wheels. Rebound is only adjustable if the top of the piston rod is accessible. This will depend on the vehicle construction.\u003c\/li\u003e\n\u003cli\u003ePart number 352808CW\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eVolkswagen Golf, 2021 to current\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841868550223,"sku":"352808CW","price":6079.05,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0004800.jpg?v=1789945684"},{"product_id":"kw-coilover-kit-v3-for-vw-golf-viii-cd1-352800ct","title":"KW V3 Coilover Kit - Volkswagen Golf (CD) (Mk8)","description":"\u003cp\u003eKW V3 Coilover Kit for the Volkswagen Golf (CD) (Mk8).\u003c\/p\u003e\u003ch3\u003eAbout the KW V3\u003c\/h3\u003e\u003cp\u003eThe KW V3 is the adjustable coilover in the road range, with rebound and compression adjusted separately. Compression controls how the suspension takes the hit, rebound controls how it comes back, and separating the two is what lets a car be set up for a particular road, load or tyre.\u003c\/p\u003e\u003cp\u003eRide height is adjusted at the threaded strut body, and the damping adjustment is made by hand with click stops so a setting can be repeated. Struts are stainless steel.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eRebound and compression adjustable separately\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: 30 TDI, 35 TDI, 2.0 GTI, 2.0 GTI Clubsport, 2.0 TDI, 2.0 TDI GTD, 2.0 TSI\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Volkswagen Golf (CD) (Mk8)\u003c\/li\u003e\n\u003cli\u003eDampers are adjusted by easily operating adjustment wheels. Rebound is only adjustable if the top of the piston rod is accessible. This will depend on the vehicle construction.\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eFor cars which have electronic dampers, make sure they are shut down. Specific electronical damper shut-downs are available from KW. Please check our accessories list\u003c\/li\u003e\n\u003cli\u003eOnly for cars with a clamp diameter of 55mm on the front axle\u003c\/li\u003e\n\u003cli\u003ePart number 352800CT\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eVolkswagen Golf, 2021 to current\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841869140047,"sku":"352800CT","price":4340.55,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0004745.jpg?v=1789945692"},{"product_id":"kw-coilover-kit-ddc-plug-and-play-for-vw-golf-viii-cd1-39080058","title":"KW DDC Plug and Play Coilover Kit - Volkswagen Golf (CD) (Mk8)","description":"\u003cp\u003eKW DDC Plug \u0026amp; Play for the Volkswagen Golf (CD) (Mk8).\u003c\/p\u003e\u003ch3\u003eAbout KW DDC Plug \u0026amp; Play\u003c\/h3\u003e\u003cp\u003eDDC Plug \u0026amp; Play replaces the factory electronic dampers and connects to the car's own system, so the modes on the dash keep working and control the KW dampers instead. Ride height is adjustable at the strut.\u003c\/p\u003e\u003cp\u003eIt suits a car that came with adaptive damping and should keep it.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable at the strut\u003c\/li\u003e\n\u003cli\u003eConnects to the factory adaptive damping controls\u003c\/li\u003e\n\u003cli\u003eSuits engines: 1.5 eTSI, 1.5 TSI, 2.0 TDI, 2.0 TSI, 2.0 GTI, 2.0 GTI Clubsport, 2.0 TDI GTD\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Volkswagen Golf (CD) (Mk8)\u003c\/li\u003e\n\u003cli\u003eOnly for vehicles which have electronic dampers\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eOnly for cars with a clamp diameter of 55mm on the front axle\u003c\/li\u003e\n\u003cli\u003ePart number 39080058\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eVolkswagen Golf, 2021 to current\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841880051791,"sku":"39080058","price":5366.55,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0005177.jpg?v=1789945822"},{"product_id":"kw-coilover-kit-v4-clubsport-for-vw-golf-viii-cd1-w-fa-top-mounts-397802cw","title":"KW V4 Clubsport Coilover Kit - Volkswagen Golf (CD) (Mk8)","description":"\u003cp\u003eKW Clubsport coilover for the Volkswagen Golf (CD) (Mk8).\u003c\/p\u003e\u003ch3\u003eAbout KW Clubsport coilovers\u003c\/h3\u003e\u003cp\u003eKW Clubsport is the track focused coilover, supplied with top mounts so camber can be set at the strut rather than fought at the alignment rack. Damping is adjustable and the setup is firmer than the road range, which is the point of it.\u003c\/p\u003e\u003cp\u003eIt is road legal in Germany with TUV approval, but it is built for a car that spends time on a circuit.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eAdjustable damping\u003c\/li\u003e\n\u003cli\u003eSupplied with top mounts, camber adjustable on most applications\u003c\/li\u003e\n\u003cli\u003eSuits engines: 2.0 GTI, 2.0 GTI Clubsport, 2.0 TSI R 4motion\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Volkswagen Golf (CD) (Mk8)\u003c\/li\u003e\n\u003cli\u003eOnly for cars with a clamp diameter of 55mm on the front axle\u003c\/li\u003e\n\u003cli\u003eClubsport coilover with top mount: only with front axle top mount available\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eFor cars which have electronic dampers, make sure they are shut down. Specific electronical damper shut-downs are available from KW. Please check our accessories list\u003c\/li\u003e\n\u003cli\u003eDampers are adjusted by easily operating adjustment wheels. Rebound is only adjustable if the top of the piston rod is accessible. This will depend on the vehicle construction.\u003c\/li\u003e\n\u003cli\u003ePart number 397802CW\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eVolkswagen Golf, 2021 to current\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841882378319,"sku":"397802CW","price":9062.05,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0005253.jpg?v=1789945849"},{"product_id":"kw-leveling-suspension-v3-for-08-2012-vw-golf-vii-5g1-bq1-be1-be2-352088000n","title":"KW V3 Leveling Coilover Kit - Volkswagen Golf (CD) (Mk8) (EDC deactivation)","description":"\u003cp\u003eKW V3 Leveling Coilover Kit for the Volkswagen Golf (CD) (Mk8).\u003c\/p\u003e\u003ch3\u003eAbout the KW V3 Leveling\u003c\/h3\u003e\u003cp\u003eKW V3 Leveling is a V3 coilover with self levelling for the rear axle, built for cars that carry or tow weight and would otherwise sit down at the back. The system keeps the ride height where it was set regardless of what is loaded.\u003c\/p\u003e\u003cp\u003eRebound and compression stay independently adjustable, as on the standard V3.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eRebound and compression adjustable separately\u003c\/li\u003e\n\u003cli\u003eSelf levelling rear axle\u003c\/li\u003e\n\u003cli\u003eThis part number suits: Electronic dampers must be deactivated\u003c\/li\u003e\n\u003cli\u003eSuits engines: 2.0 GTI, 2.0 GTI Clubsport, 2.0 GTI Clubsport S, 2.0 GTI TCR, 1.0 eTSI, 1.0 TSI, 1.4 TSI, 1.5 eTSI, 1.5 TSI, 2.0 TDI, 2.0 TDI GTD, 2.0 TSI\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Volkswagen Golf (CD) (Mk8)\u003c\/li\u003e\n\u003cli\u003eDampers are adjusted by easily operating adjustment wheels. Rebound is only adjustable if the top of the piston rod is accessible. This will depend on the vehicle construction.\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eFor cars which have electronic dampers, make sure they are shut down. Specific electronical damper shut-downs are available from KW. Please check our accessories list\u003c\/li\u003e\n\u003cli\u003eOnly for cars with a clamp diameter of 55mm on the front axle\u003c\/li\u003e\n\u003cli\u003ePart number 352088000N\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eVolkswagen Golf, 2021 to current\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSeveral part numbers cover this vehicle. Check the specification against your car before ordering, or ask us.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841887850575,"sku":"352088000N","price":4236.05,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0012558.jpg?v=1789945892"},{"product_id":"kw-leveling-suspension-v3-for-08-2012-vw-golf-vii-5g1-bq1-be1-be2-352088000r","title":"KW V3 Leveling Coilover Kit - Volkswagen Golf (CD) (Mk8) (EDC Deactivation Included, Deactivation kit included)","description":"\u003cp\u003eKW V3 Leveling Coilover Kit for the Volkswagen Golf (CD) (Mk8).\u003c\/p\u003e\u003ch3\u003eAbout the KW V3 Leveling\u003c\/h3\u003e\u003cp\u003eKW V3 Leveling is a V3 coilover with self levelling for the rear axle, built for cars that carry or tow weight and would otherwise sit down at the back. The system keeps the ride height where it was set regardless of what is loaded.