{"title":"Toyota GR Corolla","description":"\u003cp\u003eIntakes and cooling for the Toyota GR Corolla from CSF, Eventuri and AWE Tuning. Fitted at Sydenham or shipped Australia wide.\u003c\/p\u003e","products":[{"product_id":"handr-sport-springs-for-toyota-gr-corolla","title":"H\u0026R Sport Springs - Toyota Gr Corolla","description":"\u003cp\u003eH\u0026amp;R Sport Springs for the Toyota Gr Corolla, lowering 30mm front.\u003c\/p\u003e\u003ch3\u003eAbout the H\u0026amp;R Sport Springs\u003c\/h3\u003e\u003cp\u003eH\u0026amp;R Sport Springs lower the car to close the gap between the tyre and the guard, and firm up the rate so the body settles more quickly. The progressive rate means the spring stays comfortable over normal road use and only stiffens as it compresses, which is what keeps a lowered car liveable day to day.\u003c\/p\u003e\u003cp\u003eThey work with the factory dampers and use the standard mounting points, so nothing else has to change. The drop for this vehicle is listed in the specification.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLowering: 30mm front\u003c\/li\u003e\n\u003cli\u003eLowering: 25mm rear\u003c\/li\u003e\n\u003cli\u003eProgressive spring rate\u003c\/li\u003e\n\u003cli\u003eHardened and tempered spring steel\u003c\/li\u003e\n\u003cli\u003eWorks with the factory dampers\u003c\/li\u003e\n\u003cli\u003ePart number WC54624\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eToyota GR Corolla E210 Hatchback, 2023 to current\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH\u0026amp;R Sport Springs\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eProfessional fitting and a wheel alignment are recommended after installation.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. H\u0026amp;R warranty applies.\u003c\/p\u003e","brand":"H\u0026R Suspension","offers":[{"title":"Default Title","offer_id":45855546310735,"sku":"WC54624","price":682.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/54624.jpg?v=1781680179"},{"product_id":"eventuri-toyota-gr-corolla-gloss-carbon-intake-eve-gr4cr-cf-int","title":"Eventuri Intake System - Toyota GR Corolla (Carbon, gloss)","description":"\u003cp\u003eEventuri Intake System for the Toyota GR Corolla, carbon, gloss.\u003c\/p\u003e\u003ch3\u003eAbout Eventuri intake systems\u003c\/h3\u003e\u003cp\u003eEventuri build intake systems around the Venturi principle: the filter sits in a carbon housing that narrows smoothly into the intake tube, so the air accelerates without hitting a step, a corner or a rubber join. That smoothness is what separates their systems from a cone filter on a pipe.\u003c\/p\u003e\u003cp\u003eThe housings are pre-preg carbon, which insulates the intake air from engine bay heat, and the systems are sealed and fed by ducts or a scoop so the engine draws cool air rather than hot air off the radiator.\u003c\/p\u003e\u003cp\u003eShown in both Gloss and Matte finishes.\u003c\/p\u003e\u003cp\u003e\\n*Images show our optional carbon engine cover.\u003c\/p\u003e\u003cp\u003eThe GR Corolla Intake follows on from our GR Yaris system which was developed through extensive data logging of temperatures, flow rates and dyno testing. Since this is a turbocharged engine, heat and volume were the main considerations during development. This intake system has been developed to offer the highest possible flow rate whilst maintaining the lowest intake temperatures possible. Each component has been designed to provide the turbo with a smooth and free flowing path. By ensuring a sealed system we have improved on the IAT's of the OEM airbox whilst at the same time increasing the internal volume to reduce the pressure drop and therefore reduce pumping losses of the turbo. In doing so the turbo is able to operate more efficiently and therefore reaches peak boost sooner to produce a net performance gain.\u003c\/p\u003e\u003cp\u003eThe filter itself has an outer diameter of 210mm or 8.3\" with a filtration surface area of over 130,000mm^2. The patented Venturi housing has been designed to provide the maximum internal volume possible for the GR Corolla and provides laminar flow to the turbo tube.\u003c\/p\u003e\u003cp\u003eThe Eventuri Difference\u003c\/p\u003e\u003cp\u003eThe GR Corolla Eventuri system uses our Patented Carbon fiber Housing which provides an aerodynamically efficient airflow path from the filter to the turbo. Not just another cone filter with a heat shield but a unique design which invokes the Venturi affect and maintains laminar flow conditions to reduce the drag on the turbo.