{"title":"Tesla Model 3","description":"\u003cp\u003eSuspension and brakes for the Tesla Model 3 from KW, Girodisc and ST Suspensions. Fitted at Sydenham or shipped Australia wide.\u003c\/p\u003e","products":[{"product_id":"handr-height-adjustable-springs-for-tesla-model-3","title":"H\u0026R VSS Height Adjustable Springs - Tesla Model 3 (4WD) [23038-1-3]","description":"\u003cp\u003eH\u0026amp;R VSS Height Adjustable Springs for the Tesla Model 3 (4WD), adjustable 35-45mm front, 35-50mm rear.\u003c\/p\u003e\u003ch3\u003eAbout the H\u0026amp;R VSS Height Adjustable Springs\u003c\/h3\u003e\u003cp\u003eThe VSS system is a spring kit with an adjustable perch, so the ride height can be set anywhere within a range rather than fixed at one drop. The car keeps its factory dampers, and on cars with electronic damping that system keeps working.\u003c\/p\u003e\u003cp\u003eThe adjustment range for this vehicle is listed in the specification. Where a car is offered with and without adaptive dampers, the range differs, and both are listed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour wheel drive\u003c\/li\u003e\n\u003cli\u003eNot for vehicles with adaptive dampers\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 35-45mm front, 35-50mm rear\u003c\/li\u003e\n\u003cli\u003eFor vehicles with adaptive dampers\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 25-35mm front, 30-40mm rear\u003c\/li\u003e\n\u003cli\u003eHeight adjustable spring perches\u003c\/li\u003e\n\u003cli\u003eKeeps the factory dampers and any electronic damper control\u003c\/li\u003e\n\u003cli\u003eHardened and tempered spring steel\u003c\/li\u003e\n\u003cli\u003ePart number 23038-1-3\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH\u0026amp;R VSS Height Adjustable Springs\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eProfessional fitting and a wheel alignment are recommended after installation.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. H\u0026amp;R warranty applies.\u003c\/p\u003e","brand":"H\u0026R Suspension","offers":[{"title":"Default Title","offer_id":45855328272463,"sku":"23038-1-3","price":1650.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/HR-Gewindefedern-Stdandardbilder-2-scaled.jpg?v=1781679839"},{"product_id":"handr-height-adjustable-springs-for-tesla-model-3-1","title":"H\u0026R VSS Height Adjustable Springs - Tesla Model 3 (4WD) [23038-1-2]","description":"\u003cp\u003eH\u0026amp;R VSS Height Adjustable Springs for the Tesla Model 3 (4WD), adjustable 35-45mm front, 35-50mm rear.\u003c\/p\u003e\u003ch3\u003eAbout the H\u0026amp;R VSS Height Adjustable Springs\u003c\/h3\u003e\u003cp\u003eThe VSS system is a spring kit with an adjustable perch, so the ride height can be set anywhere within a range rather than fixed at one drop. The car keeps its factory dampers, and on cars with electronic damping that system keeps working.\u003c\/p\u003e\u003cp\u003eThe adjustment range for this vehicle is listed in the specification. Where a car is offered with and without adaptive dampers, the range differs, and both are listed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour wheel drive\u003c\/li\u003e\n\u003cli\u003eNot for vehicles with adaptive dampers\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 35-45mm front, 35-50mm rear\u003c\/li\u003e\n\u003cli\u003eFor vehicles with adaptive dampers\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 25-35mm front, 30-40mm rear\u003c\/li\u003e\n\u003cli\u003eHeight adjustable spring perches\u003c\/li\u003e\n\u003cli\u003eKeeps the factory dampers and any electronic damper control\u003c\/li\u003e\n\u003cli\u003eHardened and tempered spring steel\u003c\/li\u003e\n\u003cli\u003ePart number 23038-1-2\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH\u0026amp;R VSS Height Adjustable Springs\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eProfessional fitting and a wheel alignment are recommended after installation.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. H\u0026amp;R warranty applies.\u003c\/p\u003e","brand":"H\u0026R Suspension","offers":[{"title":"Default Title","offer_id":45855330664527,"sku":"23038-1-2","price":1650.