\u003c\/p\u003e\u003cp\u003eRebound and compression stay independently adjustable, as on the standard V3.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eRebound and compression adjustable separately\u003c\/li\u003e\n\u003cli\u003eSelf levelling rear axle\u003c\/li\u003e\n\u003cli\u003eIncludes the deactivation kit for the factory electronic dampers\u003c\/li\u003e\n\u003cli\u003eThis part number suits: Deactivation kit included\u003c\/li\u003e\n\u003cli\u003eSuits engines: 2.0 GTI, 2.0 GTI Clubsport, 2.0 GTI Clubsport S, 2.0 GTI TCR, 1.0 eTSI, 1.0 TSI, 1.4 TSI, 1.5 eTSI, 1.5 TSI, 2.0 TDI, 2.0 TDI GTD, 2.0 TSI\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Volkswagen Golf (CD) (Mk8)\u003c\/li\u003e\n\u003cli\u003eDampers are adjusted by easily operating adjustment wheels. Rebound is only adjustable if the top of the piston rod is accessible. This will depend on the vehicle construction.\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eElectronic damping control has to be deactivated. Deactivation kit is included in the delivery.\u003c\/li\u003e\n\u003cli\u003eOnly for cars with a clamp diameter of 55mm on the front axle\u003c\/li\u003e\n\u003cli\u003ePart number 352088000R\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eVolkswagen Golf, 2021 to current\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSeveral part numbers cover this vehicle. Check the specification against your car before ordering, or ask us.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841888047183,"sku":"352088000R","price":4587.55,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0012559.jpg?v=1789945898"},{"product_id":"eventuri-mk8-golf-r-gti-clubsport-mk4-leon-2020-cupra-formentor-2-0-vz2-carbon-intake-eve-ea8884-r-int","title":"Eventuri Intake System - Mk8 Golf R \/ Gti Clubsport \/ MK4 Leon \/ 2020+ Cupra Formentor 2.0 VZ2 (Carbon)","description":"\u003cp\u003eEventuri Intake System for the Mk8 Golf R \/ Gti Clubsport \/ MK4 Leon \/ 2020+ Cupra Formentor 2.0 VZ2, carbon.\u003c\/p\u003e\u003ch3\u003eAbout Eventuri intake systems\u003c\/h3\u003e\u003cp\u003eEventuri build intake systems around the Venturi principle: the filter sits in a carbon housing that narrows smoothly into the intake tube, so the air accelerates without hitting a step, a corner or a rubber join. That smoothness is what separates their systems from a cone filter on a pipe.\u003c\/p\u003e\u003cp\u003eThe housings are pre-preg carbon, which insulates the intake air from engine bay heat, and the systems are sealed and fed by ducts or a scoop so the engine draws cool air rather than hot air off the radiator.\u003c\/p\u003e\u003cp\u003eFitment: MK8 Golf R, Gti (2 Separate Part Numbers), Other 2.0 TFSi Gen 4 platforms\u003c\/p\u003e\u003cp\u003eThe MK8 Golf GTi\/R intake is a complete redesign of the stock intake all the way to the turbo inlet. Taking cues from our RS3 intake, we have maximised usage of the available space to create an intake which can cater for all power levels from stock to high power builds with hybrid or full frame turbos. This intake system has been developed to offer the highest possible flow rate whilst maintaining the lowest intake temperatures possible. Each component has been designed to provide the turbo with a smooth and free flowing path. The restrictive stock 73mm diameter inlet tube is replaced with a larger 94mm diameter tube intake tube. The filter itself has an outer diameter of 192mm or 7.5\" with a filtration surface area of over 110,000mm^2. The patented Venturi housing has been designed to provide the maximum internal volume possible for the Golf engine bay space available and provides laminar flow to the turbo tube. Finally the duct seals the filter opening to the front slam panel but is not restricted by just the stock entry feed. We have lifted the front of the duct to now provide an extra opening behind the hood which is equivalent to an extra 7\" diameter hole for the intake to draw from. The resulting system can significantly outflow the stock airbox while keeping intake temperatures at a minimum with the sealed design.\u003c\/p\u003e\u003cp\u003eThe Eventuri Difference\u003c\/p\u003e\u003cp\u003eThe 2.0 TFSi Generation 4 Eventuri system uses our Patented Carbon fiber Housings which provide an aerodynamically efficient airflow path from the filter to the turbo tubing. Not just another cone filter with a heat shield but a unique design which invokes the Venturi affect.\u003c\/p\u003e\u003cp\u003eOur MK8 Golf Intake has been independently tested by a reputable tuner in the UK, Regal Autosport. They tested a MK8 Golf R in stock form and also with a Tuning Box. Tests were done on the same day back to back with the stock airbox tested first and then the Eventuri fitted. No other changes were made to the car. The first graph shows the results using a stock map. As can be seen, there is a measurable gain throughout the RPM range of up to 12hp. This gain even on a stock car is noticeable on the road with better throttle response and quicker acceleration. The second graph shows results when using a tuning box which increases the flow demand from the intake system. The tuning box was used for both the stock airbox and the Eventuri intake without any changes between the tests. With a higher flow demand, the stock airbox presents a higher restriction to the turbo as can be seen by the significant gain achieved with the Eventuri fitted. We now have higher gains across the RPM range of up to 20hp and 30Nm, which is even more noticeable on the road. We expect gains to be even higher with higher states of tune.\u003c\/p\u003e\u003cp\u003eFlow Bench Testing\u003c\/p\u003e\u003cp\u003eWe conducted flow rate tests using a Superflow SF-1020 to measure the maximum flow rate possible at a pressure drop of 28\" H2O. Tests were done on the same day in controlled conditions using the same test jig for each system. We tested our full intake system against the stock airbox system for both the R and GTi variants. The results show an increase of maximum flow by an additional 72% for the Golf R system and an additional 42% for the GTi system. Importantly this has been achieved with a sealed intake system so the intake temperatures will also be maintained at a minimum.\u003c\/p\u003e\u003cp\u003eThe gains are from a combination of reasons:\u003c\/p\u003e\u003cp\u003e1) The sealed system keeps IATs low - the Golf engine bay can get heat soaked very quickly so an open cone filter will cause an increase in IAT values resulting in a loss of performance.\u003c\/p\u003e\u003cp\u003e2) The Venturi housing provides a smooth transition from the filter to the intake tubes which are both matched to an internal diameter of 94mm. This helps the turbo to run more efficiently.\u003c\/p\u003e\u003cp\u003e3) The entire system is constructed from pure pre-preg carbon fibre which is great at insulating from heat and has smooth internal surfaces as opposed to fibreglass which will have sharp resin lines present.\u003c\/p\u003e\u003cp\u003eThe image above shows the components for the Golf R system. The GTi has a different silicon hose.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFinish and options: carbon\u003c\/li\u003e\n\u003cli\u003ePre-preg carbon fibre construction\u003c\/li\u003e\n\u003cli\u003eSealed housing with a bespoke high flow filter\u003c\/li\u003e\n\u003cli\u003eAlso available as EVE-EA8884-GTI-INT: VW MK8 Golf GTi Carbon Intake\u003c\/li\u003e\n\u003cli\u003eAlso available as EVE-EA8884-USGTI-INT: VW MK8 Golf GTi (USA Fitment) Carbon Intake\u003c\/li\u003e\n\u003cli\u003eListed by Eventuri for: Volkswagen Golf (CD) (Mk8) Hatchback GTI 2021-current\u003c\/li\u003e\n\u003cli\u003ePart number EVE-EA8884-R-INT\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eVolkswagen Golf, 2021 to current\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCarbon Fiber Patented Venturi Filter Housing with 94mm Outlet\u003c\/li\u003e\n\u003cli\u003eBespoke High Flow Dry Cone Filter\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber Inlet Duct - Full Width\u003c\/li\u003e\n\u003cli\u003eSilicon tube with 94mm inlet diameter\u003c\/li\u003e\n\u003cli\u003eMachined breather adapter (Golf R only)\u003c\/li\u003e\n\u003cli\u003eSecondary Breather Filter and Bracket (USA spec Golf GTi)\u003c\/li\u003e\n\u003cli\u003eLaser Cut Stainless Steel Brackets\u003c\/li\u003e\n\u003cli\u003ePATENTED TECHNOLOGY\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Eventuri warranty applies.\u003c\/p\u003e","brand":"Eventuri","offers":[{"title":"Default Title","offer_id":46846349869135,"sku":"EVE-EA8884-R-INT","price":3079.