\u003c\/p\u003e\u003cp\u003eOur GR Corolla intake has been independently tested by various reputable tuners. The first dyno chart is from Limit1 in the US. Several runs were done with the OEM airbox to get a repeatable result and then again with the Eventuri intake. Tests were done on the same day back to back. Results show an increase in torque and power across the entire RPM range - not just at the peak RPM, which is why the car feels more responsive and is able to accelerate faster through the gears.\u003c\/p\u003e\u003cp\u003eThe second set of results are from Paragon Performance also in the US who tested the intake against the stock airbox on the same day using 91 octane fuel. The systems were tested several times on a dyno jet in both configurations to get a repeatable result. In this instance the addition of the intake hits the load limit and the ECU closes the throttle to bring the load back down after 6600 rpm. This only happened on the dyno and not on the road. All dyno runs were done with stock ECU software.\u003c\/p\u003e\u003cp\u003eIntake Air TemperatureSince our intake system does not take air from the engine bay area unlike the stock airbox, the intake air temperatures are also lower which in part explains some of the performance gains shown above. The logs below show the temperatures at the intake and also at the after the intercooler. As can be seen, there is a measurable difference in temperatures at both locations. This again goes to show that the intercooler will only cool down the air by a proportional amount and the temperature of the air going into the intercooler will affect the temperature coming out of the intercooler.\u003c\/p\u003e\u003cp\u003eThe Eventuri GR Corolla intake system consists of a number of components engineered to perform a specific purpose and fabricated to the highest of standards. We use 100% pre-preg carbon fiber with no fibreglass which means we can achieve a smooth internal surface to maintain smoother airflow. Here are the details for each component and the design ethos behind them:\u003c\/p\u003e\u003cp\u003eThe filter housing comprises of our bespoke generation 2 filter, aluminium inlet cowl, stainless steel bracket and the integrated MAF section. The carbon pod shrouds the reverse mounted filter and smoothly shapes the airflow down to the MAF section which then connects to the rear inlet tube. This changes the flow path from the OEM airbox where airflow enters the front of the airbox, changes direction by 90 degrees to travel through the panel filter and then changes direction again by 90 degrees to move through the MAF section. Our system is a lot more direct with airflow entering the front of the filter housing and and moving into the MAF section without any abrupt direction changes. The result is a smoother path from the filter to the turbo inlet tube and therefore the turbo is able to function with less drag.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBespoke Cone Filter\u003c\/strong\u003e In order to achieve the highest flow rate possible we used our largest filter which has an outside diameter of 210mm or 8.3\" and when flow tested with a housing using a 4\" opening is able to flow up to 940 CFM at 28\" H2O. The filter medium is ISO tested to ensure that filtration is in line with OEM standards and is also dry. The filter is constructed with our signature flow cones to aid in the Venturi housing principle.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFinish and options: carbon, gloss\u003c\/li\u003e\n\u003cli\u003ePre-preg carbon fibre construction\u003c\/li\u003e\n\u003cli\u003eSealed housing with a bespoke high flow filter\u003c\/li\u003e\n\u003cli\u003eAlso available as EVE-GR4CR-CFM-INT: Toyota GR Corolla Intake Matte Carbon\u003c\/li\u003e\n\u003cli\u003eFinish: Gloss\u003c\/li\u003e\n\u003cli\u003eListed by Eventuri for: Toyota GR Corolla (E210) Hatchback GTS 2023-current; Toyota GR Corolla (E210) Hatchback Morizo 2023-current\u003c\/li\u003e\n\u003cli\u003ePart number EVE-GR4CR-CF-INT\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eToyota GR, 2023 to current\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCarbon Fiber Patented Venturi Filter Housing with integrated MAF section\u003c\/li\u003e\n\u003cli\u003eBespoke High Flow Dry Cone Filter\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber Inlet Duct\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber Rear Tube\u003c\/li\u003e\n\u003cli\u003eLaser Cut Front Air Scoop\u003c\/li\u003e\n\u003cli\u003eCustom Made Hardware\u003c\/li\u003e\n\u003cli\u003eLaser Cut Stainless Steel Brackets\u003c\/li\u003e\n\u003cli\u003eCustom EPDM Hose\u003c\/li\u003e\n\u003cli\u003eCNC Machined MAF Boss and Bracket Mounts\u003c\/li\u003e\n\u003cli\u003eFILTER HOUSING ASSEMBLY\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Eventuri warranty applies.\u003c\/p\u003e","brand":"Eventuri","offers":[{"title":"Default Title","offer_id":46846350000207,"sku":"EVE-GR4CR-CF-INT","price":3359.