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/HR-Gewindefedern-Stdandardbilder-2-scaled_6f405acb-d60a-4bc7-bc32-bf21012b3861.jpg?v=1781679839"},{"product_id":"handr-height-adjustable-springs-for-tesla-model-3-2","title":"H\u0026R VSS Height Adjustable Springs - Tesla Model 3 (4WD) [23038-1]","description":"\u003cp\u003eH\u0026amp;R VSS Height Adjustable Springs for the Tesla Model 3 (4WD), adjustable 35-45mm front, 35-50mm rear.\u003c\/p\u003e\u003ch3\u003eAbout the H\u0026amp;R VSS Height Adjustable Springs\u003c\/h3\u003e\u003cp\u003eThe VSS system is a spring kit with an adjustable perch, so the ride height can be set anywhere within a range rather than fixed at one drop. The car keeps its factory dampers, and on cars with electronic damping that system keeps working.\u003c\/p\u003e\u003cp\u003eThe adjustment range for this vehicle is listed in the specification. Where a car is offered with and without adaptive dampers, the range differs, and both are listed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour wheel drive\u003c\/li\u003e\n\u003cli\u003eNot for vehicles with adaptive dampers\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 35-45mm front, 35-50mm rear\u003c\/li\u003e\n\u003cli\u003eFor vehicles with adaptive dampers\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 25-35mm front, 30-40mm rear\u003c\/li\u003e\n\u003cli\u003eHeight adjustable spring perches\u003c\/li\u003e\n\u003cli\u003eKeeps the factory dampers and any electronic damper control\u003c\/li\u003e\n\u003cli\u003eHardened and tempered spring steel\u003c\/li\u003e\n\u003cli\u003ePart number 23038-1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH\u0026amp;R VSS Height Adjustable Springs\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eProfessional fitting and a wheel alignment are recommended after installation.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. H\u0026amp;R warranty applies.\u003c\/p\u003e","brand":"H\u0026R Suspension","offers":[{"title":"Default Title","offer_id":45855331647567,"sku":"23038-1","price":1650.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/HR-Gewindefedern-Stdandardbilder-2-scaled_0a9888cf-9320-4e2e-a17b-157a3d52c7e0.jpg?v=1781679842"},{"product_id":"handr-coilover-kit-for-tesla-model-3","title":"H\u0026R Coilover Kit - Tesla Model 3","description":"\u003cp\u003eH\u0026amp;R Coilover Kit for the Tesla Model 3, adjustable 20-45mm front.\u003c\/p\u003e\u003ch3\u003eAbout the H\u0026amp;R Coilover Kit\u003c\/h3\u003e\u003cp\u003eAn H\u0026amp;R Coilover Kit replaces the spring and damper as one unit, with threaded bodies that let the ride height be set exactly where you want it. Damping is matched to the height range by H\u0026amp;R, and on some kits it is adjustable as well.\u003c\/p\u003e\u003cp\u003eKits are supplied for the front and rear of the car, with the perches and collars needed to set them up. The height range for this vehicle is listed in the specification.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour wheel drive\u003c\/li\u003e\n\u003cli\u003eNot for vehicles with Electronic Damping Control (EDC)\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 20-45mm front\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 25-50mm rear\u003c\/li\u003e\n\u003cli\u003eDamping adjustable\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant construction\u003c\/li\u003e\n\u003cli\u003eComplete bolt-in kit\u003c\/li\u003e\n\u003cli\u003ePart number 47659-1V\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFront and rear coilover units\u003c\/li\u003e\n\u003cli\u003eSpring perches and locking collars\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eSet-up and a wheel alignment by a qualified workshop are recommended after fitting.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. H\u0026amp;R warranty applies.\u003c\/p\u003e","brand":"H\u0026R Suspension","offers":[{"title":"Default Title","offer_id":45855336628303,"sku":"47659-1V","price":6820.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/47659-1V-3.jpg?v=1781679853"},{"product_id":"handr-sport-springs-for-tesla-model-3","title":"H\u0026R Sport Springs - Tesla Model 3 (4WD) (-30mm)","description":"\u003cp\u003eH\u0026amp;R Sport Springs for the Tesla Model 3 (4WD) (-30mm).