{"title":"Toyota Hilux (2015+)","description":"\u003cp\u003eLoad assist and lift kits for the Toyota Hilux (2015+) from Polyair, Bilstein and Reiger. Fitted at Sydenham or shipped Australia wide.\u003c\/p\u003e","products":[{"product_id":"handr-lift-springs-for-toyota-hilux","title":"H\u0026R Lift Springs - Toyota Hilux","description":"\u003cp\u003eH\u0026amp;R Lift Springs for the Toyota Hilux.\u003c\/p\u003e\u003ch3\u003eAbout the H\u0026amp;R Lift Springs\u003c\/h3\u003e\u003cp\u003eH\u0026amp;R Lift Springs raise the vehicle for extra ground clearance and a more upright stance, without changing how the suspension behaves at normal speeds. The spring is designed to keep the factory ride manners rather than firming everything up.\u003c\/p\u003e\u003cp\u003eThey work with the factory dampers and use the standard mounting points. The lift for this vehicle is listed in the specification.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHardened and tempered spring steel\u003c\/li\u003e\n\u003cli\u003eZinc phosphate coating for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eWorks with the factory dampers\u003c\/li\u003e\n\u003cli\u003ePart number 94137-2F-wc588\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eToyota HiLux AN120 N80 Ute, 2015 to 2025\u003c\/li\u003e\n\u003cli\u003eToyota HiLux AN130 N80 Ute, 2015 to 2025\u003c\/li\u003e\n\u003cli\u003eToyota HiLux AN30 Ute, 2005 to 2015\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH\u0026amp;R Lift Springs\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eProfessional fitting and a wheel alignment are recommended after installation.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. H\u0026amp;R warranty applies.\u003c\/p\u003e","brand":"H\u0026R Suspension","offers":[{"title":"Default Title","offer_id":45856160972879,"sku":"94137-2F-wc588","price":396.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/Tieferlegungsfedern-1_d7caa36b-1cd0-46aa-825a-c7c78423363c.jpg?v=1781681086"},{"product_id":"bilstein-b6-rear-shock-absorber-for-toyota-hilux-n60-1988-2005-2in","title":"Bilstein B6 Rear Shock Absorber for Toyota HiLux N60 1988-2005 (2in)","description":"\u003cp\u003eBilstein B6 rear shock absorber for the Toyota HiLux N60 1988-2005, for vehicles with a 2 inch lift.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: rear\u003c\/li\u003e\n\u003cli\u003eLift: 2 inch\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003ePart number B46 1035\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eToyota HiLux N50 Ute, 1990 to 1997\u003c\/li\u003e\n\u003cli\u003eToyota HiLux N60 Ute, 1997 to 2005\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber. Two are needed to do the rear of the vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811447951439,"sku":"B46 1035","price":335.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/B46-1035.jpg?v=1789780317"},{"product_id":"bilstein-b6-rear-shock-absorber-for-toyota-hilux-n60-1988-2005-standard","title":"Bilstein B6 Rear Shock Absorber for Toyota HiLux N60 1988-2005 (Standard)","description":"\u003cp\u003eBilstein B6 rear shock absorber for the Toyota HiLux N60 1988-2005, at standard ride height.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: rear\u003c\/li\u003e\n\u003cli\u003eSuits standard ride height\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003ePart number B46 1024\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eToyota HiLux N50 Ute, 1990 to 1997\u003c\/li\u003e\n\u003cli\u003eToyota HiLux N60 Ute, 1997 to 2005\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber. Two are needed to do the rear of the vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811448016975,"sku":"B46 1024","price":335.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/B46-1024.jpg?v=1789780317"},{"product_id":"bilstein-b6-front-shock-absorber-for-toyota-hilux-n60-1988-2005-0-2in","title":"Bilstein B6 Front Shock Absorber for Toyota HiLux N60 1988-2005 (0-2in)","description":"\u003cp\u003eBilstein B6 front shock absorber for the Toyota HiLux N60 1988-2005, suited to standard height through to a 2 inch lift.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: front\u003c\/li\u003e\n\u003cli\u003eLift: up to 2 inch\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003ePart number B46 1468\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eToyota HiLux N50 Ute, 1990 to 1997\u003c\/li\u003e\n\u003cli\u003eToyota HiLux N60 Ute, 1997 to 2005\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber. Two are needed to do the front of the vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811448049743,"sku":"B46 1468","price":335.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/B46-1468.jpg?v=1789780317"},{"product_id":"bilstein-b6-front-shock-absorber-for-toyota-hilux-n70-2005-2015-0-2in","title":"Bilstein B6 Front Shock Absorber for Toyota HiLux N70 2005-2015 (0-2in)","description":"\u003cp\u003eBilstein B6 front shock absorber for the Toyota HiLux N70 2005-2015, suited to standard height through to a 2 inch lift.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: front\u003c\/li\u003e\n\u003cli\u003eLift: up to 2 inch\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003ePart number BE5 D563\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eToyota HiLux AN30 Ute, 2005 to 2015\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber. Two are needed to do the front of the vehicle.\u003c\/p\u003e\u003cp\u003ePairs with the Bilstein B6 rear shock absorber for the same vehicle, part number BE5 D564.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811448836175,"sku":"BE5 D563","price":363.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/BE5-D563_37f0c0a5-5dba-4553-9ced-a407423a3f85.jpg?v=1789780321"},{"product_id":"bilstein-b6-rear-shock-absorber-for-toyota-hilux-n70-2005-2015-0-2in","title":"Bilstein B6 Rear Shock Absorber for Toyota HiLux N70 2005-2015 (0-2in)","description":"\u003cp\u003eBilstein B6 rear shock absorber for the Toyota HiLux N70 2005-2015, suited to standard height through to a 2 inch lift.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: rear\u003c\/li\u003e\n\u003cli\u003eLift: up to 2 inch\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003ePart number BE5 D564\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eToyota HiLux AN30 Ute, 2005 to 2015\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber. Two are needed to do the rear of the vehicle.\u003c\/p\u003e\u003cp\u003ePairs with the Bilstein B6 front shock absorber for the same vehicle, part number BE5 D563.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811448639567,"sku":"BE5 D564","price":335.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/BE5-D564-MAIN_093e087f-9db7-4fee-bf78-ed29fafb8588.jpg?v=1789780319"},{"product_id":"bilstein-b6-front-shock-absorber-for-toyota-hilux-n70-2005-2015-2in-3in","title":"Bilstein B6 Front Shock Absorber for Toyota HiLux N70 2005-2015 (2in-3in)","description":"\u003cp\u003eBilstein B6 front shock absorber for the Toyota HiLux N70 2005-2015, for vehicles with a 2 inch-3 inch lift.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: front\u003c\/li\u003e\n\u003cli\u003eLift: 2 inch-3 inch\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003ePart number BE5 D563-70\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eToyota HiLux AN30 Ute, 2005 to 2015\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber. Two are needed to do the front of the vehicle.