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/EVE-0012949.jpg?v=1789958559"},{"product_id":"eventuri-mk8-golf-gti-mk4-leon-cupra-formentor-2-0-vz1-carbon-intake-eve-ea8884-gti-int","title":"Eventuri Intake System - Mk8 Golf Gti \/ MK4 Leon \/ Cupra Formentor 2.0 VZ1 (Carbon)","description":"\u003cp\u003eEventuri Intake System for the Mk8 Golf Gti \/ MK4 Leon \/ Cupra Formentor 2.0 VZ1, carbon.\u003c\/p\u003e\u003ch3\u003eAbout Eventuri intake systems\u003c\/h3\u003e\u003cp\u003eEventuri build intake systems around the Venturi principle: the filter sits in a carbon housing that narrows smoothly into the intake tube, so the air accelerates without hitting a step, a corner or a rubber join. That smoothness is what separates their systems from a cone filter on a pipe.\u003c\/p\u003e\u003cp\u003eThe housings are pre-preg carbon, which insulates the intake air from engine bay heat, and the systems are sealed and fed by ducts or a scoop so the engine draws cool air rather than hot air off the radiator.\u003c\/p\u003e\u003cp\u003eFitment: MK8 Golf R, Gti (2 Separate Part Numbers), Other 2.0 TFSi Gen 4 platforms\u003c\/p\u003e\u003cp\u003eThe MK8 Golf GTi\/R intake is a complete redesign of the stock intake all the way to the turbo inlet. Taking cues from our RS3 intake, we have maximised usage of the available space to create an intake which can cater for all power levels from stock to high power builds with hybrid or full frame turbos. This intake system has been developed to offer the highest possible flow rate whilst maintaining the lowest intake temperatures possible. Each component has been designed to provide the turbo with a smooth and free flowing path. The restrictive stock 73mm diameter inlet tube is replaced with a larger 94mm diameter tube intake tube. The filter itself has an outer diameter of 192mm or 7.5\" with a filtration surface area of over 110,000mm^2. The patented Venturi housing has been designed to provide the maximum internal volume possible for the Golf engine bay space available and provides laminar flow to the turbo tube. Finally the duct seals the filter opening to the front slam panel but is not restricted by just the stock entry feed. We have lifted the front of the duct to now provide an extra opening behind the hood which is equivalent to an extra 7\" diameter hole for the intake to draw from. The resulting system can significantly outflow the stock airbox while keeping intake temperatures at a minimum with the sealed design.\u003c\/p\u003e\u003cp\u003eThe Eventuri Difference\u003c\/p\u003e\u003cp\u003eThe 2.0 TFSi Generation 4 Eventuri system uses our Patented Carbon fiber Housings which provide an aerodynamically efficient airflow path from the filter to the turbo tubing. Not just another cone filter with a heat shield but a unique design which invokes the Venturi affect.\u003c\/p\u003e\u003cp\u003eOur MK8 Golf Intake has been independently tested by a reputable tuner in the UK, Regal Autosport. They tested a MK8 Golf R in stock form and also with a Tuning Box. Tests were done on the same day back to back with the stock airbox tested first and then the Eventuri fitted. No other changes were made to the car. The first graph shows the results using a stock map. As can be seen, there is a measurable gain throughout the RPM range of up to 12hp. This gain even on a stock car is noticeable on the road with better throttle response and quicker acceleration. The second graph shows results when using a tuning box which increases the flow demand from the intake system. The tuning box was used for both the stock airbox and the Eventuri intake without any changes between the tests. With a higher flow demand, the stock airbox presents a higher restriction to the turbo as can be seen by the significant gain achieved with the Eventuri fitted. We now have higher gains across the RPM range of up to 20hp and 30Nm, which is even more noticeable on the road. We expect gains to be even higher with higher states of tune.\u003c\/p\u003e\u003cp\u003eFlow Bench Testing\u003c\/p\u003e\u003cp\u003eWe conducted flow rate tests using a Superflow SF-1020 to measure the maximum flow rate possible at a pressure drop of 28\" H2O. Tests were done on the same day in controlled conditions using the same test jig for each system. We tested our full intake system against the stock airbox system for both the R and GTi variants. The results show an increase of maximum flow by an additional 72% for the Golf R system and an additional 42% for the GTi system. Importantly this has been achieved with a sealed intake system so the intake temperatures will also be maintained at a minimum.\u003c\/p\u003e\u003cp\u003eThe gains are from a combination of reasons:\u003c\/p\u003e\u003cp\u003e1) The sealed system keeps IATs low - the Golf engine bay can get heat soaked very quickly so an open cone filter will cause an increase in IAT values resulting in a loss of performance.\u003c\/p\u003e\u003cp\u003e2) The Venturi housing provides a smooth transition from the filter to the intake tubes which are both matched to an internal diameter of 94mm. This helps the turbo to run more efficiently.\u003c\/p\u003e\u003cp\u003e3) The entire system is constructed from pure pre-preg carbon fibre which is great at insulating from heat and has smooth internal surfaces as opposed to fibreglass which will have sharp resin lines present.\u003c\/p\u003e\u003cp\u003eThe image above shows the components for the Golf R system. The GTi has a different silicon hose.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFinish and options: carbon\u003c\/li\u003e\n\u003cli\u003ePre-preg carbon fibre construction\u003c\/li\u003e\n\u003cli\u003eSealed housing with a bespoke high flow filter\u003c\/li\u003e\n\u003cli\u003eAlso available as EVE-EA8884-R-INT: VW MK8 Golf R Carbon Intake\u003c\/li\u003e\n\u003cli\u003eAlso available as EVE-EA8884-USGTI-INT: VW MK8 Golf GTi (USA Fitment) Carbon Intake\u003c\/li\u003e\n\u003cli\u003eListed by Eventuri for: Volkswagen Golf (CD) (Mk8) Hatchback GTI 2021-current\u003c\/li\u003e\n\u003cli\u003ePart number EVE-EA8884-GTI-INT\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eVolkswagen Golf, 2021 to current\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCarbon Fiber Patented Venturi Filter Housing with 94mm Outlet\u003c\/li\u003e\n\u003cli\u003eBespoke High Flow Dry Cone Filter\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber Inlet Duct - Full Width\u003c\/li\u003e\n\u003cli\u003eSilicon tube with 94mm inlet diameter\u003c\/li\u003e\n\u003cli\u003eMachined breather adapter (Golf R only)\u003c\/li\u003e\n\u003cli\u003eSecondary Breather Filter and Bracket (USA spec Golf GTi)\u003c\/li\u003e\n\u003cli\u003eLaser Cut Stainless Steel Brackets\u003c\/li\u003e\n\u003cli\u003ePATENTED TECHNOLOGY\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Eventuri warranty applies.\u003c\/p\u003e","brand":"Eventuri","offers":[{"title":"Default Title","offer_id":46846349934671,"sku":"EVE-EA8884-GTI-INT","price":3079.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/EVE-0012950.jpg?v=1789958560"},{"product_id":"eventuri-golf-mk8-engine-cover-eve-ea8884-cf-eng","title":"Eventuri Golf MK8 Engine Cover","description":"\u003cp\u003eEventuri Golf MK8 Engine Cover.\u003c\/p\u003e\u003ch3\u003eAbout Eventuri engine covers\u003c\/h3\u003e\u003cp\u003eAn Eventuri carbon engine cover replaces the moulded plastic cover with pre-preg carbon fibre, finished to match their intake systems so the bay reads as one piece of work rather than a part bolted onto a standard engine.\u003c\/p\u003e\u003cp\u003eThe photos also show our intake system available separately.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePre-preg carbon fibre\u003c\/li\u003e\n\u003cli\u003eListed by Eventuri for: Volkswagen Golf (CD) (Mk8) Hatchback GTI 2021-current; Volkswagen Golf (CD) (Mk8) Hatchback Life 2021-current; Volkswagen Golf (CD) (Mk8) Hatchback R-Line 2021-current; Volkswagen Golf (CD) (Mk8) Hatchback Style 2021-current\u003c\/li\u003e\n\u003cli\u003ePart number EVE-EA8884-CF-ENG\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eVolkswagen Golf, 2021 to current\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne golf mk8 engine cover.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Eventuri warranty applies.\u003c\/p\u003e","brand":"Eventuri","offers":[{"title":"Default Title","offer_id":46846350327887,"sku":"EVE-EA8884-CF-ENG","price":1389.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/EVE-0013086.jpg?v=1789958561"},{"product_id":"a1-171-girodisc-vw-golf-r-mk7-audi-tt-s-and-s3-front-rotors","title":"Girodisc VW Golf R (Mk7), Audi TT S \u0026 S3 Front Rotors","description":"\u003cp\u003eThe Girodisc system is a direct replacement for the OE disc, no modifications are necessary. The disc will bolt directly to the car and work with OE calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Girodisc front rotors are approx 20.3lbs vs. 23.8lbs for the stock units. This reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.