\u003c\/p\u003e\u003ch3\u003eAbout the H\u0026amp;R Sport Springs\u003c\/h3\u003e\u003cp\u003eH\u0026amp;R Sport Springs lower the car to close the gap between the tyre and the guard, and firm up the rate so the body settles more quickly. The progressive rate means the spring stays comfortable over normal road use and only stiffens as it compresses, which is what keeps a lowered car liveable day to day.\u003c\/p\u003e\u003cp\u003eThey work with the factory dampers and use the standard mounting points, so nothing else has to change. The drop for this vehicle is listed in the specification.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour wheel drive\u003c\/li\u003e\n\u003cli\u003eProgressive spring rate\u003c\/li\u003e\n\u003cli\u003eHardened and tempered spring steel\u003c\/li\u003e\n\u003cli\u003eWorks with the factory dampers\u003c\/li\u003e\n\u003cli\u003ePart number 28659-1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH\u0026amp;R Sport Springs\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eProfessional fitting and a wheel alignment are recommended after installation.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. H\u0026amp;R warranty applies.\u003c\/p\u003e","brand":"H\u0026R Suspension","offers":[{"title":"Default Title","offer_id":45855548735567,"sku":"28659-1","price":792.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/Tieferlegungsfedersatz_05ebf9ac-45bf-475e-a880-3a9fcda263b1.jpg?v=1781680179"},{"product_id":"handr-sport-springs-for-tesla-model-3-1","title":"H\u0026R Sport Springs - Tesla Model 3 (2WD)","description":"\u003cp\u003eH\u0026amp;R Sport Springs for the Tesla Model 3 (2WD).\u003c\/p\u003e\u003ch3\u003eAbout the H\u0026amp;R Sport Springs\u003c\/h3\u003e\u003cp\u003eH\u0026amp;R Sport Springs lower the car to close the gap between the tyre and the guard, and firm up the rate so the body settles more quickly. The progressive rate means the spring stays comfortable over normal road use and only stiffens as it compresses, which is what keeps a lowered car liveable day to day.\u003c\/p\u003e\u003cp\u003eThey work with the factory dampers and use the standard mounting points, so nothing else has to change. The drop for this vehicle is listed in the specification.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo wheel drive\u003c\/li\u003e\n\u003cli\u003eProgressive spring rate\u003c\/li\u003e\n\u003cli\u003eHardened and tempered spring steel\u003c\/li\u003e\n\u003cli\u003eWorks with the factory dampers\u003c\/li\u003e\n\u003cli\u003ePart number 28659-2\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH\u0026amp;R Sport Springs\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eProfessional fitting and a wheel alignment are recommended after installation.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. H\u0026amp;R warranty applies.\u003c\/p\u003e","brand":"H\u0026R Suspension","offers":[{"title":"Default Title","offer_id":45855548833871,"sku":"28659-2","price":792.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/Tieferlegungsfedersatz_aca5c4f6-a881-4d72-882c-cb8054431457.jpg?v=1781680181"},{"product_id":"handr-sway-bar-for-tesla-model-3","title":"H\u0026R Sway Bar Kit - Tesla Model 3 (4WD) [33659-2-wc579]","description":"\u003cp\u003eH\u0026amp;R Sway Bar Kit for the Tesla Model 3 (4WD).\u003c\/p\u003e\u003ch3\u003eAbout the H\u0026amp;R Sway Bar Kit\u003c\/h3\u003e\u003cp\u003eAn H\u0026amp;R Sway Bar Kit stiffens the car in roll, so it stays flatter through a corner and settles sooner afterwards. Because a sway bar only works when the two wheels on an axle move differently, ride quality over bumps is largely unchanged.\u003c\/p\u003e\u003cp\u003eMost bars carry more than one mounting hole, which lets the rate be adjusted after fitting. The bar thickness and the number of positions for this vehicle are listed in the specification.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour wheel drive\u003c\/li\u003e\n\u003cli\u003e30mm front bar, 2 adjustment positions and 21mm rear bar, 2 adjustment positions\u003c\/li\u003e\n\u003cli\u003eDirect fit to the factory mounting points\u003c\/li\u003e\n\u003cli\u003ePart number 33659-2-wc579\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH\u0026amp;R Sway Bar Kit\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eProfessional fitting is recommended.