\u003c\/p\u003e\u003cp\u003ePairs with the Bilstein B6 rear shock absorber for the same vehicle, part number 24-266451.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811448737871,"sku":"BE5 D563-70","price":429.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/Bilstein-Signet_216b6d74-0db3-4639-bb52-f9b40bb93a5e.jpg?v=1795143534"},{"product_id":"bilstein-b6-front-shock-absorber-for-toyota-hilux-n70-2005-2015-standard","title":"Bilstein B6 Front Shock Absorber for Toyota HiLux N70 2005-2015 (Standard)","description":"\u003cp\u003eBilstein B6 front shock absorber for the Toyota HiLux N70 2005-2015, at standard ride height.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: front\u003c\/li\u003e\n\u003cli\u003eSuits standard ride height\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003eTRD replacement, extended length 555mm\u003c\/li\u003e\n\u003cli\u003ePart number BE5 E232\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eToyota HiLux AN30 Ute, 2005 to 2015\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber. Two are needed to do the front of the vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811448770639,"sku":"BE5 E232","price":363.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/BE5-D563_9453ba1e-1dd0-4d53-8890-fd3304d39ea0.jpg?v=1789780319"},{"product_id":"bilstein-b6-rear-shock-absorber-for-toyota-hilux-n70-2005-2015-2in-3in","title":"Bilstein B6 Rear Shock Absorber for Toyota HiLux N70 2005-2015 (2in-3in)","description":"\u003cp\u003eBilstein B6 rear shock absorber for the Toyota HiLux N70 2005-2015, for vehicles with a 2 inch-3 inch lift.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: rear\u003c\/li\u003e\n\u003cli\u003eLift: 2 inch-3 inch\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003eExtended length 640mm, closed length 404mm, 14mm extension\u003c\/li\u003e\n\u003cli\u003ePart number 24-266451\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eToyota HiLux AN30 Ute, 2005 to 2015\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber. Two are needed to do the rear of the vehicle.\u003c\/p\u003e\u003cp\u003ePairs with the Bilstein B6 front shock absorber for the same vehicle, part number BE5 D563-70.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811448803407,"sku":"24-266451","price":335.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/BE5-D564-MAIN_5ff1d7a0-6d80-4d96-852b-847d7c3bbf36.jpg?v=1789780320"},{"product_id":"bilstein-b6-rear-shock-absorber-for-toyota-hilux-n70-2005-2015-0-2in-h-d-rate","title":"Bilstein B6 Rear Shock Absorber for Toyota HiLux N70 2005-2015 (0-2in) - H\/D Rate","description":"\u003cp\u003eBilstein B6 rear shock absorber for the Toyota HiLux N70 2005-2015, suited to standard height through to a 2 inch lift.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: rear\u003c\/li\u003e\n\u003cli\u003eLift: up to 2 inch\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003eHeavy duty damping rate\u003c\/li\u003e\n\u003cli\u003ePart number B46 1036LT\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eToyota HiLux AN30 Ute, 2005 to 2015\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber. Two are needed to do the rear of the vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811448868943,"sku":"B46 1036LT","price":335.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/B46-1036LT-t.png?v=1789780320"},{"product_id":"bilstein-springs-front-springs-for-toyota-hilux-n70-2005-2015-2in","title":"Bilstein Springs Front Springs for Toyota HiLux N70 2005-2015 (2in)","description":"\u003cp\u003eBilstein Springs front springs for the Toyota HiLux N70 2005-2015, for vehicles with a 2 inch lift.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein Springs\u003c\/h3\u003e\u003cp\u003eThese springs are supplied through Bilstein and manufactured by H\u0026amp;R. They raise the vehicle by the amount quoted on this product and are matched to the standard or raised damper for the same vehicle.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: front\u003c\/li\u003e\n\u003cli\u003eLift: 2 inch\u003c\/li\u003e\n\u003cli\u003eManufactured by H\u0026amp;R\u003c\/li\u003e\n\u003cli\u003ePart number 94137-2F\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eToyota HiLux AN30 Ute, 2005 to 2015\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA pair of springs for the front of the vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811448901711,"sku":"94137-2F","price":350.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/Bilstein-Signet_d0dad180-5cab-4d6d-86c4-cccdfe7557b8.jpg?v=1789780320"},{"product_id":"bilstein-b6-front-shock-absorber-for-toyota-hilux-4-runner-1985-1989-standard","title":"Bilstein B6 Front Shock Absorber for Toyota HiLux 4 Runner 1985-1989 (Standard)","description":"\u003cp\u003eBilstein B6 front shock absorber for the Toyota HiLux 4 Runner 1985-1989, at standard ride height.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: front\u003c\/li\u003e\n\u003cli\u003eSuits standard ride height\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003ePart number B46 1468\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber. Two are needed to do the front of the vehicle.\u003c\/p\u003e\u003cp\u003ePairs with the Bilstein B6 rear shock absorber for the same vehicle, part number B46 1469.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811449032783,"sku":"B46 1468","price":335.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/B46-1468_7355021b-2f3b-450b-96aa-516fc442b930.jpg?v=1789780320"},{"product_id":"bilstein-b6-rear-shock-absorber-for-toyota-hilux-4-runner-1985-1989-standard","title":"Bilstein B6 Rear Shock Absorber for Toyota HiLux 4 Runner 1985-1989 (Standard)","description":"\u003cp\u003eBilstein B6 rear shock absorber for the Toyota HiLux 4 Runner 1985-1989, at standard ride height.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: rear\u003c\/li\u003e\n\u003cli\u003eSuits standard ride height\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003ePart number B46 1469\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber. Two are needed to do the rear of the vehicle.\u003c\/p\u003e\u003cp\u003ePairs with the Bilstein B6 front shock absorber for the same vehicle, part number B46 1468.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811449065551,"sku":"B46 1469","price":330.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/B46-1469_56205b16-08c4-4fa1-b5d6-453f06ed3850.jpg?v=1795143318"},{"product_id":"bilstein-b6-front-shock-absorber-for-toyota-hilux-4-runner-1983-1990-standard","title":"Bilstein B6 Front Shock Absorber for Toyota HiLux 4 Runner 1983-1990 (Standard)","description":"\u003cp\u003eBilstein B6 front shock absorber for the Toyota HiLux 4 Runner 1983-1990, at standard ride height.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: front\u003c\/li\u003e\n\u003cli\u003eSuits standard ride height\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003ePart number B46 0425\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber. Two are needed to do the front of the vehicle.\u003c\/p\u003e\u003cp\u003ePairs with the Bilstein B6 rear shock absorber for the same vehicle, part number B46 1024.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811449131087,"sku":"B46 0425","price":335.