\u003cbr\u003e\n\u003cbr\u003e\nThe central hat section of our rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum.  The disc is made from our own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc.  The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.\u003cbr\u003e\n\u003cbr\u003e\nThe rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, manufactured by Girodisc in the USA to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The pins are secured by class 12.9 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads.\u003cbr\u003e\n\u003cbr\u003e\nOnce the Girodisc system is in place, simply replace the cast iron rotor when needed.\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan style=\"font-size: 14pt;\"\u003eSold\/priced per pair\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAudi A3 (8V) Hatchback S3 2015-2020\u003cbr\u003eAudi A3 (8V) Sedan S3 2015-2020\u003cbr\u003eAudi TT (FV) Coupe TTS 2015-2023\u003cbr\u003eAudi TT (FV) Roadster TTS 2015-2023\u003cbr\u003eVolkswagen Golf (5G) Hatchback R 2015-2020\u003cbr\u003eVolkswagen Golf (CD) (Mk8) Hatchback GTI 2021-current\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer fitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAudi S3 S3 (8V, 2017-20) - Front\u003cbr\u003eAudi TT S TT S (8S, 2016-23) - Front\u003cbr\u003eVolkswagen GTI (Mk7) w\/ Performance Package - Front\u003cbr\u003eVolkswagen GTI (Mk8) All - Front\u003cbr\u003eVolkswagen Golf R (Mk7) All - Front\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA1-171\u003c\/p\u003e\u003cp\u003e\u003cem\u003eProfessional fitting is recommended.\u003c\/em\u003e\u003c\/p\u003e","brand":"Girodisc","offers":[{"title":"Default Title","offer_id":46874505019471,"sku":"A1-171","price":2269.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/GIR-0006072.jpg?v=1790056463"},{"product_id":"a2-179-girodisc-vw-audi-mqb-rear-rotors","title":"Girodisc VW, Audi MQB Rear Rotors","description":"\u003cp\u003e\u003cstrong\u003eBrake type:\u003c\/strong\u003e fits cars with standard iron brakes (without carbon ceramic brakes). Please check your car before ordering, or send us your VIN.\u003c\/p\u003e\u003cp\u003eThe Girodisc system is a direct replacement for the OE disc, no modifications are necessary. The disc will bolt directly to the car and work with OE calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Girodisc rear rotors are approx 12.9lbs vs. 15lbs for the stock units, this reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.\u003cbr\u003e\u003cbr\u003eThe central hat section of our rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum.  The disc is made from our own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc.  The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.\u003cbr\u003e\u003cbr\u003eThe rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, manufactured by Girodisc in the USA to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The pins are secured by class 12.9 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads.\u003cbr\u003e\u003cbr\u003eOnce the Girodisc system is in place, simply replace the cast iron rotor when needed. \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: 14pt;\"\u003eSold\/priced per pair\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAudi A3 (8P) Hatchback RS 3 2011-2013\u003cbr\u003eAudi A3 (8V) Hatchback RS 3 2015-2020\u003cbr\u003eAudi A3 (8V) Hatchback S3 2015-2020\u003cbr\u003eAudi A3 (8V) Sedan RS 3 2017-2020\u003cbr\u003eAudi A3 (8V) Sedan S3 2015-2020\u003cbr\u003eAudi A3 (8Y) Hatchback RS 3 2021-current\u003cbr\u003eAudi A3 (8Y) Sedan RS 3 2021-current\u003cbr\u003eAudi TT (FV) Coupe TT RS 2016-2023\u003cbr\u003eAudi TT (FV) Coupe TTS 2015-2023\u003cbr\u003eAudi TT (FV) Roadster TT RS 2016-2023\u003cbr\u003eAudi TT (FV) Roadster TTS 2015-2023\u003cbr\u003eVolkswagen Golf (5G) Hatchback R 2015-2020\u003cbr\u003eVolkswagen Golf (CD) (Mk8) Hatchback GTI 2021-current\u003cbr\u003eVolkswagen Golf (CD) Hatchback R 2022-current\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer fitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAudi RS3 RS3 (8Y, 2022-) (With carbon ceramic front) - Rear\u003cbr\u003eAudi RS3 RS3 (8Y, 2022-) (Without carbon ceramic) - Rear\u003cbr\u003eAudi RS3 RS3 Sedan (8V, 2017-20) - Rear\u003cbr\u003eAudi RS3 RS3 Sportback (8P, 2011-12) - Rear\u003cbr\u003eAudi RS3 RS3 Sportback (8V, 2015-20) - Rear\u003cbr\u003eAudi S3 S3 (8V, 2017-20) - Rear\u003cbr\u003eAudi TT RS TT RS (8S, 2017-22) - Rear\u003cbr\u003eAudi TT S TT S (8S, 2016-23) - Rear\u003cbr\u003eVolkswagen GTI (Mk7) w\/ Performance Package - Rear\u003cbr\u003eVolkswagen GTI (Mk8) All - Rear\u003cbr\u003eVolkswagen Golf R (Mk7) All - Rear\u003cbr\u003eVolkswagen Golf R (Mk8) All - Rear\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA2-179\u003c\/p\u003e\u003cp\u003e\u003cem\u003eProfessional fitting is recommended.\u003c\/em\u003e\u003c\/p\u003e","brand":"Girodisc","offers":[{"title":"Default Title","offer_id":46874509148239,"sku":"A2-179","price":2169.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/GIR-0006191.jpg?v=1790056486"},{"product_id":"d1-171-girodisc-front-rotor-ring-replacements-for-golf-r","title":"Girodisc Front Rotor Ring Replacements for Golf R","description":"\u003cp\u003eOur replacement rings are \u003cstrong\u003esold in pairs\u003c\/strong\u003e and include replacement hardware. The only parts you will reuse are your existing GiroDisc hats.\u003c\/p\u003e\u003cp\u003ePlease note that unless specifically noted, GiroDisc replacement rings are \u003cstrong\u003eonly designed to work with GiroDisc hats\u003c\/strong\u003e. They are not designed to be used with other brands, including hats from cars equipped with 2-piece rotors from the factory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAudi A3 (8V) Hatchback S3 2015-2020\u003cbr\u003eAudi A3 (8V) Sedan S3 2015-2020\u003cbr\u003eAudi TT (FV) Coupe TTS 2015-2023\u003cbr\u003eAudi TT (FV) Roadster TTS 2015-2023\u003cbr\u003eVolkswagen Golf (5G) Hatchback R 2015-2020\u003cbr\u003eVolkswagen Golf (CD) (Mk8) Hatchback GTI 2021-current\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer fitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAudi S3 S3 (8V, 2017-20) - Front\u003cbr\u003eAudi TT S TT S (8S, 2016-23) - Front\u003cbr\u003eVolkswagen GTI (Mk7) w\/ Performance Package - Front\u003cbr\u003eVolkswagen GTI (Mk8) All - Front\u003cbr\u003eVolkswagen Golf R (Mk7) All - Front\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eD1-171\u003c\/p\u003e\u003cp\u003e\u003cem\u003eProfessional fitting is recommended.\u003c\/em\u003e\u003c\/p\u003e","brand":"Girodisc","offers":[{"title":"Default Title","offer_id":46874514718799,"sku":"D1-171","price":1139.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/GIR-0007979.jpg?v=1790056521"},{"product_id":"d2-171-girodisc-volkswagon-golf-slotted-rear-rotor","title":"Girodisc Volkswagon Golf Slotted Rear Rotor","description":"\u003cp\u003e\u003cstrong\u003eBrake type:\u003c\/strong\u003e fits cars with standard iron brakes (without carbon ceramic brakes). Please check your car before ordering, or send us your VIN.\u003c\/p\u003e\u003cp\u003eOur replacement rings are \u003cstrong\u003esold in pairs\u003c\/strong\u003e and include replacement hardware. The only parts you will reuse are your existing GiroDisc hats.\u003c\/p\u003e\u003cp\u003ePlease note that unless specifically noted, GiroDisc replacement rings are \u003cstrong\u003eonly designed to work with GiroDisc hats\u003c\/strong\u003e. They are not designed to be used with other brands, including hats from cars equipped with 2-piece rotors from the factory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAudi A3 (8P) Hatchback RS 3 2011-2013\u003cbr\u003eAudi A3 (8V) Hatchback RS 3 2015-2020\u003cbr\u003eAudi A3 (8V) Hatchback S3 2015-2020\u003cbr\u003eAudi A3 (8V) Sedan RS 3 2017-2020\u003cbr\u003eAudi A3 (8V) Sedan S3 2015-2020\u003cbr\u003eAudi A3 (8Y) Hatchback RS 3 2021-current\u003cbr\u003eAudi A3 (8Y) Sedan RS 3 2021-current\u003cbr\u003eAudi TT (8J) Coupe TT RS 2009-2014\u003cbr\u003eAudi TT (8J) Roadster TT RS Roadster 2009-2014\u003cbr\u003eAudi TT (FV) Coupe TT RS 2016-2023\u003cbr\u003eAudi TT (FV) Coupe TTS 2015-2023\u003cbr\u003eAudi TT (FV) Roadster TT RS 2016-2023\u003cbr\u003eAudi TT (FV) Roadster TTS 2015-2023\u003cbr\u003eVolkswagen Golf (5G) Hatchback R 2015-2020\u003cbr\u003eVolkswagen Golf (CD) (Mk8) Hatchback GTI 2021-current\u003cbr\u003eVolkswagen Golf (CD) Hatchback R 2022-current\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer fitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAudi RS3 RS3 (8Y, 2022-) (With carbon ceramic front) - Rear\u003cbr\u003eAudi RS3 RS3 (8Y, 2022-) (Without carbon ceramic) - Rear\u003cbr\u003eAudi RS3 RS3 Sedan (8V, 2017-20) - Rear\u003cbr\u003eAudi RS3 RS3 Sportback (8P, 2011-12) - Rear\u003cbr\u003eAudi RS3 RS3 Sportback (8V, 2015-20) - Rear\u003cbr\u003eAudi S3 S3 (8V, 2017-20) - Rear\u003cbr\u003eAudi TT RS TT RS (8J, 2010-13) - Rear\u003cbr\u003eAudi TT RS TT RS (8S, 2017-22) - Rear\u003cbr\u003eAudi TT S TT S (8S, 2016-23) - Rear\u003cbr\u003eVolkswagen GTI (Mk7) w\/ Performance Package - Rear\u003cbr\u003eVolkswagen GTI (Mk8) All - Rear\u003cbr\u003eVolkswagen Golf R (Mk7) All - Rear\u003cbr\u003eVolkswagen Golf R (Mk8) All - Rear\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eD2-171\u003c\/p\u003e\u003cp\u003e\u003cem\u003eProfessional fitting is recommended.