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/EVE-0013080.jpg?v=1789958560"},{"product_id":"eventuri-toyota-gr-corolla-matte-carbon-intake-eve-gr4cr-cfm-int","title":"Eventuri Intake System - Toyota GR Corolla (Carbon, matte)","description":"\u003cp\u003eEventuri Intake System for the Toyota GR Corolla, carbon, matte.\u003c\/p\u003e\u003ch3\u003eAbout Eventuri intake systems\u003c\/h3\u003e\u003cp\u003eEventuri build intake systems around the Venturi principle: the filter sits in a carbon housing that narrows smoothly into the intake tube, so the air accelerates without hitting a step, a corner or a rubber join. That smoothness is what separates their systems from a cone filter on a pipe.\u003c\/p\u003e\u003cp\u003eThe housings are pre-preg carbon, which insulates the intake air from engine bay heat, and the systems are sealed and fed by ducts or a scoop so the engine draws cool air rather than hot air off the radiator.\u003c\/p\u003e\u003cp\u003eShown in both Gloss and Matte finishes.\u003c\/p\u003e\u003cp\u003e\\n*Images show our optional carbon engine cover.\u003c\/p\u003e\u003cp\u003eThe GR Corolla Intake follows on from our GR Yaris system which was developed through extensive data logging of temperatures, flow rates and dyno testing. Since this is a turbocharged engine, heat and volume were the main considerations during development. This intake system has been developed to offer the highest possible flow rate whilst maintaining the lowest intake temperatures possible. Each component has been designed to provide the turbo with a smooth and free flowing path. By ensuring a sealed system we have improved on the IAT's of the OEM airbox whilst at the same time increasing the internal volume to reduce the pressure drop and therefore reduce pumping losses of the turbo. In doing so the turbo is able to operate more efficiently and therefore reaches peak boost sooner to produce a net performance gain.\u003c\/p\u003e\u003cp\u003eThe filter itself has an outer diameter of 210mm or 8.3\" with a filtration surface area of over 130,000mm^2. The patented Venturi housing has been designed to provide the maximum internal volume possible for the GR Corolla and provides laminar flow to the turbo tube.\u003c\/p\u003e\u003cp\u003eThe Eventuri Difference\u003c\/p\u003e\u003cp\u003eThe GR Corolla Eventuri system uses our Patented Carbon fiber Housing which provides an aerodynamically efficient airflow path from the filter to the turbo. Not just another cone filter with a heat shield but a unique design which invokes the Venturi affect and maintains laminar flow conditions to reduce the drag on the turbo.\u003c\/p\u003e\u003cp\u003eOur GR Corolla intake has been independently tested by various reputable tuners. The first dyno chart is from Limit1 in the US. Several runs were done with the OEM airbox to get a repeatable result and then again with the Eventuri intake. Tests were done on the same day back to back. Results show an increase in torque and power across the entire RPM range - not just at the peak RPM, which is why the car feels more responsive and is able to accelerate faster through the gears.\u003c\/p\u003e\u003cp\u003eThe second set of results are from Paragon Performance also in the US who tested the intake against the stock airbox on the same day using 91 octane fuel. The systems were tested several times on a dyno jet in both configurations to get a repeatable result. In this instance the addition of the intake hits the load limit and the ECU closes the throttle to bring the load back down after 6600 rpm. This only happened on the dyno and not on the road. All dyno runs were done with stock ECU software.\u003c\/p\u003e\u003cp\u003eIntake Air TemperatureSince our intake system does not take air from the engine bay area unlike the stock airbox, the intake air temperatures are also lower which in part explains some of the performance gains shown above. The logs below show the temperatures at the intake and also at the after the intercooler. As can be seen, there is a measurable difference in temperatures at both locations. This again goes to show that the intercooler will only cool down the air by a proportional amount and the temperature of the air going into the intercooler will affect the temperature coming out of the intercooler.