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/B46-0425.jpg?v=1789780321"},{"product_id":"bilstein-b6-front-shock-absorber-for-toyota-hilux-4-runner-1983-1990-2in","title":"Bilstein B6 Front Shock Absorber for Toyota HiLux 4 Runner 1983-1990 (2in)","description":"\u003cp\u003eBilstein B6 front shock absorber for the Toyota HiLux 4 Runner 1983-1990, for vehicles with a 2 inch lift.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: front\u003c\/li\u003e\n\u003cli\u003eLift: 2 inch\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003ePart number B46 0078\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber. Two are needed to do the front of the vehicle.\u003c\/p\u003e\u003cp\u003ePairs with the Bilstein B6 rear shock absorber for the same vehicle, part number B46 1035.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811449163855,"sku":"B46 0078","price":335.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/B46-0078-t-1_3658cdbc-07f8-4465-bbf5-fe7fccece1e5.png?v=1789780321"},{"product_id":"bilstein-b6-rear-shock-absorber-for-toyota-hilux-4-runner-1983-1990-standard","title":"Bilstein B6 Rear Shock Absorber for Toyota HiLux 4 Runner 1983-1990 (Standard)","description":"\u003cp\u003eBilstein B6 rear shock absorber for the Toyota HiLux 4 Runner 1983-1990, at standard ride height.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: rear\u003c\/li\u003e\n\u003cli\u003eSuits standard ride height\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003ePart number B46 1024\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber. Two are needed to do the rear of the vehicle.\u003c\/p\u003e\u003cp\u003ePairs with the Bilstein B6 front shock absorber for the same vehicle, part number B46 0425.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811449196623,"sku":"B46 1024","price":335.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/B46-1024_9cd5e449-8d1a-4bd7-8bd6-a23875df5077.jpg?v=1789780321"},{"product_id":"bilstein-b6-rear-shock-absorber-for-toyota-hilux-4-runner-1983-1990-2in","title":"Bilstein B6 Rear Shock Absorber for Toyota HiLux 4 Runner 1983-1990 (2in)","description":"\u003cp\u003eBilstein B6 rear shock absorber for the Toyota HiLux 4 Runner 1983-1990, for vehicles with a 2 inch lift.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: rear\u003c\/li\u003e\n\u003cli\u003eLift: 2 inch\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003ePart number B46 1035\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber. Two are needed to do the rear of the vehicle.\u003c\/p\u003e\u003cp\u003ePairs with the Bilstein B6 front shock absorber for the same vehicle, part number B46 0078.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811449262159,"sku":"B46 1035","price":335.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/B46-1035_37b1fb5e-4745-406b-9be7-1be5e3daa68b.jpg?v=1789780321"},{"product_id":"bilstein-b6-kit-front-suspension-kit-for-toyota-hilux-rogue-gr-widebody-05-2020-2026-0-2in","title":"Bilstein B6 Kit Front Suspension Kit for Toyota HiLux Rogue \/ GR Widebody 05\/2020-2026 (0-2in)","description":"\u003cp\u003eBilstein B6 front kit suspension kit for the Toyota HiLux Rogue \/ GR Widebody 05\/2020-2026, suited to standard height through to a 2 inch lift.\u003c\/p\u003e\u003ch3\u003eAbout this kit\u003c\/h3\u003e\u003cp\u003eThis is a complete suspension package rather than a single part. It brings together Bilstein dampers, springs and the hardware needed to make the new ride height work, matched as a set so the vehicle keeps its geometry and its damping once it sits higher.\u003c\/p\u003e\u003cp\u003eKits come in load ratings, and in touring or towing variants, so the springs and damping suit the weight the vehicle actually carries. The lift and the full contents of this kit are listed below.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: front\u003c\/li\u003e\n\u003cli\u003eLift: up to 2 inch\u003c\/li\u003e\n\u003cli\u003eDampers: Bilstein B6 shock absorbers\u003c\/li\u003e\n\u003cli\u003eMatched kit, supplied as a complete set\u003c\/li\u003e\n\u003cli\u003eNot suitable with King Springs KTFR-114 or KTFR-114H\u003c\/li\u003e\n\u003cli\u003ePart number ROGUEFRT\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eToyota HiLux AN130 N80 Ute, 2018 to 2025\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811449294927,"sku":"ROGUEFRT","price":550.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/B6KIT-GRHILUXROGUE-SML.png?v=1789780322"},{"product_id":"bilstein-b6-kit-rear-suspension-kit-for-toyota-hilux-rogue-gr-widebody-05-2020-2026-0-2in","title":"Bilstein B6 Kit Rear Suspension Kit for Toyota HiLux Rogue \/ GR Widebody 05\/2020-2026 (0-2in)","description":"\u003cp\u003eBilstein B6 rear kit suspension kit for the Toyota HiLux Rogue \/ GR Widebody 05\/2020-2026, suited to standard height through to a 2 inch lift.\u003c\/p\u003e\u003ch3\u003eAbout this kit\u003c\/h3\u003e\u003cp\u003eThis is a complete suspension package rather than a single part. It brings together Bilstein dampers, springs and the hardware needed to make the new ride height work, matched as a set so the vehicle keeps its geometry and its damping once it sits higher.\u003c\/p\u003e\u003cp\u003eKits come in load ratings, and in touring or towing variants, so the springs and damping suit the weight the vehicle actually carries. The lift and the full contents of this kit are listed below.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: rear\u003c\/li\u003e\n\u003cli\u003eLift: up to 2 inch\u003c\/li\u003e\n\u003cli\u003eDampers: Bilstein B6 shock absorbers\u003c\/li\u003e\n\u003cli\u003eMatched kit, supplied as a complete set\u003c\/li\u003e\n\u003cli\u003eMade in Australia in batches\u003c\/li\u003e\n\u003cli\u003ePart number ROGUER\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eToyota HiLux AN130 N80 Ute, 2018 to 2025\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811449327695,"sku":"ROGUER","price":550.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/B6KIT-GRHILUXROGUE-SML_283fc0d1-0b07-46dd-8def-ddd6edf650a8.png?v=1789780322"},{"product_id":"bilstein-b6-front-shock-absorber-for-toyota-hilux-surf-1997-2001-standard-yn130-ln130","title":"Bilstein B6 Front Shock Absorber for Toyota HiLux Surf 1997-2001 (Standard) - YN130, LN130","description":"\u003cp\u003eBilstein B6 front shock absorber for the Toyota HiLux Surf 1997-2001, at standard ride height.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: front\u003c\/li\u003e\n\u003cli\u003eSuits standard ride height\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003ePart number B46 1468\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber. Two are needed to do the front of the vehicle.\u003c\/p\u003e\u003cp\u003ePairs with the Bilstein B6 rear shock absorber for the same vehicle, part number B46 1469.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811449360463,"sku":"B46 1468","price":335.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/B46-1468_5cd69276-3b1c-43ec-81ec-4eb67b2eed89.jpg?v=1789780322"},{"product_id":"bilstein-b6-rear-shock-absorber-for-toyota-hilux-surf-1997-2001-standard-yn130-ln130","title":"Bilstein B6 Rear Shock Absorber for Toyota HiLux Surf 1997-2001 (Standard) - YN130, LN130","description":"\u003cp\u003eBilstein B6 rear shock absorber for the Toyota HiLux Surf 1997-2001, at standard ride height.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: rear\u003c\/li\u003e\n\u003cli\u003eSuits standard ride height\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003ePart number B46 1469\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber. Two are needed to do the rear of the vehicle.