\u003c\/em\u003e\u003c\/p\u003e","brand":"Girodisc","offers":[{"title":"Default Title","offer_id":46874517798991,"sku":"D2-171","price":1039.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/GIR-0008051.jpg?v=1790056542"},{"product_id":"es-1314738-dixcel-brake-pads-vw-golf-gti-mk7-mk8-golf-r-mk7-audi-s3-8v-front","title":"Dixcel Type ES Brake Pads - VW Golf GTI Mk7, Mk8\/Golf R Mk7\/Audi S3 8V (Front)","description":"\u003cp\u003eDixcel Type ES Brake Pads for the VW Golf GTI Mk7, Mk8\/Golf R Mk7\/Audi S3 8V (Front).\u003c\/p\u003e\u003ch3\u003eAbout Dixcel Type ES\u003c\/h3\u003e\u003cp\u003eType ES is Dixcel's street pad, built for a car that is driven on the road rather than the track. The friction material is organic, which keeps the rotor face kind and the noise down, and it bites cleanly from cold, which is what matters on the first stop of the morning.\u003c\/p\u003e\u003cp\u003eFade resistance is well ahead of a worn factory pad without asking for heat before it works. Where the car came with wear sensors and shims, they are supplied fitted.\u003c\/p\u003e\u003cp\u003eAffordable Street performance pads\u003c\/p\u003e\u003cp\u003eUltra low dust brake pads for street use\u003c\/p\u003e\u003cp\u003ePlease take a look at the comparison images of the two wheels. Clearly, the car using the M type has little brake dust on the wheel. The benefit of the M type is not just being freed from constant cleaning of the wheels. Most brake dust is not from brake pad shavings, but shavings from the brake disc. The M type brake pads have low brake dust, meaning the pads are shaving off less from the brake disc. This leads to the prolonging of the life of the brake Rotors. The characteristic of metal shavings?dust? is its vulnerability to humidity; humidity corrodes the metal shavings. So without the proper maintenance, the metal shavings can cause the wheels to corrode. With the M type brake pads with\/Minimal brake dust, there is no need for the frequent cleaning of wheels. Please experience for yourself the superior brake performance that the OEM pads lack with the ultra low brake dust M type brake pads.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHigh fade resistance for stable braking performance.\u003c\/li\u003e\n\u003cli\u003eHigh level of brake control.\u003c\/li\u003e\n\u003cli\u003eScorched friction surface for an improved bedding-in process.\u003c\/li\u003e\n\u003cli\u003ePre-installed mechanical brake pad sensors and stop noise shim. (On models originally equipped with sensors)\u003c\/li\u003e\n\u003cli\u003eCan be used with any type of DIXCEL brake disc range.\u003c\/li\u003e\n\u003cli\u003eSignificant reduction of brake dust without sacrificing brake performance!\u003c\/li\u003e\n\u003cli\u003eStable operating friction level for superior brake control.\u003c\/li\u003e\n\u003cli\u003eBraking power that is NOT abrupt; Smooth braking for a comfortable ride during braking.\u003c\/li\u003e\n\u003cli\u003eDesigned to\/Minimize disc wear to help prolong the life of the brake Rotors.\u003c\/li\u003e\n\u003cli\u003eThe repeated braking tests from 180km\/h were done on a race circuit.\u003c\/li\u003e\n\u003cli\u003eThe M type is NOT designed for circuit-use. Use on race circuits can result in increased wear and decrease in performance.\u003c\/li\u003e\n\u003cli\u003eThe Z and R series brake pads are recommended for circuit-use brake pads.\u003c\/li\u003e\n\u003cli\u003eA multi-use brake pad; designed for street-use to circuit-use.\u003c\/li\u003e\n\u003cli\u003eOptimal cold friction braking; a necessity for street-use high performance brake pads.\u003c\/li\u003e\n\u003cli\u003eHigh fade resistance allows for stable braking under high brake temperatures during circuit use.\u003c\/li\u003e\n\u003cli\u003eThe perfect brake pads for use with high performance radial tires.\u003c\/li\u003e\n\u003cli\u003eFriction Materials: Non asbestos organic\u003c\/li\u003e\n\u003cli\u003eEffective Temperature Range: 0 - 600 c\u003c\/li\u003e\n\u003cli\u003eFriction coefficient (fade test): Max. μ:0.48\/Ave. μ:0.35\/Min. μ:0.34\u003c\/li\u003e\n\u003cli\u003eFriction Materials: Non asbestos organic etc [Copper Free 2021 regulations]\u003c\/li\u003e\n\u003cli\u003eEffective Temperature Range: 0 - 500 c\u003c\/li\u003e\n\u003cli\u003eFriction coefficient (fade test): Max. μ:0.52\/Ave. μ:0.40\/Min. μ:0.39\u003c\/li\u003e\n\u003cli\u003eFriction Materials: Graphite metallic\u003c\/li\u003e\n\u003cli\u003eEffective Temperature Range: 0 - 850 °C\u003c\/li\u003e\n\u003cli\u003eFriction coefficient (fade test): Max. μ:0.67\/Ave. μ:0.57\/Min. μ:0.50\u003c\/li\u003e\n\u003cli\u003eListed by Dixcel for: AUDI S3\u003c\/li\u003e\n\u003cli\u003eOffered in 3 versions, listed as options on this page\u003c\/li\u003e\n\u003cli\u003ePart number ES-1314738\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAudi A3, 2015 to 2020\u003c\/li\u003e\n\u003cli\u003eVolkswagen Golf, 2015 to current\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA set of brake pads for one axle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Dixcel warranty applies.\u003c\/p\u003e","brand":"Dixcel","offers":[{"title":"Type ES","offer_id":46874622656591,"sku":"ES-1314738","price":255.0,"currency_code":"AUD","in_stock":true},{"title":"Type M","offer_id":46874622689359,"sku":"M-1314738","price":340.0,"currency_code":"AUD","in_stock":true},{"title":"Type Z","offer_id":46874622722127,"sku":"Z-1314738","price":375.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/DIX-0025119.jpg?v=1790059607"},{"product_id":"sd1314709s-dixcel-brake-discs-audi-s3-8v-vw-golf-r-mk7-gti-mk8-front-340-x-30mm","title":"Dixcel Type SD Brake Discs - Audi S3 8V\/VW Golf R Mk7\/GTI Mk8 (Front, 340 x 30mm)","description":"\u003cp\u003eDixcel Type SD Brake Discs for the Audi S3 8V\/VW Golf R Mk7\/GTI Mk8 (Front, 340 x 30mm).\u003c\/p\u003e\u003ch3\u003eAbout Dixcel Type SD\u003c\/h3\u003e\u003cp\u003eType SD rotors are slotted, with six curved slots that sweep across the pad face to clear gas and debris and to keep the friction surface clean. Dixcel quote a marked increase in braking power over a plain rotor.\u003c\/p\u003e\u003cp\u003eThey suit a street car driven hard, where a plain rotor glazes and loses feel.\u003c\/p\u003e\u003cp\u003e20% MORE brake power! The DIXCEL SD series Rotors are for the users who want more braking power and better disc appearance when compared to their standard disc.\u003c\/p\u003e\u003cp\u003e12 slot version is available upon request as an option. Ask us for pricing on the 12 slot version. Because this is a custom-order product, orders cannot be canceled after they are placed.\u003c\/p\u003e\u003cp\u003eThe recommended slot direction is Reverse rotation for 6 slots and Normal rotation for 12 slots.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSlots increase brake performance by up to 20% according to simulated testing.\u003c\/li\u003e\n\u003cli\u003e6 slots is the standard for SD brake Rotors. The 6 slot pattern was selected after careful ex\/Mination of factors such as pad wear,\u003c\/li\u003e\n\u003cli\u003enoise level, and gas ventilation.\u003c\/li\u003e\n\u003cli\u003eFor the 6 slot brake Rotors, reverse rotation (slots pointing forward) is recommended for best brake performance.\u003c\/li\u003e\n\u003cli\u003eHigh carbon material is used for sports cars and vehicles with high brake loads to improve durability compared to conventional products.\u003c\/li\u003e\n\u003cli\u003eSlots are designed to rotate in a reverse direction to gain better \"shaving effect\".\u003c\/li\u003e\n\u003cli\u003eOffset slot pattern on outer\/inner side of brake Rotors reduces brake judder.