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. H\u0026amp;R warranty applies.\u003c\/p\u003e","brand":"H\u0026R Suspension","offers":[{"title":"Default Title","offer_id":45855656902735,"sku":"33659-2-wc579","price":1298.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/Stabi_einzeln-1-scaled_2c993ee7-79e7-40ca-a38c-43f510fd487b.jpg?v=1781680335"},{"product_id":"handr-sway-bar-for-tesla-model-3-1","title":"H\u0026R Sway Bar Kit - Tesla Model 3 (4WD) [33659-2-wc578]","description":"\u003cp\u003eH\u0026amp;R Sway Bar Kit for the Tesla Model 3 (4WD).\u003c\/p\u003e\u003ch3\u003eAbout the H\u0026amp;R Sway Bar Kit\u003c\/h3\u003e\u003cp\u003eAn H\u0026amp;R Sway Bar Kit stiffens the car in roll, so it stays flatter through a corner and settles sooner afterwards. Because a sway bar only works when the two wheels on an axle move differently, ride quality over bumps is largely unchanged.\u003c\/p\u003e\u003cp\u003eMost bars carry more than one mounting hole, which lets the rate be adjusted after fitting. The bar thickness and the number of positions for this vehicle are listed in the specification.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour wheel drive\u003c\/li\u003e\n\u003cli\u003e30mm front bar, 2 adjustment positions and 21mm rear bar, 2 adjustment positions\u003c\/li\u003e\n\u003cli\u003eDirect fit to the factory mounting points\u003c\/li\u003e\n\u003cli\u003ePart number 33659-2-wc578\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH\u0026amp;R Sway Bar Kit\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eProfessional fitting is recommended.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. H\u0026amp;R warranty applies.\u003c\/p\u003e","brand":"H\u0026R Suspension","offers":[{"title":"Default Title","offer_id":45855656935503,"sku":"33659-2-wc578","price":1298.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/Stabi_einzeln-1-scaled_e5942cff-c8d5-46ab-b6ae-349c67b37fc9.jpg?v=1781680337"},{"product_id":"handr-sport-springs-for-tesla-model-3-2","title":"H\u0026R Sport Springs - Tesla Model 3 (4WD) (-45mm)","description":"\u003cp\u003eH\u0026amp;R Sport Springs for the Tesla Model 3 (4WD) (-45mm).\u003c\/p\u003e\u003ch3\u003eAbout the H\u0026amp;R Sport Springs\u003c\/h3\u003e\u003cp\u003eH\u0026amp;R Sport Springs lower the car to close the gap between the tyre and the guard, and firm up the rate so the body settles more quickly. The progressive rate means the spring stays comfortable over normal road use and only stiffens as it compresses, which is what keeps a lowered car liveable day to day.\u003c\/p\u003e\u003cp\u003eThey work with the factory dampers and use the standard mounting points, so nothing else has to change. The drop for this vehicle is listed in the specification.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour wheel drive\u003c\/li\u003e\n\u003cli\u003eProgressive spring rate\u003c\/li\u003e\n\u003cli\u003eHardened and tempered spring steel\u003c\/li\u003e\n\u003cli\u003eWorks with the factory dampers\u003c\/li\u003e\n\u003cli\u003ePart number 28659-1-wc577\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH\u0026amp;R Sport Springs\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eProfessional fitting and a wheel alignment are recommended after installation.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. H\u0026amp;R warranty applies.\u003c\/p\u003e","brand":"H\u0026R Suspension","offers":[{"title":"Default Title","offer_id":45855720472655,"sku":"28659-1-wc577","price":792.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/Hoherlegungsfedersatz-1_2c75cf6f-361f-4113-98ec-c28962a42571.jpg?v=1781680427"},{"product_id":"handr-sport-springs-for-tesla-model-3-3","title":"H\u0026R Sport Springs - Tesla Model 3 (4WD) (-25mm)","description":"\u003cp\u003eH\u0026amp;R Sport Springs for the Tesla Model 3 (4WD) (-25mm).\u003c\/p\u003e\u003ch3\u003eAbout the H\u0026amp;R Sport Springs\u003c\/h3\u003e\u003cp\u003eH\u0026amp;R Sport Springs lower the car to close the gap between the tyre and the guard, and firm up the rate so the body settles more quickly. The progressive rate means the spring stays comfortable over normal road use and only stiffens as it compresses, which is what keeps a lowered car liveable day to day.