\u003c\/p\u003e\u003cp\u003ePairs with the Bilstein B6 front shock absorber for the same vehicle, part number B46 1468.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811449393231,"sku":"B46 1469","price":330.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/B46-1469_e1fabda3-0e22-4042-b51c-6dc73d34574d.jpg?v=1795143318"},{"product_id":"bilstein-b6-rear-shock-absorber-for-toyota-hilux-n80-2016-2026-0-2in","title":"Bilstein B6 Rear Shock Absorber for Toyota HiLux N80 2016-2026 (0-2in)","description":"\u003cp\u003eBilstein B6 rear shock absorber for the Toyota HiLux N80 2016-2026, suited to standard height through to a 2 inch lift.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: rear\u003c\/li\u003e\n\u003cli\u003eLift: up to 2 inch\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003ePart number BE5 D564\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eToyota HiLux AN120 N80 Ute, 2015 to 2025\u003c\/li\u003e\n\u003cli\u003eToyota HiLux AN130 N80 Ute, 2015 to 2025\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber. Two are needed to do the rear of the vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811449557071,"sku":"BE5 D564","price":335.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/BE5-D564-MAIN_c0a32bbf-74a8-44ea-a4e2-3523f69574de.jpg?v=1789780322"},{"product_id":"bilstein-b6-front-shock-absorber-for-toyota-hilux-n80-2016-2026-1in-2in","title":"Bilstein B6 Front Shock Absorber for Toyota HiLux N80 2016-2026 (1in-2in)","description":"\u003cp\u003eBilstein B6 front shock absorber for the Toyota HiLux N80 2016-2026, for vehicles with a 1 inch-2 inch lift.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: front\u003c\/li\u003e\n\u003cli\u003eLift: 1 inch-2 inch\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003ePart number BE5 D563\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eToyota HiLux AN120 N80 Ute, 2015 to 2025\u003c\/li\u003e\n\u003cli\u003eToyota HiLux AN130 N80 Ute, 2015 to 2025\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber. Two are needed to do the front of the vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811449589839,"sku":"BE5 D563","price":363.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/BE5-D563_1a9721be-1919-49bb-be94-283b5e9c8134.jpg?v=1789780323"},{"product_id":"bilstein-b6-rear-shock-absorber-for-toyota-hilux-surf-1997-2001-standard-kzn185","title":"Bilstein B6 Rear Shock Absorber for Toyota HiLux Surf 1997-2001 (Standard) - KZN185","description":"\u003cp\u003eBilstein B6 rear shock absorber for the Toyota HiLux Surf 1997-2001, at standard ride height.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: rear\u003c\/li\u003e\n\u003cli\u003eSuits standard ride height\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003ePart number BE5 2451M\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber. Two are needed to do the rear of the vehicle.\u003c\/p\u003e\u003cp\u003ePairs with the Bilstein B6 front shock absorber for the same vehicle, part number BE5 2450M.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811449655375,"sku":"BE5 2451M","price":335.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/B46-2451M.jpg?v=1789780322"},{"product_id":"bilstein-b6-front-shock-absorber-for-toyota-hilux-n80-2016-2026-2in-3in","title":"Bilstein B6 Front Shock Absorber for Toyota HiLux N80 2016-2026 (2in-3in)","description":"\u003cp\u003eBilstein B6 front shock absorber for the Toyota HiLux N80 2016-2026, for vehicles with a 2 inch-3 inch lift.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: front\u003c\/li\u003e\n\u003cli\u003eLift: 2 inch-3 inch\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003ePart number BE5 D563-80\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eToyota HiLux AN120 N80 Ute, 2015 to 2025\u003c\/li\u003e\n\u003cli\u003eToyota HiLux AN130 N80 Ute, 2015 to 2025\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber. Two are needed to do the front of the vehicle.\u003c\/p\u003e\u003cp\u003ePairs with the Bilstein B6 rear shock absorber for the same vehicle, part number 24-266451.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811449720911,"sku":"BE5 D563-80","price":396.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/Bilstein-Signet_582deb21-0db1-486e-8d90-7e927d1a46fb.jpg?v=1795143534"},{"product_id":"bilstein-b6-front-shock-absorber-for-toyota-hilux-surf-1997-2001-standard-kzn185","title":"Bilstein B6 Front Shock Absorber for Toyota HiLux Surf 1997-2001 (Standard) - KZN185","description":"\u003cp\u003eBilstein B6 front shock absorber for the Toyota HiLux Surf 1997-2001, at standard ride height.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: front\u003c\/li\u003e\n\u003cli\u003eSuits standard ride height\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003ePart number BE5 2450M\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber. Two are needed to do the front of the vehicle.\u003c\/p\u003e\u003cp\u003ePairs with the Bilstein B6 rear shock absorber for the same vehicle, part number BE5 2451M.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811449753679,"sku":"BE5 2450M","price":363.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/B46-2450M.jpg?v=1789780323"},{"product_id":"bilstein-b6-front-shock-absorber-for-toyota-hilux-n80-2016-2026-standard","title":"Bilstein B6 Front Shock Absorber for Toyota HiLux N80 2016-2026 (Standard)","description":"\u003cp\u003eBilstein B6 front shock absorber for the Toyota HiLux N80 2016-2026, at standard ride height.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: front\u003c\/li\u003e\n\u003cli\u003eSuits standard ride height\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003ePart number 24-269377\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eToyota HiLux AN120 N80 Ute, 2015 to 2025\u003c\/li\u003e\n\u003cli\u003eToyota HiLux AN130 N80 Ute, 2015 to 2025\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber. Two are needed to do the front of the vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811449819215,"sku":"24-269377","price":363.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/BE5-D563_950b2f5c-687f-4a43-bda6-6fa6ace9188a.jpg?v=1789780322"},{"product_id":"bilstein-b6-rear-shock-absorber-for-toyota-hilux-n80-2016-2026-0-2in-h-d-rate","title":"Bilstein B6 Rear Shock Absorber for Toyota HiLux N80 2016-2026 (0-2in) - H\/D Rate","description":"\u003cp\u003eBilstein B6 rear shock absorber for the Toyota HiLux N80 2016-2026, suited to standard height through to a 2 inch lift.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: rear\u003c\/li\u003e\n\u003cli\u003eLift: up to 2 inch\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003eHeavy duty damping rate\u003c\/li\u003e\n\u003cli\u003ePart number B46 1036LT\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eToyota HiLux AN120 N80 Ute, 2015 to 2025\u003c\/li\u003e\n\u003cli\u003eToyota HiLux AN130 N80 Ute, 2015 to 2025\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber. Two are needed to do the rear of the vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811449983055,"sku":"B46 1036LT","price":335.