\u003c\/li\u003e\n\u003cli\u003eSignificantly improved resistance to cracks and distortion with DIXCEL heat treatment process.\u003c\/li\u003e\n\u003cli\u003eThe Carbon content of the disc was increased by 20% compared to our standard mixture.\u003c\/li\u003e\n\u003cli\u003eStable durability even with repeated expansion and compression as a result of DIXCEL heat treatment process.\u003c\/li\u003e\n\u003cli\u003eSignificantly improved crack resistance and resistance to distortion\u003c\/li\u003e\n\u003cli\u003eFP Non-Slotted \/ FS Slotted\u003c\/li\u003e\n\u003cli\u003eL\/R set\u003c\/li\u003e\n\u003cli\u003eUse reverse rotation for one-piece Rotors, and use forward rotation for the special order 12 slot version. Use reverse rotation for ALL two-piece Rotors.\u003c\/li\u003e\n\u003cli\u003e12 slot version is available upon request as an option. Ask us for pricing on the 12 slot version. Because this is a custom-order product, orders cannot be canceled after they are placed.\u003c\/li\u003e\n\u003cli\u003eAnti-corrosion protection of the Rotors will not completely prevent corrosion from occurring. Since the Rotors are made of cast iron, it is impossible to completely prevent corrosion. Please be aware DIXCEL will not offer any exchanges\/refunds for\u003c\/li\u003e\n\u003cli\u003ecorrosion of Rotors. Sample photo, actual product may vary. Not all products have ventilation fins.\u003c\/li\u003e\n\u003cli\u003eSample photo, actual product may vary. Not all products have ventilation fins. Rotors are designed to the same specifications as the OEM product.\u003c\/li\u003e\n\u003cli\u003eThe highest grade brake disc by DIXCEL, made from our ever advancing technology and vast experience\u003c\/li\u003e\n\u003cli\u003eDIXCEL is an official brake pads and Rotors supplier to international formula series such as F3 Asia or F4 UAE.\u003c\/li\u003e\n\u003cli\u003eIn these series, all cars are equipped with DIXCEL FS Rotors and the young international drivers compete severely with each other relying on the performance of DIXCEL FS Rotors.\u003c\/li\u003e\n\u003cli\u003eThere is a particular manufacturing process and material selection process for brake Rotors, just as there is for brake pads.\u003c\/li\u003e\n\u003cli\u003eSince our establishment, DIXCEL has used our resources for the research \u0026amp; development of brake Rotors.\u003c\/li\u003e\n\u003cli\u003eFor example, the Super Taikyu racing series.\u003c\/li\u003e\n\u003cli\u003eThe Super Taikyu is an endurance race, which allows us to gather data from rigorous conditions of multiple hours and long distance of use.\u003c\/li\u003e\n\u003cli\u003eThe Super Taikyu racing series uses production-based cars. These cars are much heavier than the purpose-built race cars, which put more strain on the brakes.\u003c\/li\u003e\n\u003cli\u003eThe engineers are able to gather valuable data and experience from this series.\u003c\/li\u003e\n\u003cli\u003eThe FP\/FS was developed with the need to keep benefits of a high carbon disc, and also having great initial response without sacrificing other performance areas.\u003c\/li\u003e\n\u003cli\u003eThe unique know-how and thinking of DIXCEL is all packed into the FP\/FS.\u003c\/li\u003e\n\u003cli\u003e“The brake disc should also have the best brake performance”\u003c\/li\u003e\n\u003cli\u003eThe FP\/FS Rotors are both for professional users and for people who have high performance demands.\u003c\/li\u003e\n\u003cli\u003eThe FP\/FS is the pinnacle of DIXCEL current technology.\u003c\/li\u003e\n\u003cli\u003eThe application of FP\/FS and two-piece is continuously expanding. For the latest up-to-date information, we recommend checking our website.\u003c\/li\u003e\n\u003cli\u003eThe performance difference between forward and reverse rotations\u003c\/li\u003e\n\u003cli\u003eListed by Dixcel for: AUDI S3\u003c\/li\u003e\n\u003cli\u003eOffered in 2 versions, listed as options on this page\u003c\/li\u003e\n\u003cli\u003ePart number SD1314709S\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAudi A3, 2015 to 2020\u003c\/li\u003e\n\u003cli\u003eVolkswagen Golf, 2015 to current\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA left and right pair of rotors for one axle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Dixcel warranty applies.\u003c\/p\u003e","brand":"Dixcel","offers":[{"title":"Type SD","offer_id":46874623377487,"sku":"SD1314709S","price":875.0,"currency_code":"AUD","in_stock":true},{"title":"Type FS","offer_id":46874623410255,"sku":"FS1314709S","price":985.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/DIX-0025090.jpg?v=1790059609"},{"product_id":"sd1358331s-dixcel-brake-discs-audi-s3-8p-8v-vw-golf-r32-mk5-golf-gti-and-r-mk6-7-8-rear-310-x-22mm","title":"Dixcel Type SD Brake Discs - Audi S3 8P 8V\/VW Golf R32 Mk5\/Golf GTI \u0026 R Mk6,7,8 (Rear, 310 x 22mm)","description":"\u003cp\u003eDixcel Type SD Brake Discs for the Audi S3 8P 8V\/VW Golf R32 Mk5\/Golf GTI \u0026amp; R Mk6,7,8 (Rear, 310 x 22mm).\u003c\/p\u003e\u003ch3\u003eAbout Dixcel Type SD\u003c\/h3\u003e\u003cp\u003eType SD rotors are slotted, with six curved slots that sweep across the pad face to clear gas and debris and to keep the friction surface clean. Dixcel quote a marked increase in braking power over a plain rotor.\u003c\/p\u003e\u003cp\u003eThey suit a street car driven hard, where a plain rotor glazes and loses feel.\u003c\/p\u003e\u003cp\u003e20% MORE brake power! The DIXCEL SD series Rotors are for the users who want more braking power and better disc appearance when compared to their standard disc.\u003c\/p\u003e\u003cp\u003e12 slot version is available upon request as an option. Ask us for pricing on the 12 slot version. Because this is a custom-order product, orders cannot be canceled after they are placed.\u003c\/p\u003e\u003cp\u003eThe recommended slot direction is Reverse rotation for 6 slots and Normal rotation for 12 slots.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSlots increase brake performance by up to 20% according to simulated testing.\u003c\/li\u003e\n\u003cli\u003e6 slots is the standard for SD brake Rotors. The 6 slot pattern was selected after careful ex\/Mination of factors such as pad wear,\u003c\/li\u003e\n\u003cli\u003enoise level, and gas ventilation.\u003c\/li\u003e\n\u003cli\u003eFor the 6 slot brake Rotors, reverse rotation (slots pointing forward) is recommended for best brake performance.\u003c\/li\u003e\n\u003cli\u003eHigh carbon material is used for sports cars and vehicles with high brake loads to improve durability compared to conventional products.\u003c\/li\u003e\n\u003cli\u003eSlots are designed to rotate in a reverse direction to gain better \"shaving effect\".\u003c\/li\u003e\n\u003cli\u003eOffset slot pattern on outer\/inner side of brake Rotors reduces brake judder.\u003c\/li\u003e\n\u003cli\u003eSignificantly improved resistance to cracks and distortion with DIXCEL heat treatment process.\u003c\/li\u003e\n\u003cli\u003eThe Carbon content of the disc was increased by 20% compared to our standard mixture.\u003c\/li\u003e\n\u003cli\u003eStable durability even with repeated expansion and compression as a result of DIXCEL heat treatment process.\u003c\/li\u003e\n\u003cli\u003eSignificantly improved crack resistance and resistance to distortion\u003c\/li\u003e\n\u003cli\u003eFP Non-Slotted \/ FS Slotted\u003c\/li\u003e\n\u003cli\u003eL\/R set\u003c\/li\u003e\n\u003cli\u003eUse reverse rotation for one-piece Rotors, and use forward rotation for the special order 12 slot version. Use reverse rotation for ALL two-piece Rotors.\u003c\/li\u003e\n\u003cli\u003e12 slot version is available upon request as an option. Ask us for pricing on the 12 slot version. Because this is a custom-order product, orders cannot be canceled after they are placed.\u003c\/li\u003e\n\u003cli\u003eAnti-corrosion protection of the Rotors will not completely prevent corrosion from occurring. Since the Rotors are made of cast iron, it is impossible to completely prevent corrosion. Please be aware DIXCEL will not offer any exchanges\/refunds for\u003c\/li\u003e\n\u003cli\u003ecorrosion of Rotors. Sample photo, actual product may vary. Not all products have ventilation fins.\u003c\/li\u003e\n\u003cli\u003eSample photo, actual product may vary. Not all products have ventilation fins. Rotors are designed to the same specifications as the OEM product.\u003c\/li\u003e\n\u003cli\u003eThe highest grade brake disc by DIXCEL, made from our ever advancing technology and vast experience\u003c\/li\u003e\n\u003cli\u003eDIXCEL is an official brake pads and Rotors supplier to international formula series such as F3 Asia or F4 UAE.\u003c\/li\u003e\n\u003cli\u003eIn these series, all cars are equipped with DIXCEL FS Rotors and the young international drivers compete severely with each other relying on the performance of DIXCEL FS Rotors.