\u003c\/p\u003e\u003cp\u003eThey work with the factory dampers and use the standard mounting points, so nothing else has to change. The drop for this vehicle is listed in the specification.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour wheel drive\u003c\/li\u003e\n\u003cli\u003eProgressive spring rate\u003c\/li\u003e\n\u003cli\u003eHardened and tempered spring steel\u003c\/li\u003e\n\u003cli\u003eWorks with the factory dampers\u003c\/li\u003e\n\u003cli\u003ePart number 94174-wc576\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH\u0026amp;R Sport Springs\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eProfessional fitting and a wheel alignment are recommended after installation.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. H\u0026amp;R warranty applies.\u003c\/p\u003e","brand":"H\u0026R Suspension","offers":[{"title":"Default Title","offer_id":45855831228495,"sku":"94174-wc576","price":682.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/Tieferlegungsfedersatz_387a36d4-1b21-4b0a-842c-0462c7ae0183.jpg?v=1781680580"},{"product_id":"handr-sport-springs-for-tesla-model-3-4","title":"H\u0026R Sport Springs - Tesla Model 3 (2WD) (-40mm) [28659-2-wc575]","description":"\u003cp\u003eH\u0026amp;R Sport Springs for the Tesla Model 3 (2WD) (-40mm), lowering 40mm front.\u003c\/p\u003e\u003ch3\u003eAbout the H\u0026amp;R Sport Springs\u003c\/h3\u003e\u003cp\u003eH\u0026amp;R Sport Springs lower the car to close the gap between the tyre and the guard, and firm up the rate so the body settles more quickly. The progressive rate means the spring stays comfortable over normal road use and only stiffens as it compresses, which is what keeps a lowered car liveable day to day.\u003c\/p\u003e\u003cp\u003eThey work with the factory dampers and use the standard mounting points, so nothing else has to change. The drop for this vehicle is listed in the specification.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo wheel drive\u003c\/li\u003e\n\u003cli\u003eLowering: 40mm front\u003c\/li\u003e\n\u003cli\u003eLowering: 35mm rear\u003c\/li\u003e\n\u003cli\u003eProgressive spring rate\u003c\/li\u003e\n\u003cli\u003eHardened and tempered spring steel\u003c\/li\u003e\n\u003cli\u003eWorks with the factory dampers\u003c\/li\u003e\n\u003cli\u003ePart number 28659-2-wc575\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH\u0026amp;R Sport Springs\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eProfessional fitting and a wheel alignment are recommended after installation.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. H\u0026amp;R warranty applies.\u003c\/p\u003e","brand":"H\u0026R Suspension","offers":[{"title":"Default Title","offer_id":45855833620559,"sku":"28659-2-wc575","price":792.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/Tieferlegungsfedersatz_c0dbf221-5155-4ca6-bbfa-e84512708068.jpg?v=1781680582"},{"product_id":"handr-sport-springs-for-tesla-model-3-5","title":"H\u0026R Sport Springs - Tesla Model 3 (4WD) (-35mm)","description":"\u003cp\u003eH\u0026amp;R Sport Springs for the Tesla Model 3 (4WD) (-35mm).\u003c\/p\u003e\u003ch3\u003eAbout the H\u0026amp;R Sport Springs\u003c\/h3\u003e\u003cp\u003eH\u0026amp;R Sport Springs lower the car to close the gap between the tyre and the guard, and firm up the rate so the body settles more quickly. The progressive rate means the spring stays comfortable over normal road use and only stiffens as it compresses, which is what keeps a lowered car liveable day to day.\u003c\/p\u003e\u003cp\u003eThey work with the factory dampers and use the standard mounting points, so nothing else has to change. The drop for this vehicle is listed in the specification.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour wheel drive\u003c\/li\u003e\n\u003cli\u003eProgressive spring rate\u003c\/li\u003e\n\u003cli\u003eHardened and tempered spring steel\u003c\/li\u003e\n\u003cli\u003eWorks with the factory dampers\u003c\/li\u003e\n\u003cli\u003ePart number 28659-1-wc574\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH\u0026amp;R Sport Springs\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eProfessional fitting and a wheel alignment are recommended after installation.