\u003c\/p\u003e\u003cp\u003eThe Eventuri GR Corolla intake system consists of a number of components engineered to perform a specific purpose and fabricated to the highest of standards. We use 100% pre-preg carbon fiber with no fibreglass which means we can achieve a smooth internal surface to maintain smoother airflow. Here are the details for each component and the design ethos behind them:\u003c\/p\u003e\u003cp\u003eThe filter housing comprises of our bespoke generation 2 filter, aluminium inlet cowl, stainless steel bracket and the integrated MAF section. The carbon pod shrouds the reverse mounted filter and smoothly shapes the airflow down to the MAF section which then connects to the rear inlet tube. This changes the flow path from the OEM airbox where airflow enters the front of the airbox, changes direction by 90 degrees to travel through the panel filter and then changes direction again by 90 degrees to move through the MAF section. Our system is a lot more direct with airflow entering the front of the filter housing and and moving into the MAF section without any abrupt direction changes. The result is a smoother path from the filter to the turbo inlet tube and therefore the turbo is able to function with less drag.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBespoke Cone Filter\u003c\/strong\u003e In order to achieve the highest flow rate possible we used our largest filter which has an outside diameter of 210mm or 8.3\" and when flow tested with a housing using a 4\" opening is able to flow up to 940 CFM at 28\" H2O. The filter medium is ISO tested to ensure that filtration is in line with OEM standards and is also dry. The filter is constructed with our signature flow cones to aid in the Venturi housing principle.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFinish and options: carbon, matte\u003c\/li\u003e\n\u003cli\u003ePre-preg carbon fibre construction\u003c\/li\u003e\n\u003cli\u003eSealed housing with a bespoke high flow filter\u003c\/li\u003e\n\u003cli\u003eAlso available as EVE-GR4CR-CF-INT: Toyota GR Corolla Intake Gloss Carbon\u003c\/li\u003e\n\u003cli\u003eFinish: Matte\u003c\/li\u003e\n\u003cli\u003eListed by Eventuri for: Toyota GR Corolla (E210) Hatchback GTS 2023-current; Toyota GR Corolla (E210) Hatchback Morizo 2023-current\u003c\/li\u003e\n\u003cli\u003ePart number EVE-GR4CR-CFM-INT\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eToyota GR, 2023 to current\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCarbon Fiber Patented Venturi Filter Housing with integrated MAF section\u003c\/li\u003e\n\u003cli\u003eBespoke High Flow Dry Cone Filter\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber Inlet Duct\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber Rear Tube\u003c\/li\u003e\n\u003cli\u003eLaser Cut Front Air Scoop\u003c\/li\u003e\n\u003cli\u003eCustom Made Hardware\u003c\/li\u003e\n\u003cli\u003eLaser Cut Stainless Steel Brackets\u003c\/li\u003e\n\u003cli\u003eCustom EPDM Hose\u003c\/li\u003e\n\u003cli\u003eCNC Machined MAF Boss and Bracket Mounts\u003c\/li\u003e\n\u003cli\u003eFILTER HOUSING ASSEMBLY\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Eventuri warranty applies.\u003c\/p\u003e","brand":"Eventuri","offers":[{"title":"Default Title","offer_id":46846350131279,"sku":"EVE-GR4CR-CFM-INT","price":3359.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/EVE-0013081.jpg?v=1789958562"},{"product_id":"2660-15316-awe-s-flo-carbon-intake-for-the-toyota-gr-corolla","title":"AWE S-FLO Carbon Intake for the Toyota GR Corolla","description":"\u003cp\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eToyota GR Corolla (E210) Hatchback GTS 2023-current\u003cbr\u003eToyota GR Corolla (E210) Hatchback Morizo 2023-current\u003c\/p\u003e\u003cp\u003e\u003cem\u003eProfessional fitting is recommended.\u003c\/em\u003e\u003c\/p\u003e","brand":"AWE","offers":[{"title":"Default Title","offer_id":46874446790735,"sku":"2660-15316","price":2679.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/AWE-0029179.webp?v=1790054334"},{"product_id":"8285x-csf-toyota-gr-corolla-high-performance-stepped-core-intercooler","title":"CSF Intercooler - Toyota GR Corolla Stepped Core","description":"\u003cp\u003eCSF Intercooler for the Toyota GR Corolla Stepped Core.\u003c\/p\u003e\u003ch3\u003eAbout CSF intercoolers\u003c\/h3\u003e\u003cp\u003eA CSF intercooler cools the charge air after the turbo, and cooler charge air means denser air and less heat soaked into the inlet. CSF build theirs in aluminium with a bar and plate or tube and fin core depending on the application, sized to the car rather than oversized for the look of it.\u003c\/p\u003e\u003cp\u003eThey fit in the factory location and use the original mounting points, so nothing has to be cut.\u003c\/p\u003e\u003cp\u003eThe GR Corolla is the hottest hot hatch on the market right now. Its 1.6L three-cylinder turbo motor shared with the GR Yaris is an engineering marvel and offers plenty of room for growth. Pairing that with the all-wheel-drive system, great suspension, and stiff chassis, you have one serious competitor.