\u003c\/li\u003e\n\u003cli\u003eThere is a particular manufacturing process and material selection process for brake Rotors, just as there is for brake pads.\u003c\/li\u003e\n\u003cli\u003eSince our establishment, DIXCEL has used our resources for the research \u0026amp; development of brake Rotors.\u003c\/li\u003e\n\u003cli\u003eFor example, the Super Taikyu racing series.\u003c\/li\u003e\n\u003cli\u003eThe Super Taikyu is an endurance race, which allows us to gather data from rigorous conditions of multiple hours and long distance of use.\u003c\/li\u003e\n\u003cli\u003eThe Super Taikyu racing series uses production-based cars. These cars are much heavier than the purpose-built race cars, which put more strain on the brakes.\u003c\/li\u003e\n\u003cli\u003eThe engineers are able to gather valuable data and experience from this series.\u003c\/li\u003e\n\u003cli\u003eThe FP\/FS was developed with the need to keep benefits of a high carbon disc, and also having great initial response without sacrificing other performance areas.\u003c\/li\u003e\n\u003cli\u003eThe unique know-how and thinking of DIXCEL is all packed into the FP\/FS.\u003c\/li\u003e\n\u003cli\u003e“The brake disc should also have the best brake performance”\u003c\/li\u003e\n\u003cli\u003eThe FP\/FS Rotors are both for professional users and for people who have high performance demands.\u003c\/li\u003e\n\u003cli\u003eThe FP\/FS is the pinnacle of DIXCEL current technology.\u003c\/li\u003e\n\u003cli\u003eThe application of FP\/FS and two-piece is continuously expanding. For the latest up-to-date information, we recommend checking our website.\u003c\/li\u003e\n\u003cli\u003eThe performance difference between forward and reverse rotations\u003c\/li\u003e\n\u003cli\u003eListed by Dixcel for: AUDI S3\u003c\/li\u003e\n\u003cli\u003eOffered in 2 versions, listed as options on this page\u003c\/li\u003e\n\u003cli\u003ePart number SD1358331S\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAudi A3, 2007 to 2020\u003c\/li\u003e\n\u003cli\u003eVolkswagen Golf, 2006 to current\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA left and right pair of rotors for one axle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Dixcel warranty applies.\u003c\/p\u003e","brand":"Dixcel","offers":[{"title":"Type SD","offer_id":46874624622671,"sku":"SD1358331S","price":540.0,"currency_code":"AUD","in_stock":true},{"title":"Type FS","offer_id":46874624655439,"sku":"FS1358331S","price":650.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/DIX-0025091.jpg?v=1790059612"},{"product_id":"132800ct-st-coilover-kit-x-vw-golf-viii-cd1-volkswagen-golf-cd","title":"ST Coilover Kit X VW Golf VIII (CD1) - Volkswagen Golf (CD)","description":"\u003cp\u003eST Coilover Kit X VW Golf VIII (CD1) for the Volkswagen Golf.\u003c\/p\u003e\u003ch3\u003eAbout the ST X coilovers\u003c\/h3\u003e\u003cp\u003eThe ST X is the entry coilover in the range, with height adjustment on a continuous thread and damping set at the factory. ST is part of KW Automotive and the kits are engineered alongside them, which is why a budget coilover still rides properly rather than just sitting low.\u003c\/p\u003e\u003cp\u003eStruts are galvanised and multiple sealed against corrosion, with twin-tube dampers and an adjustable spring plate. The lowering range depends on the car and is listed in the specification where ST state it.\u003c\/p\u003e\u003cp\u003eNeed to get low? ST coilovers feature a continuous thread construction for height adjustment from moderate to eXtreme! Each coilover is manufactured by KW Automotive and their expertise and know how ensures maximum quality and fantastic driving dynamics.\u003c\/p\u003e\u003cp\u003eOnce installed, the ST X coilover can be easily adjusted using a polyamide ring on the galvanized, multiple-sealed strut. Adjustment is different for each car, but typically you can expect between 35 and 65mm of lowering on both the front and rear axles. For lowered cars as standard (such as the BMW E9x 3-series) the ST X coilover features a range of 30 to 60mm (front axle) and 25-55mm (rear axle).\u003c\/p\u003e\u003cp\u003eDesigned in conjunction with KW Germany, ST X coilovers deliver a sporty handling by reducing the car’s bodyroll during compression as well as improving agility when driving fast. The high-quality production of each ST X coilover includes a low-friction and pressure resistant housing alongside a chrome-plated piston rod for maximum longevity. A mono block guide and ST seal package ensures the twin-tube dampers remain free of dirt particles in all weather conditions.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle thread adjustment (when possible)\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003ePowerful twin-tube dampers with high-quality components for maximum longevity\u003c\/li\u003e\n\u003cli\u003eSuits engines: 30 TDI, 35 TDI, 1.5 eTSI, 1.5 TSI, 2.0 TDI, 2.0 TSI, 2.0 GTI, 2.0 GTI Clubsport, 2.0 TDI GTD\u003c\/li\u003e\n\u003cli\u003eListed by ST for: Volkswagen Golf (CD) (Mk8) Hatchback GTI 2021-current\u003c\/li\u003e\n\u003cli\u003eAt vehicles equipped with electronic damping, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510342\u003c\/li\u003e\n\u003cli\u003eOnly for cars with a clamp diameter of 55 mm on the front axle\u003c\/li\u003e\n\u003cli\u003ePart number 132800CT\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eVolkswagen Golf, 2021 to current\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. ST Suspensions warranty applies.\u003c\/p\u003e","brand":"ST Suspensions","offers":[{"title":"Default Title","offer_id":46874679836751,"sku":"132800CT","price":1630.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/STS-0001615.jpg?v=1790059958"},{"product_id":"182800ct-st-coilover-xa-kit-volkswagen-golf-cd","title":"ST Coilover XA Kit - Volkswagen Golf (CD)","description":"\u003cp\u003eST Coilover XA Kit for the Volkswagen Golf.\u003c\/p\u003e\u003ch3\u003eAbout the ST XA coilovers\u003c\/h3\u003e\u003cp\u003eThe ST XA adds rebound adjustment to the height adjustable coilover, so the car can be firmed up for a back road or softened for a rough one without touching the ride height.\u003c\/p\u003e\u003cp\u003eConstruction is the same galvanised, multiple sealed strut as the X, with twin-tube dampers and an adjustable spring plate.\u003c\/p\u003e\u003cp\u003eFor drivers wanting more than just ride height adjustment comes the ST XA coilover. Developed alongside KW Automotive the ST XA allows individual adjustment of the damping to suit just about all your driving needs!\u003c\/p\u003e\u003cp\u003eST XA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. Any vehicle fitted with ST XA coilovers will act much more agile and sporty compared to standard.\u003c\/p\u003e\u003cp\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal damper adjustment\u003c\/li\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eSuits engines: 30 TDI, 35 TDI, 1.5 eTSI, 1.5 TSI, 2.0 TDI, 2.0 TSI, 2.0 GTI, 2.0 GTI Clubsport, 2.0 TDI GTD\u003c\/li\u003e\n\u003cli\u003eListed by ST for: Volkswagen Golf (CD) (Mk8) Hatchback GTI 2021-current\u003c\/li\u003e\n\u003cli\u003eAt vehicles equipped with electronic damping, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510342\u003c\/li\u003e\n\u003cli\u003eOnly for cars with a clamp diameter of 55 mm on the front axle\u003c\/li\u003e\n\u003cli\u003ePart number 182800CT\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eVolkswagen Golf, 2021 to current\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. ST Suspensions warranty applies.\u003c\/p\u003e","brand":"ST Suspensions","offers":[{"title":"Default Title","offer_id":46874716602447,"sku":"182800CT","price":2036.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/STS-0002792.jpg?v=1790060058"},{"product_id":"273800cj-st-height-adjustable-spring-kit-audi-a3-8y-volkswagen-golf-cd","title":"ST Height Adjustable Spring Kit - Audi A3 (8Y), Volkswagen Golf (CD)","description":"\u003cp\u003eST Height Adjustable Spring Kit for the Audi A3.\u003c\/p\u003e\u003ch3\u003eAbout ST height adjustable springs\u003c\/h3\u003e\u003cp\u003eThis kit uses an adjustable spring perch, so the ride height can be set within a range rather than fixed at one drop, while the car keeps its factory dampers.\u003c\/p\u003e\u003cp\u003eOur new ST Adjustable Lowering Springs are now available for a variety of makes and models. The innovative ST threaded sleeve provides perfect fitment no matter if your car is equipped with standard shocks or an electronic adaptive system. With our ST Adjustable Lowering Springs, it's easy to convert your stock suspension into a height adjustable system..