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. H\u0026amp;R warranty applies.\u003c\/p\u003e","brand":"H\u0026R Suspension","offers":[{"title":"Default Title","offer_id":45855833653327,"sku":"28659-1-wc574","price":792.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/Tieferlegungsfedersatz_8ba94f6f-3f72-4e9a-8ae7-1fd3164e8a3f.jpg?v=1781680585"},{"product_id":"handr-sport-springs-for-tesla-model-3-6","title":"H\u0026R Sport Springs - Tesla Model 3 (2WD) (-40mm) [28659-2-wc573]","description":"\u003cp\u003eH\u0026amp;R Sport Springs for the Tesla Model 3 (2WD) (-40mm), lowering 40mm front.\u003c\/p\u003e\u003ch3\u003eAbout the H\u0026amp;R Sport Springs\u003c\/h3\u003e\u003cp\u003eH\u0026amp;R Sport Springs lower the car to close the gap between the tyre and the guard, and firm up the rate so the body settles more quickly. The progressive rate means the spring stays comfortable over normal road use and only stiffens as it compresses, which is what keeps a lowered car liveable day to day.\u003c\/p\u003e\u003cp\u003eThey work with the factory dampers and use the standard mounting points, so nothing else has to change. The drop for this vehicle is listed in the specification.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo wheel drive\u003c\/li\u003e\n\u003cli\u003eLowering: 40mm front\u003c\/li\u003e\n\u003cli\u003eLowering: 35mm rear\u003c\/li\u003e\n\u003cli\u003eProgressive spring rate\u003c\/li\u003e\n\u003cli\u003eHardened and tempered spring steel\u003c\/li\u003e\n\u003cli\u003eWorks with the factory dampers\u003c\/li\u003e\n\u003cli\u003ePart number 28659-2-wc573\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH\u0026amp;R Sport Springs\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eProfessional fitting and a wheel alignment are recommended after installation.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. H\u0026amp;R warranty applies.\u003c\/p\u003e","brand":"H\u0026R Suspension","offers":[{"title":"Default Title","offer_id":45855833686095,"sku":"28659-2-wc573","price":792.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/Tieferlegungsfedersatz_536ad89d-a9d2-41f9-bac6-c848de66a0ef.jpg?v=1781680587"},{"product_id":"handr-wheel-spacers-tesla-model-3","title":"H\u0026R Wheel Spacers - Tesla MODEL 3","description":"\u003cp\u003eH\u0026amp;R TRAK+ Wheel Spacers for the Tesla MODEL 3.\u003c\/p\u003e\u003ch3\u003eAbout the H\u0026amp;R TRAK+ Wheel Spacers\u003c\/h3\u003e\u003cp\u003eTRAK+ spacers push the wheels outward to widen the track and fill the guards. Each pair covers one axle, and the sizes are quoted per axle with the amount each side in brackets, so a 20mm spacer moves each wheel out 10mm.\u003c\/p\u003e\u003cp\u003eThey are hub centric, machined from forged aluminium, and supplied with the extended bolts sized to suit the spacer chosen. Running a different width front and rear is normal: add the front size, then add the rear size as a second item, and each pair arrives with the right bolts.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e28mm per axle (14mm per side), part 2865642MZ5, no extended bolts needed\u003c\/li\u003e\n\u003cli\u003e34mm per axle (17mm per side), part 3465642, no extended bolts needed\u003c\/li\u003e\n\u003cli\u003e40mm per axle (20mm per side), part 4065642, no extended bolts needed\u003c\/li\u003e\n\u003cli\u003eHub centric\u003c\/li\u003e\n\u003cli\u003eMachined from forged aluminium\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair, enough for one axle\u003c\/li\u003e\n\u003cli\u003eSilver or black anodised finish\u003c\/li\u003e\n\u003cli\u003ePart number 2865642MZ5\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 x H\u0026amp;R TRAK+ wheel spacers (one axle)\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThis spacer needs no extended bolts.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. H\u0026amp;R warranty applies.