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/B46-1036LT-t_9dd07650-bb60-44cd-8825-c1a0b2e04725.png?v=1789780324"},{"product_id":"bilstein-b6-rear-shock-absorber-for-toyota-hilux-n80-2016-2026-2in-3in","title":"Bilstein B6 Rear Shock Absorber for Toyota HiLux N80 2016-2026 (2in-3in)","description":"\u003cp\u003eBilstein B6 rear shock absorber for the Toyota HiLux N80 2016-2026, for vehicles with a 2 inch-3 inch lift.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: rear\u003c\/li\u003e\n\u003cli\u003eLift: 2 inch-3 inch\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003eExtended length 640mm, closed length 404mm, 14mm extension\u003c\/li\u003e\n\u003cli\u003ePart number 24-266451\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eToyota HiLux AN120 N80 Ute, 2015 to 2025\u003c\/li\u003e\n\u003cli\u003eToyota HiLux AN130 N80 Ute, 2015 to 2025\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber. Two are needed to do the rear of the vehicle.\u003c\/p\u003e\u003cp\u003ePairs with the Bilstein B6 front shock absorber for the same vehicle, part number BE5 D563-80.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811450015823,"sku":"24-266451","price":335.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/BE5-D564-MAIN_0e4dc1ac-c2c7-497a-a36d-649dbee87c76.jpg?v=1789780323"},{"product_id":"bilstein-b6-kit-front-and-rear-suspension-kit-for-toyota-hilux-n90-2026-on-0-2in","title":"Bilstein B6 Kit Front and Rear Suspension Kit for Toyota HiLux N90 2026 on (0-2in)","description":"\u003cp\u003eBilstein B6 front and rear kit suspension kit for the Toyota HiLux N90 2026 on, suited to standard height through to a 2 inch lift.\u003c\/p\u003e\u003ch3\u003eAbout this kit\u003c\/h3\u003e\u003cp\u003eThis is a complete suspension package rather than a single part. It brings together Bilstein dampers, springs and the hardware needed to make the new ride height work, matched as a set so the vehicle keeps its geometry and its damping once it sits higher.\u003c\/p\u003e\u003cp\u003eKits come in load ratings, and in touring or towing variants, so the springs and damping suit the weight the vehicle actually carries. The lift and the full contents of this kit are listed below.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: front and rear\u003c\/li\u003e\n\u003cli\u003eLift: up to 2 inch\u003c\/li\u003e\n\u003cli\u003eDampers: Bilstein B6 shock absorbers\u003c\/li\u003e\n\u003cli\u003eMatched kit, supplied as a complete set\u003c\/li\u003e\n\u003cli\u003ePart number 46-420001\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eToyota HiLux AN230 N90 Ute, 2025 to current\u003c\/li\u003e\n\u003cli\u003eToyota HiLux XPN225 N90 Ute, 2026 to current\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eIncludes two front shocks (HILUXN90FRT) and two rear shocks (HILUXN90RR), made in Australia\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811450507343,"sku":"46-420001","price":2200.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/46-420001.png?v=1789780326"},{"product_id":"reiger-mt-rc-2-5-coilover-kit-toyota-hilux-an120-an130-r0556032","title":"Reiger MT-RC 2.5 Coilover Kit - Toyota HiLux (AN120 \/ AN130)","description":"\u003cp\u003eReiger MT-RC 2.5 Coilover Kit for the Toyota HiLux (AN120 \/ AN130).\u003c\/p\u003e\u003ch3\u003eAbout the Reiger MT-RC 2.5\u003c\/h3\u003e\u003cp\u003eThe MT-RC 2.5 is Reiger's 2.5 inch off-road damper, built for a four wheel drive that is driven on the road during the week and worked on dirt at the weekend. It carries the damping control Reiger built their name on in rally and Dakar, in a package sized for a standard ute or wagon.\u003c\/p\u003e\u003cp\u003eReiger are a Dutch damper manufacturer with a motorsport background, and the kits are supplied as a complete coilover for the vehicle named on this product.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2.5 inch damper body\u003c\/li\u003e\n\u003cli\u003eComplete coilover kit for this vehicle\u003c\/li\u003e\n\u003cli\u003eFour wheel drive models only\u003c\/li\u003e\n\u003cli\u003eListed by Reiger for: Toyota HILUX 2015 2.4L Turbo-Diesel; Toyota HILUX 2015-2020 2.8L Turbo-Diesel; Toyota HILUX 2020 2.8L Turbo-Diesel\u003c\/li\u003e\n\u003cli\u003ePart number R0556032\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eToyota HiLux, 2015 to 2025\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear coilover kit for one vehicle.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eAsk us about spring rates and setup for your vehicle and the load it carries before ordering.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Reiger warranty applies.\u003c\/p\u003e","brand":"Reiger Suspension","offers":[{"title":"Default Title","offer_id":46872731484239,"sku":"R0556032","price":8799.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/REG-0029196.jpg?v=1790042561"},{"product_id":"polyair-75595","title":"Polyair Red Series Airbag Kit - Toyota HiLux N70 (standard height)","description":"\u003cp\u003ePolyair Red Series Airbag Kit for the Toyota HiLux N70 (standard height).\u003c\/p\u003e\u003ch3\u003eAbout the Polyair Red Series\u003c\/h3\u003e\u003cp\u003eThe Red Series is Polyair's in-coil airbag, made to sit inside the rear coil spring of a four wheel drive, ute or wagon and take the sag out of it when the vehicle is loaded or towing. Pressure is adjustable from 5 to 35psi, so the same car can ride softly empty and sit level with a van on the back.\u003c\/p\u003e\u003cp\u003eThe bag is moulded polyurethane, 3 to 4mm thick, which is what lets it live inside a coil without being cut by a stone. Fitting needs basic tools and the kit comes with everything: two air springs, two valves, airline, fittings, hardware and instructions.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuits standard height\u003c\/li\u003e\n\u003cli\u003eRed series with coil retainer\u003c\/li\u003e\n\u003cli\u003eListed by Polyair for: Toyota HiLux N70 2005 - 2015, 4WD\u003c\/li\u003e\n\u003cli\u003ePart number 75595\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eToyota HiLux AN30, 2005 to 2015\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete airbag kit for one vehicle: two air springs, two valves, airline, fittings, mounting hardware and instructions.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Polyair warranty applies.\u003c\/p\u003e","brand":"Polyair","offers":[{"title":"Default Title","offer_id":50559713312847,"sku":"75595","price":435.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/360_F_504289605_zehJiK0tCuZLP2MdfFBpcJdOVxKLnXg1_0eca4ade-2159-48cf-aa45-b115e8006b1a.jpg?v=1790568021"},{"product_id":"polyair-75795","title":"Polyair Red Series Airbag Kit - Toyota HiLux N70 (2 inch lift)","description":"\u003cp\u003ePolyair Red Series Airbag Kit for the Toyota HiLux N70 (2 inch lift).\u003c\/p\u003e\u003ch3\u003eAbout the Polyair Red Series\u003c\/h3\u003e\u003cp\u003eThe Red Series is Polyair's in-coil airbag, made to sit inside the rear coil spring of a four wheel drive, ute or wagon and take the sag out of it when the vehicle is loaded or towing. Pressure is adjustable from 5 to 35psi, so the same car can ride softly empty and sit level with a van on the back.\u003c\/p\u003e\u003cp\u003eThe bag is moulded polyurethane, 3 to 4mm thick, which is what lets it live inside a coil without being cut by a stone. Fitting needs basic tools and the kit comes with everything: two air springs, two valves, airline, fittings, hardware and instructions.