\u003c\/p\u003e\u003cp\u003e• Works with electronically adaptive systems\u003c\/p\u003e\u003cp\u003eSimilar to coilover kits, the ST Adjustable Lowering Springs allow a seamless ride height adjustment for your vehicle in reasonable lowering ranges. We supply vehicle specific dust protection and spring components that are designed to give you the most out of your lowering. With ST Adjustable Lowering Springs you can expect a dynamic and sporty driving experience.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuits engines: 35 TDI, S3 quattro, 2.0 TSI, 2.0 RS, 2.0 TDI, 2.0 TSI RS, 2.0 GTI, 2.0 GTI Clubsport, 2.0 TSI R 4motion\u003c\/li\u003e\n\u003cli\u003eListed by ST for: Audi A3 (8Y) Sedan S3 2020-current; Audi A3 (8Y) Hatchback S3 2020-current; Volkswagen Golf (CD) (Mk8) Hatchback GTI 2021-current\u003c\/li\u003e\n\u003cli\u003eFront and rear height-adjustable (front and rear springs with height adjustment\u003c\/li\u003e\n\u003cli\u003eExcluding four wheel drive models\u003c\/li\u003e\n\u003cli\u003eOnly for 4 wheel drive models (4x4, 4motion, Quattro etc.)\u003c\/li\u003e\n\u003cli\u003ePart number 273800CJ\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAudi A3, 2020 to current\u003c\/li\u003e\n\u003cli\u003eVolkswagen Golf, 2021 to current\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA set of height adjustable springs for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. ST Suspensions warranty applies.\u003c\/p\u003e","brand":"ST Suspensions","offers":[{"title":"Default Title","offer_id":46874725515343,"sku":"273800CJ","price":1367.05,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/STS-0013185.jpg?v=1790060084"},{"product_id":"18202808ct-st-coilovers-st-xta-plus-3-galvanized-steel-adjustable-damping-with-top-mounts-audi-a3-8y-volkswagen-golf-cd","title":"ST Coilovers ST XTA plus 3 galvanized steel (adjustable damping with top mounts) - Audi A3 (8Y), Volkswagen Golf (CD)","description":"\u003cp\u003eST Coilovers ST XTA plus 3 galvanized steel (adjustable damping with top mounts) for the Audi A3.\u003c\/p\u003e\u003ch3\u003eAbout the ST XTA plus 3 coilovers\u003c\/h3\u003e\u003cp\u003eThe ST XTA plus 3 is the top coilover in the ST range, with adjustable damping, top mounts and the widest setup range ST offer, for a car being set up deliberately rather than just lowered.\u003c\/p\u003e\u003cp\u003eThe XTA plus 3 coilover kit gives your car maximum performance for the road and the tools you need for any challenge.\u003c\/p\u003e\u003cp\u003eFrom the factory, the XTA plus 3 coilover kit is equipped with KW dampers that are adjustable in high- and lowspeed compression as well as adjustable rebound damping. With 24 clicks of adjustment for each, high speed and low speed compression damping and 18 clicks of rebound adjustment, your suspension knows no limits. It doesn’t matter if you bolt in an aftermarket roll cage, weld in a cage, modification to PU bushings upgrade to spherical bushing or changed wheel loads – the XTA plus 3 coilover has what it takes to keep your car dialed! Of course, the XTA plus 3 also includes a parts approval certificate, race springs and aluminium unibal top mounts.\u003c\/p\u003e\u003cp\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA plus 3 coilovers due to the type of construction.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment, when possible\u003c\/li\u003e\n\u003cli\u003e3-way adjustable dampers:\u003c\/li\u003e\n\u003cli\u003eSuits engines: 30 TDI, 30 TFSI, 30 TFSi Mild Hybrid, 30 TFSI Mild Hybrid, 35 TDI, 35 TFSi, 35 TFSI, 35 TFSI Mild Hybrid, 40 TFSI, 1.5 eTSI, 1.5 TSI, 2.0 TDI, 2.0 TSI, 1.0 eTSI, 1.0 TSI, 1.4 TSI, 2.0 GTI, 2.0 GTI Clubsport, 2.0 TDI GTD, 2.0 TSI R 4motion\u003c\/li\u003e\n\u003cli\u003eListed by ST for: Audi A3 (8Y) Sedan 35 TFSI 2020-current; Audi A3 (8Y) Hatchback 30 TFSI 2020-current; Audi A3 (8Y) Hatchback 35 TFSI 2020-current; Volkswagen Golf (CD) (Mk8) Hatchback GTI 2021-current\u003c\/li\u003e\n\u003cli\u003eAt vehicles equipped with electronic damping, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510342\u003c\/li\u003e\n\u003cli\u003eOnly for cars with a clamp diameter of 55 mm on the front axle\u003c\/li\u003e\n\u003cli\u003ePart number 18202808CT\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAudi A3, 2020 to current\u003c\/li\u003e\n\u003cli\u003eVolkswagen Golf, 2021 to current\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. ST Suspensions warranty applies.\u003c\/p\u003e","brand":"ST Suspensions","offers":[{"title":"Default Title","offer_id":46874988511311,"sku":"18202808CT","price":3809.25,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/STS-0021551.jpg?v=1790060641"},{"product_id":"ipe-volkswagen-golf-gti-mk8-cat-back-system-0vmk8-nvno0-2","title":"iPE Cat Back System - Volkswagen Golf GTI Mk8","description":"\u003cp\u003eA stainless steel cat back system for the Volkswagen Golf GTI Mk8.\u003c\/p\u003e\u003ch3\u003eAbout iPE cat back systems\u003c\/h3\u003e\u003cp\u003eAn iPE cat back system replaces the factory exhaust from behind the catalytic converters through to the tips. Most use a valvetronic muffler, so the car can stay quiet around town and open up when you want the full sound.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 0VMK8-NVNO0-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve control:\u003c\/strong\u003e iPE remote included. Optional: iPE OBDII module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTips:\u003c\/strong\u003e chrome silver as standard, with titanium blue, chrome black, 3D carbon fibre satin silver, 3D carbon fibre satin black or 3D carbon fibre satin gold available\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eVolkswagen Golf GTI Mk8, 2021 on\u003c\/p\u003e\u003cul\u003e\u003cli\u003eVolkswagen Golf (CD) (Mk8) Hatchback: GTI\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCat Back System\u003c\/li\u003e\n\u003cli\u003eExhaust tips in your chosen finish\u003c\/li\u003e\n\u003cli\u003eiPE remote control\u003c\/li\u003e\n\u003cli\u003eValve control upgrade, if selected\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop.\u003c\/p\u003e","brand":"iPE","offers":[{"title":"Chrome Silver \/ iPE Remote","offer_id":67599430877263,"sku":"0VMK8-NVNO0-2","price":5230.0,"currency_code":"AUD","in_stock":true},{"title":"Chrome Silver \/ iPE Remote and OBDII","offer_id":67599430910031,"sku":"0VMK8-NVNO0-2\/1X-31-V0V0-8S-B1001","price":5720.0,"currency_code":"AUD","in_stock":true},{"title":"Titanium Blue \/ iPE Remote","offer_id":67599430942799,"sku":"0VMK8-NVNO0-2\/1VMK7-03-N0AT-7S","price":5465.0,"currency_code":"AUD","in_stock":true},{"title":"Titanium Blue \/ iPE Remote and OBDII","offer_id":67599430975567,"sku":"0VMK8-NVNO0-2\/1VMK7-03-N0AT-7S\/1X-31-V0V0-8S-B1001","price":5955.0,"currency_code":"AUD","in_stock":true},{"title":"Chrome Black \/ iPE Remote","offer_id":67599431008335,"sku":"0VMK8-NVNO0-2\/1VMK7-03-N0FB-7S","price":5565.0,"currency_code":"AUD","in_stock":true},{"title":"Chrome Black \/ iPE Remote and OBDII","offer_id":67599431041103,"sku":"0VMK8-NVNO0-2\/1VMK7-03-N0FB-7S\/1X-31-V0V0-8S-B1001","price":6055.0,"currency_code":"AUD","in_stock":true},{"title":"3D Carbon Fibre Satin Silver \/ iPE Remote","offer_id":67599431073871,"sku":"0VMK8-NVNO0-2\/1VMK7-03-N00M-7S-3D","price":6220.0,"currency_code":"AUD","in_stock":true},{"title":"3D Carbon Fibre Satin Silver \/ iPE Remote and OBDII","offer_id":67599431106639,"sku":"0VMK8-NVNO0-2\/1VMK7-03-N00M-7S-3D\/1X-31-V0V0-8S-B1001","price":6705.0,"currency_code":"AUD","in_stock":true},{"title":"3D Carbon Fibre Satin Black \/ iPE Remote","offer_id":67599431139407,"sku":"0VMK8-NVNO0-2\/1VMK7-03-N00W-7S-3D","price":6220.0,"currency_code":"AUD","in_stock":true},{"title":"3D Carbon Fibre Satin Black \/ iPE Remote and OBDII","offer_id":67599431172175,"sku":"0VMK8-NVNO0-2\/1VMK7-03-N00W-7S-3D\/1X-31-V0V0-8S-B1001","price":6705.0,"currency_code":"AUD","in_stock":true},{"title":"3D Carbon Fibre Satin Gold \/ iPE Remote","offer_id":67599431204943,"sku":"0VMK8-NVNO0-2\/1VMK7-03-N00Z-7S-3D","price":6220.0,"currency_code":"AUD","in_stock":true},{"title":"3D Carbon Fibre Satin Gold \/ iPE Remote and OBDII","offer_id":67599431237711,"sku":"0VMK8-NVNO0-2\/1VMK7-03-N00Z-7S-3D\/1X-31-V0V0-8S-B1001","price":6705.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/iPE_-_Volkswagen_-_Golf_GTI_MK8_-_catback_system_ca63a43b-6dea-470e-b3a1-b74313d75914.jpg?v=1790819299"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/collections\/hxm-car-vw-golf-gti-mk8.jpg?v=1795127991","url":"https:\/\/www.heasmans.com.au\/collections\/volkswagen-golf-gti-mk8.oembed","provider":"Heasmans","version":"1.0","type":"link"}