\u003c\/p\u003e","brand":"H\u0026R Suspension","offers":[{"title":"28mm per axle (14mm per side) \/ Silver","offer_id":46786250473551,"sku":"2865642MZ5","price":440.0,"currency_code":"AUD","in_stock":true},{"title":"28mm per axle (14mm per side) \/ Black","offer_id":46786250506319,"sku":"2865642MZ5-B","price":440.0,"currency_code":"AUD","in_stock":true},{"title":"34mm per axle (17mm per side) \/ Silver","offer_id":46786250539087,"sku":"3465642","price":440.0,"currency_code":"AUD","in_stock":true},{"title":"34mm per axle (17mm per side) \/ Black","offer_id":46786250571855,"sku":"3465642-B","price":440.0,"currency_code":"AUD","in_stock":true},{"title":"40mm per axle (20mm per side) \/ Silver","offer_id":46786250604623,"sku":"4065642","price":440.0,"currency_code":"AUD","in_stock":true},{"title":"40mm per axle (20mm per side) \/ Black","offer_id":46786250637391,"sku":"4065642-B","price":440.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/DRS-MZ-S_cb897c3a-5072-43b2-879e-c59c7dd51048.png?v=1789536758"},{"product_id":"bilstein-b6-rear-shock-absorber-for-tesla-model-3-2017-on-standard","title":"Bilstein B6 Rear Shock Absorber for Tesla Model 3 2017 on (Standard)","description":"\u003cp\u003eBilstein B6 rear shock absorber for the Tesla Model 3 2017 on, at standard ride height.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: rear\u003c\/li\u003e\n\u003cli\u003eSuits standard ride height\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003ePart number 24-626231\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber. Two are needed to do the rear of the vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811445919823,"sku":"24-626231","price":363.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/24-626231.jpg?v=1789780310"},{"product_id":"bilstein-b6-front-left-shock-absorber-for-tesla-model-3-2017-on-standard","title":"Bilstein B6 Front Left Shock Absorber for Tesla Model 3 2017 on (Standard)","description":"\u003cp\u003eBilstein B6 front left shock absorber for the Tesla Model 3 2017 on, at standard ride height.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: front\u003c\/li\u003e\n\u003cli\u003eSuits standard ride height\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003ePart number 22-326591\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber, for the front left of the vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811446050895,"sku":"22-326591","price":594.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/22-326591.jpg?v=1789780310"},{"product_id":"bilstein-b6-front-right-shock-absorber-for-tesla-model-3-2017-on-standard","title":"Bilstein B6 Front Right Shock Absorber for Tesla Model 3 2017 on (Standard)","description":"\u003cp\u003eBilstein B6 front right shock absorber for the Tesla Model 3 2017 on, at standard ride height.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: front\u003c\/li\u003e\n\u003cli\u003eSuits standard ride height\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003ePart number 22-342690\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber, for the front right of the vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811446083663,"sku":"22-342690","price":594.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/22-342690_3f024c91-85a3-4106-b7f0-ed68e8353390.jpg?v=1789780312"},{"product_id":"kw-coilover-kit-v3-for-06-2018-tesla-model-3-5yj3-35287007","title":"KW V3 Coilover Kit - Tesla Model 3 (5YJ3)","description":"\u003cp\u003eKW V3 Coilover Kit for the Tesla Model 3 (5YJ3).\u003c\/p\u003e\u003ch3\u003eAbout the KW V3\u003c\/h3\u003e\u003cp\u003eThe KW V3 is the adjustable coilover in the road range, with rebound and compression adjusted separately. Compression controls how the suspension takes the hit, rebound controls how it comes back, and separating the two is what lets a car be set up for a particular road, load or tyre.\u003c\/p\u003e\u003cp\u003eRide height is adjusted at the threaded strut body, and the damping adjustment is made by hand with click stops so a setting can be repeated. Struts are stainless steel.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eRebound and compression adjustable separately\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: 5YJ3 Professional fitting is recommended.\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Tesla Model 3 (5YJ3)\u003c\/li\u003e\n\u003cli\u003ePart number 35287007\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841873694799,"sku":"35287007","price":6289.