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuits 2 inch lift\u003c\/li\u003e\n\u003cli\u003eRed series with coil retainer\u003c\/li\u003e\n\u003cli\u003eListed by Polyair for: Toyota HiLux N70 2005 - 2015, 4WD\u003c\/li\u003e\n\u003cli\u003ePart number 75795\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eToyota HiLux AN30, 2005 to 2015\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete airbag kit for one vehicle: two air springs, two valves, airline, fittings, mounting hardware and instructions.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Polyair warranty applies.\u003c\/p\u003e","brand":"Polyair","offers":[{"title":"Default Title","offer_id":50559713378383,"sku":"75795","price":435.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/LogoSquare_8ce45457-11e6-440c-9475-b039d00d60d1.jpg?v=1790568025"},{"product_id":"polyair-78703","title":"Polyair Red Series Airbag Kit - Toyota HiLux \u0026 6 (standard height)","description":"\u003cp\u003ePolyair Red Series Airbag Kit for the Toyota HiLux \u0026amp; 6 (standard height).\u003c\/p\u003e\u003ch3\u003eAbout the Polyair Red Series\u003c\/h3\u003e\u003cp\u003eThe Red Series is Polyair's in-coil airbag, made to sit inside the rear coil spring of a four wheel drive, ute or wagon and take the sag out of it when the vehicle is loaded or towing. Pressure is adjustable from 5 to 35psi, so the same car can ride softly empty and sit level with a van on the back.\u003c\/p\u003e\u003cp\u003eThe bag is moulded polyurethane, 3 to 4mm thick, which is what lets it live inside a coil without being cut by a stone. Fitting needs basic tools and the kit comes with everything: two air springs, two valves, airline, fittings, hardware and instructions.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuits standard height\u003c\/li\u003e\n\u003cli\u003eRed series with coil retainer \/ light duty only\u003c\/li\u003e\n\u003cli\u003eListed by Polyair for: Toyota HiLux \u0026amp; 6 1988 - 2004, RWD + 4WD\u003c\/li\u003e\n\u003cli\u003ePart number 78703\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eToyota HiLux N50, 1990 to 1997\u003c\/li\u003e\n\u003cli\u003eToyota HiLux N60, 1997 to 2005\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete airbag kit for one vehicle: two air springs, two valves, airline, fittings, mounting hardware and instructions.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Polyair warranty applies.\u003c\/p\u003e","brand":"Polyair","offers":[{"title":"Default Title","offer_id":50559713443919,"sku":"78703","price":435.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/LogoSquare_b1aebc49-fd12-4b75-9405-a71d631256a7.jpg?v=1790568025"},{"product_id":"polyair-78903","title":"Polyair Red Series Airbag Kit - Toyota HiLux \u0026 6 (2 inch lift)","description":"\u003cp\u003ePolyair Red Series Airbag Kit for the Toyota HiLux \u0026amp; 6 (2 inch lift).\u003c\/p\u003e\u003ch3\u003eAbout the Polyair Red Series\u003c\/h3\u003e\u003cp\u003eThe Red Series is Polyair's in-coil airbag, made to sit inside the rear coil spring of a four wheel drive, ute or wagon and take the sag out of it when the vehicle is loaded or towing. Pressure is adjustable from 5 to 35psi, so the same car can ride softly empty and sit level with a van on the back.\u003c\/p\u003e\u003cp\u003eThe bag is moulded polyurethane, 3 to 4mm thick, which is what lets it live inside a coil without being cut by a stone. Fitting needs basic tools and the kit comes with everything: two air springs, two valves, airline, fittings, hardware and instructions.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuits 2 inch lift\u003c\/li\u003e\n\u003cli\u003eRed series with coil retainer \/ light duty only\u003c\/li\u003e\n\u003cli\u003eListed by Polyair for: Toyota HiLux \u0026amp; 6 1988 - 2004, RWD + 4WD\u003c\/li\u003e\n\u003cli\u003ePart number 78903\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eToyota HiLux N50, 1990 to 1997\u003c\/li\u003e\n\u003cli\u003eToyota HiLux N60, 1997 to 2005\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete airbag kit for one vehicle: two air springs, two valves, airline, fittings, mounting hardware and instructions.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Polyair warranty applies.\u003c\/p\u003e","brand":"Polyair","offers":[{"title":"Default Title","offer_id":50559713607759,"sku":"78903","price":435.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/LogoSquare_fada72e8-57b5-428a-976f-306c75c9e403.jpg?v=1790568025"},{"product_id":"polyair-85304","title":"Polyair Bellows Airbag Kit - Toyota HiLux \u0026 6 (standard height) [85304]","description":"\u003cp\u003ePolyair Bellows Airbag Kit for the Toyota HiLux \u0026amp; 6 (standard height).\u003c\/p\u003e\u003ch3\u003eAbout the Polyair Bellows\u003c\/h3\u003e\u003cp\u003eBellows are Polyair's airbag for leaf sprung vehicles, mounting between the chassis and the axle rather than inside a spring. Pressure adjusts from 5 to 100psi, which is a much wider range than an in-coil bag, so they carry more and level a heavier load.\u003c\/p\u003e\u003cp\u003eConstruction is two-ply fabric reinforced rubber with Zytel nylon end caps, and the kit includes an internal bump stop, valves, airline, fittings and mounting hardware.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuits standard height\u003c\/li\u003e\n\u003cli\u003eCradle kit ABC100 is required on lifted vehicles\u003c\/li\u003e\n\u003cli\u003eListed by Polyair for: Toyota HiLux \u0026amp; 6 1988 - 2004, 2WD\u003c\/li\u003e\n\u003cli\u003ePart number 85304\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eToyota HiLux N50, 1990 to 1997\u003c\/li\u003e\n\u003cli\u003eToyota HiLux N60, 1997 to 2005\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete airbag kit for one vehicle: two air springs, two valves, airline, fittings, mounting hardware and instructions.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Polyair warranty applies.\u003c\/p\u003e","brand":"Polyair","offers":[{"title":"Default Title","offer_id":50559714361423,"sku":"85304","price":850.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/85304_ddf53f06-1375-4070-8d23-59d8eb271926.jpg?v=1790568030"},{"product_id":"polyair-85303","title":"Polyair Bellows Airbag Kit - Toyota HiLux \u0026 6 (standard height) [85303]","description":"\u003cp\u003ePolyair Bellows Airbag Kit for the Toyota HiLux \u0026amp; 6 (standard height).\u003c\/p\u003e\u003ch3\u003eAbout the Polyair Bellows\u003c\/h3\u003e\u003cp\u003eBellows are Polyair's airbag for leaf sprung vehicles, mounting between the chassis and the axle rather than inside a spring. Pressure adjusts from 5 to 100psi, which is a much wider range than an in-coil bag, so they carry more and level a heavier load.\u003c\/p\u003e\u003cp\u003eConstruction is two-ply fabric reinforced rubber with Zytel nylon end caps, and the kit includes an internal bump stop, valves, airline, fittings and mounting hardware.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuits standard height\u003c\/li\u003e\n\u003cli\u003eCradle kit ABC100 is required on lifted vehicles\u003c\/li\u003e\n\u003cli\u003eListed by Polyair for: Toyota HiLux \u0026amp; 6 1988 - 2004, 4WD\u003c\/li\u003e\n\u003cli\u003ePart number 85303\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eToyota HiLux N50, 1990 to 1997\u003c\/li\u003e\n\u003cli\u003eToyota HiLux N60, 1997 to 2005\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete airbag kit for one vehicle: two air springs, two valves, airline, fittings, mounting hardware and instructions.