\u003c\/p\u003e\u003cp\u003eThe GR Corolla quickly took the tuning world by storm with aftermarket companies eager to support it. With tuning being readily available due to previous development on GR Yaris, there was a huge demand for a performance intercooler right from the get go. CSF teamed up with Jackson Racing to offer the most advanced and efficient intercooler on the market. Moto IQ recently conducted their independent testing on the intercooler and said it was “The BEST Performing Intercooler We’ve Ever Tested”.\u003c\/p\u003e\u003cp\u003eToyota GR Corolla (E210) Hatchback GTS 2023-currentToyota GR Corolla (E210) Hatchback Morizo 2023-currentToyota GR Yaris (XP210) Hatchback GT 2020-2024Toyota GR Yaris (XP210) Hatchback GT 2024-currentToyota GR Yaris (XP210) Hatchback GTS 2020-2024Toyota GR Yaris (XP210) Hatchback GTS 2024-currentToyota GR Yaris (XP210) Hatchback Rallye 2020-2024\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2023+ Toyota GR Corolla\u003c\/li\u003e\n\u003cli\u003e2020+ Toyota GR Yaris\u003c\/li\u003e\n\u003cli\u003eOffered in 2 versions, listed as options on this page\u003c\/li\u003e\n\u003cli\u003ePart number 8285\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eToyota GR, 2020 to current\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne intercooler, as described above.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePlease confirm fitment with us before ordering.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. CSF warranty applies.\u003c\/p\u003e","brand":"CSF","offers":[{"title":"Raw","offer_id":46874471333967,"sku":"8285","price":1849.0,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":46874471366735,"sku":"8285B","price":1849.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/8285B_0_0b5b5862-94b2-4356-82c5-8966f6215015.jpg?v=1790055409"},{"product_id":"7233-csf-high-performance-radiator-for-toyota-gr-corolla-and-gr-yaris","title":"CSF Radiator - Toyota GR Corolla \u0026 GR Yaris","description":"\u003cp\u003eCSF Radiator for the Toyota GR Corolla \u0026amp; GR Yaris.\u003c\/p\u003e\u003ch3\u003eAbout CSF radiators\u003c\/h3\u003e\u003cp\u003eCSF build all-aluminium radiators that drop into the factory location and accept the original hoses, brackets, shroud and condenser, so the extra cooling comes without fabrication.\u003c\/p\u003e\u003cp\u003eThe gain comes from the core rather than from size alone: a dual row design with CSF's B-Tube construction and a high density louvred fin, which puts more surface area in front of the same airflow. On a car that climbs in temperature under load, towing or on track, that is what holds it steady.\u003c\/p\u003e\u003cp\u003eToyota GR Corolla (E210) Hatchback GTS 2023-currentToyota GR Corolla (E210) Hatchback Morizo 2023-currentToyota GR Yaris (XP210) Hatchback GT 2020-2024Toyota GR Yaris (XP210) Hatchback GT 2024-currentToyota GR Yaris (XP210) Hatchback GTS 2020-2024Toyota GR Yaris (XP210) Hatchback GTS 2024-currentToyota GR Yaris (XP210) Hatchback Rallye 2020-2024\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2-Row, 42mm Ultra-High-Performance Core\u003c\/li\u003e\n\u003cli\u003eCooling Tubes with CSF’s Exclusive B-Tube Technology\u003c\/li\u003e\n\u003cli\u003eNew 5mm Tall Ultra Efficient Fins with a Multi-Louvered Design for Maximum Surface Area Contact\u003c\/li\u003e\n\u003cli\u003eCNC Machined Mounting Brackets and OEM Style Inlet\/Outlet\u003c\/li\u003e\n\u003cli\u003ePre-plugged 1\/8th NPT temperature sensor port on right side tank\u003c\/li\u003e\n\u003cli\u003ePre-installed foam strips on top and bottom end plates for increased sealing\u003c\/li\u003e\n\u003cli\u003e100% All Aluminium TIG-Welded Construction\u003c\/li\u003e\n\u003cli\u003eHand Brushed Satin Finish\u003c\/li\u003e\n\u003cli\u003eTrue Plug-and-Play “Drop-in Fit” Installation Requires Absolutely No Modifications\u003c\/li\u003e\n\u003cli\u003eIndividually Leak and Pressure Tested\u003c\/li\u003e\n\u003cli\u003e2-Year Limited Warranty\u003c\/li\u003e\n\u003cli\u003e2023+ Toyota GR Corolla\u003c\/li\u003e\n\u003cli\u003e2020+ Toyota GR Yaris\u003c\/li\u003e\n\u003cli\u003ePart number 7233\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eToyota GR, 2020 to current\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne radiator, as described above.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePlease confirm fitment with us before ordering.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. CSF warranty applies.\u003c\/p\u003e","brand":"CSF","offers":[{"title":"Default Title","offer_id":46874477723727,"sku":"7233","price":1639.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/CSF-0020637.png?v=1790055473"}],"url":"https:\/\/www.heasmans.com.au\/collections\/toyota-gr-corolla.oembed","provider":"Heasmans","version":"1.0","type":"link"}