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Polyair warranty applies.\u003c\/p\u003e","brand":"Polyair","offers":[{"title":"Default Title","offer_id":50559714394191,"sku":"85303","price":850.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/85303_887a7e4e-6987-4082-84f1-3232f9034946.jpg?v=1790568030"},{"product_id":"polyair-88203-2r","title":"Polyair Bellows Airbag Kit - Toyota HiLux N70 (2 inch lift)","description":"\u003cp\u003ePolyair Bellows Airbag Kit for the Toyota HiLux N70 (2 inch lift).\u003c\/p\u003e\u003ch3\u003eAbout the Polyair Bellows\u003c\/h3\u003e\u003cp\u003eBellows are Polyair's airbag for leaf sprung vehicles, mounting between the chassis and the axle rather than inside a spring. Pressure adjusts from 5 to 100psi, which is a much wider range than an in-coil bag, so they carry more and level a heavier load.\u003c\/p\u003e\u003cp\u003eConstruction is two-ply fabric reinforced rubber with Zytel nylon end caps, and the kit includes an internal bump stop, valves, airline, fittings and mounting hardware.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuits 2 inch lift\u003c\/li\u003e\n\u003cli\u003eCradle kit ABC100 is required on lifted vehicles\u003c\/li\u003e\n\u003cli\u003eListed by Polyair for: Toyota HiLux N70 2005 - 2015, 4WD\u003c\/li\u003e\n\u003cli\u003ePart number 88203-2R\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eToyota HiLux AN30, 2005 to 2015\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete airbag kit for one vehicle: two air springs, two valves, airline, fittings, mounting hardware and instructions.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Polyair warranty applies.\u003c\/p\u003e","brand":"Polyair","offers":[{"title":"Default Title","offer_id":50559714951247,"sku":"88203-2R","price":960.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/88203-2_S-1_45c2f920-4b80-4171-989e-8cbf93e07d6a.png?v=1790568033"},{"product_id":"polyair-88203-2","title":"Polyair Bellows Airbag Kit - Toyota HiLux N70 (0 to 1 inch lift)","description":"\u003cp\u003ePolyair Bellows Airbag Kit for the Toyota HiLux N70 (0 to 1 inch lift).\u003c\/p\u003e\u003ch3\u003eAbout the Polyair Bellows\u003c\/h3\u003e\u003cp\u003eBellows are Polyair's airbag for leaf sprung vehicles, mounting between the chassis and the axle rather than inside a spring. Pressure adjusts from 5 to 100psi, which is a much wider range than an in-coil bag, so they carry more and level a heavier load.\u003c\/p\u003e\u003cp\u003eConstruction is two-ply fabric reinforced rubber with Zytel nylon end caps, and the kit includes an internal bump stop, valves, airline, fittings and mounting hardware.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuits 0 to 1 inch lift\u003c\/li\u003e\n\u003cli\u003eCradle kit ABC100 is required on lifted vehicles\u003c\/li\u003e\n\u003cli\u003eListed by Polyair for: Toyota HiLux N70 2005 - 2015, 4WD\u003c\/li\u003e\n\u003cli\u003ePart number 88203-2\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eToyota HiLux AN30, 2005 to 2015\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete airbag kit for one vehicle: two air springs, two valves, airline, fittings, mounting hardware and instructions.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Polyair warranty applies.\u003c\/p\u003e","brand":"Polyair","offers":[{"title":"Default Title","offer_id":50559715049551,"sku":"88203-2","price":960.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/88203-2_S-2_91db3a7d-8dfb-4707-afbc-4aa449810e86.png?v=1790568034"},{"product_id":"polyair-88233-3","title":"Polyair N80 Hilux Airbag Kit - Standard Height","description":"\u003cp\u003ePolyair N80 Hilux Airbag Kit for the Standard Height.\u003c\/p\u003e\u003ch3\u003eAbout this part\u003c\/h3\u003e\u003cp\u003eA genuine Polyair replacement part for their airbag kits.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eToyota N80 Hilux Airbag Kit - Standard Height \\n \\n*Does not suit GR \/ Rogue Widebody Models \\n*Also suits 2WD Hi-Ride Models\u003c\/li\u003e\n\u003cli\u003ePart number 88233-3\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne n80 hilux airbag kit - standard height, as described above.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Polyair warranty applies.\u003c\/p\u003e","brand":"Polyair","offers":[{"title":"Default Title","offer_id":50559715180623,"sku":"88233-3","price":960.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/88233-3_bcfc8a86-19ac-465b-8c67-eee930cc29ad.jpg?v=1790568033"},{"product_id":"polyair-88233-3r","title":"Polyair N80 Hilux Airbag Kit - 2\" Lift","description":"\u003cp\u003ePolyair N80 Hilux Airbag Kit for the 2\" Lift.\u003c\/p\u003e\u003ch3\u003eAbout this part\u003c\/h3\u003e\u003cp\u003eA genuine Polyair replacement part for their airbag kits.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eToyota N80 Hilux Airbag Kit \\n \\n*Does not suit GR \/ Rogue Widebody Models \\n*Also suits 2WD Hi-Ride Models\u003c\/li\u003e\n\u003cli\u003ePart number 88233-3R\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne n80 hilux airbag kit - 2\" lift, as described above.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Polyair warranty applies.\u003c\/p\u003e","brand":"Polyair","offers":[{"title":"Default Title","offer_id":50559715213391,"sku":"88233-3R","price":960.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/88233-3R_e5e3db0a-f48a-4e3e-8cb0-2529892c2246.png?v=1790568034"},{"product_id":"polyair-88107","title":"Polyair Bellows Airbag Kit - Toyota HiLux N70, Toyota HiLux N80 (standard height)","description":"\u003cp\u003ePolyair Bellows Airbag Kit for the Toyota HiLux N70, Toyota HiLux N80 (standard height).\u003c\/p\u003e\u003ch3\u003eAbout the Polyair Bellows\u003c\/h3\u003e\u003cp\u003eBellows are Polyair's airbag for leaf sprung vehicles, mounting between the chassis and the axle rather than inside a spring. Pressure adjusts from 5 to 100psi, which is a much wider range than an in-coil bag, so they carry more and level a heavier load.\u003c\/p\u003e\u003cp\u003eConstruction is two-ply fabric reinforced rubber with Zytel nylon end caps, and the kit includes an internal bump stop, valves, airline, fittings and mounting hardware.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuits standard height\u003c\/li\u003e\n\u003cli\u003eCradle kit ABC100 is required on lifted vehicles\u003c\/li\u003e\n\u003cli\u003e*Does not suit 4WD or 2WD Hi-Ride Models\u003c\/li\u003e\n\u003cli\u003eListed by Polyair for: Toyota HiLux N70 2005 - 2015, 2WD; Toyota HiLux N80 2015 - 2025, 2WD\u003c\/li\u003e\n\u003cli\u003ePart number 88107\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eToyota HiLux AN10, 2005 to 2015\u003c\/li\u003e\n\u003cli\u003eToyota HiLux AN120, 2015 to 2025\u003c\/li\u003e\n\u003cli\u003eToyota HiLux AN130, 2015 to 2025\u003c\/li\u003e\n\u003cli\u003eToyota HiLux AN20, 2008 to 2015\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete airbag kit for one vehicle: two air springs, two valves, airline, fittings, mounting hardware and instructions.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Polyair warranty applies.\u003c\/p\u003e","brand":"Polyair","offers":[{"title":"Default Title","offer_id":50559715278927,"sku":"88107","price":960.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/88107_fe73b503-8152-49dc-bd4a-4b81b90967cd.jpg?v=1790568035"},{"product_id":"polyair-88235r","title":"Polyair Bellows Airbag Kit - Toyota HiLux Widebody Rogue \/ GR (2 inch lift)","description":"\u003cp\u003ePolyair Bellows Airbag Kit for the Toyota HiLux Widebody Rogue \/ GR (2 inch lift).\u003c\/p\u003e\u003ch3\u003eAbout the Polyair Bellows\u003c\/h3\u003e\u003cp\u003eBellows are Polyair's airbag for leaf sprung vehicles, mounting between the chassis and the axle rather than inside a spring. Pressure adjusts from 5 to 100psi, which is a much wider range than an in-coil bag, so they carry more and level a heavier load.\u003c\/p\u003e\u003cp\u003eConstruction is two-ply fabric reinforced rubber with Zytel nylon end caps, and the kit includes an internal bump stop, valves, airline, fittings and mounting hardware.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuits 2 inch lift\u003c\/li\u003e\n\u003cli\u003eCradle kit ABC100 is required on lifted vehicles\u003c\/li\u003e\n\u003cli\u003eListed by Polyair for: Toyota HiLux Widebody Rogue \/ GR 2022 - 2025, 4WD\u003c\/li\u003e\n\u003cli\u003ePart number 88235R\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eToyota HiLux AN130, 2018 to 2025\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete airbag kit for one vehicle: two air springs, two valves, airline, fittings, mounting hardware and instructions.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Polyair warranty applies.\u003c\/p\u003e","brand":"Polyair","offers":[{"title":"Default Title","offer_id":50559715803215,"sku":"88235R","price":960.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/HILUX-GR_MAIN_023fc35f-968e-464b-9fa4-61d154966440.jpg?v=1790568034"},{"product_id":"polyair-88235","title":"Polyair Bellows Airbag Kit - Toyota HiLux Widebody Rogue \/ GR (0 to 1 inch lift)","description":"\u003cp\u003ePolyair Bellows Airbag Kit for the Toyota HiLux Widebody Rogue \/ GR (0 to 1 inch lift).\u003c\/p\u003e\u003ch3\u003eAbout the Polyair Bellows\u003c\/h3\u003e\u003cp\u003eBellows are Polyair's airbag for leaf sprung vehicles, mounting between the chassis and the axle rather than inside a spring. Pressure adjusts from 5 to 100psi, which is a much wider range than an in-coil bag, so they carry more and level a heavier load.\u003c\/p\u003e\u003cp\u003eConstruction is two-ply fabric reinforced rubber with Zytel nylon end caps, and the kit includes an internal bump stop, valves, airline, fittings and mounting hardware.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuits 0 to 1 inch lift\u003c\/li\u003e\n\u003cli\u003eCradle kit ABC100 is required on lifted vehicles\u003c\/li\u003e\n\u003cli\u003eStandard Height\u003c\/li\u003e\n\u003cli\u003eListed by Polyair for: Toyota HiLux Widebody Rogue \/ GR 2022 - 2025, 4WD\u003c\/li\u003e\n\u003cli\u003ePart number 88235\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eToyota HiLux AN130, 2018 to 2025\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete airbag kit for one vehicle: two air springs, two valves, airline, fittings, mounting hardware and instructions.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Polyair warranty applies.\u003c\/p\u003e","brand":"Polyair","offers":[{"title":"Default Title","offer_id":50559715868751,"sku":"88235","price":960.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/HILUX-GR_MAIN_9f4b080c-4741-4541-809e-0ea201a39fe5.jpg?v=1790568037"},{"product_id":"polyair-88233-2","title":"Polyair Bellows Airbag Kit - Toyota HiLux, Toyota HiLux N90 (0 to 1 inch lift)","description":"\u003cp\u003ePolyair Bellows Airbag Kit for the Toyota HiLux, Toyota HiLux N90 (0 to 1 inch lift).\u003c\/p\u003e\u003ch3\u003eAbout the Polyair Bellows\u003c\/h3\u003e\u003cp\u003eBellows are Polyair's airbag for leaf sprung vehicles, mounting between the chassis and the axle rather than inside a spring. Pressure adjusts from 5 to 100psi, which is a much wider range than an in-coil bag, so they carry more and level a heavier load.\u003c\/p\u003e\u003cp\u003eConstruction is two-ply fabric reinforced rubber with Zytel nylon end caps, and the kit includes an internal bump stop, valves, airline, fittings and mounting hardware.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuits 0 to 1 inch lift\u003c\/li\u003e\n\u003cli\u003eCradle kit ABC100 is required on lifted vehicles\u003c\/li\u003e\n\u003cli\u003eListed by Polyair for: Toyota HiLux, 4WD (\u0026amp; 2WD HI-RIDE); Toyota HiLux N90 12\/2025 +, 4WD (\u0026amp; 2WD HI-RIDE)\u003c\/li\u003e\n\u003cli\u003ePart number 88233-2\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eToyota HiLux AN120, 2015 to 2025\u003c\/li\u003e\n\u003cli\u003eToyota HiLux AN130, 2015 to 2025\u003c\/li\u003e\n\u003cli\u003eToyota HiLux AN220, 2025 to current\u003c\/li\u003e\n\u003cli\u003eToyota HiLux AN230, 2025 to current\u003c\/li\u003e\n\u003cli\u003eToyota HiLux XPN225, 2026 to current\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete airbag kit for one vehicle: two air springs, two valves, airline, fittings, mounting hardware and instructions.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Polyair warranty applies.\u003c\/p\u003e","brand":"Polyair","offers":[{"title":"Default Title","offer_id":50559716687951,"sku":"88233-2","price":960.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/360_F_504289605_zehJiK0tCuZLP2MdfFBpcJdOVxKLnXg1_0592a00c-d663-45a1-8685-c529f478621d.jpg?v=1790568039"},{"product_id":"polyair-88233-2r","title":"Polyair Bellows Airbag Kit - Toyota HiLux, Toyota HiLux N90 (2 inch lift)","description":"\u003cp\u003ePolyair Bellows Airbag Kit for the Toyota HiLux, Toyota HiLux N90 (2 inch lift).\u003c\/p\u003e\u003ch3\u003eAbout the Polyair Bellows\u003c\/h3\u003e\u003cp\u003eBellows are Polyair's airbag for leaf sprung vehicles, mounting between the chassis and the axle rather than inside a spring. Pressure adjusts from 5 to 100psi, which is a much wider range than an in-coil bag, so they carry more and level a heavier load.\u003c\/p\u003e\u003cp\u003eConstruction is two-ply fabric reinforced rubber with Zytel nylon end caps, and the kit includes an internal bump stop, valves, airline, fittings and mounting hardware.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuits 2 inch lift\u003c\/li\u003e\n\u003cli\u003eCradle kit ABC100 is required on lifted vehicles\u003c\/li\u003e\n\u003cli\u003eListed by Polyair for: Toyota HiLux, 4WD (\u0026amp; 2WD HI-RIDE); Toyota HiLux N90 12\/2025 +, 4WD (\u0026amp; 2WD HI-RIDE)\u003c\/li\u003e\n\u003cli\u003ePart number 88233-2R\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eToyota HiLux AN120, 2015 to 2025\u003c\/li\u003e\n\u003cli\u003eToyota HiLux AN130, 2015 to 2025\u003c\/li\u003e\n\u003cli\u003eToyota HiLux AN220, 2025 to current\u003c\/li\u003e\n\u003cli\u003eToyota HiLux AN230, 2025 to current\u003c\/li\u003e\n\u003cli\u003eToyota HiLux XPN225, 2026 to current\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete airbag kit for one vehicle: two air springs, two valves, airline, fittings, mounting hardware and instructions.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Polyair warranty applies.\u003c\/p\u003e","brand":"Polyair","offers":[{"title":"Default Title","offer_id":50559716851791,"sku":"88233-2R","price":960.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/360_F_504289605_zehJiK0tCuZLP2MdfFBpcJdOVxKLnXg1_47042d8c-44ae-4a41-90e4-62fd997ca4cf.jpg?v=1790568041"}],"url":"https:\/\/www.heasmans.com.au\/collections\/toyota-hilux-2015.oembed","provider":"Heasmans","version":"1.0","type":"link"}