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0004888.jpg?v=1789945766"},{"product_id":"kw-coilover-kit-v3-for-07-2017-tesla-model-3-5yj3-35287006","title":"KW V3 Coilover Kit - Tesla Model 3 (5YJ3), Tesla Model Y (5YJY) [35287006]","description":"\u003cp\u003eKW V3 Coilover Kit for the Tesla Model 3 (5YJ3), Tesla Model Y (5YJY).\u003c\/p\u003e\u003ch3\u003eAbout the KW V3\u003c\/h3\u003e\u003cp\u003eThe KW V3 is the adjustable coilover in the road range, with rebound and compression adjusted separately. Compression controls how the suspension takes the hit, rebound controls how it comes back, and separating the two is what lets a car be set up for a particular road, load or tyre.\u003c\/p\u003e\u003cp\u003eRide height is adjusted at the threaded strut body, and the damping adjustment is made by hand with click stops so a setting can be repeated. Struts are stainless steel.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eRebound and compression adjustable separately\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: EV, EV Rear-Wheel Drive, Long Range Rear-Wheel Drive\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Tesla Model 3 (5YJ3), Tesla Model Y (5YJY)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eDampers are adjusted by easily operating adjustment wheels. Rebound is only adjustable if the top of the piston rod is accessible. This will depend on the vehicle construction.\u003c\/li\u003e\n\u003cli\u003ePart number 35287006\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841873727567,"sku":"35287006","price":4796.55,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0004887.jpg?v=1789945766"},{"product_id":"kw-coilover-kit-v3-for-tesla-model-y-5yjy-35287010","title":"KW V3 Coilover Kit - Tesla Model 3 (5YJ3), Tesla Model Y (5YJY) [35287010]","description":"\u003cp\u003eKW V3 Coilover Kit for the Tesla Model 3 (5YJ3), Tesla Model Y (5YJY).\u003c\/p\u003e\u003ch3\u003eAbout the KW V3\u003c\/h3\u003e\u003cp\u003eThe KW V3 is the adjustable coilover in the road range, with rebound and compression adjusted separately. Compression controls how the suspension takes the hit, rebound controls how it comes back, and separating the two is what lets a car be set up for a particular road, load or tyre.\u003c\/p\u003e\u003cp\u003eRide height is adjusted at the threaded strut body, and the damping adjustment is made by hand with click stops so a setting can be repeated. Struts are stainless steel.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eRebound and compression adjustable separately\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: EV, EV All-wheel Drive, EV AWD, EV Perfomance All-wheel Drive, EV Perfomance AWD, EV Performance AWD, EV Performance All-wheel Drive, EV PERFORMANCE All-wheel Drive, Long Range All-wheel Drive\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Tesla Model 3 (5YJ3), Tesla Model Y (5YJY)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eFor cars which have electronic dampers, make sure they are shut down. Specific electronical damper shut-downs are available from KW. Please check our accessories list\u003c\/li\u003e\n\u003cli\u003eDampers are adjusted by easily operating adjustment wheels. Rebound is only adjustable if the top of the piston rod is accessible. This will depend on the vehicle construction.\u003c\/li\u003e\n\u003cli\u003ePart number 35287010\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841873793103,"sku":"35287010","price":5433.05,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0004889.jpg?v=1789945766"},{"product_id":"kw-leveling-suspension-v3-for-03-2019-tesla-model-y-5yjy-3520887010","title":"KW V3 Leveling Coilover Kit - Tesla Model 3 (5YJ3), Tesla Model Y (5YJY) [3520887010]","description":"\u003cp\u003eKW V3 Leveling Coilover Kit for the Tesla Model 3 (5YJ3), Tesla Model Y (5YJY).\u003c\/p\u003e\u003ch3\u003eAbout the KW V3 Leveling\u003c\/h3\u003e\u003cp\u003eKW V3 Leveling is a V3 coilover with self levelling for the rear axle, built for cars that carry or tow weight and would otherwise sit down at the back. The system keeps the ride height where it was set regardless of what is loaded.\u003c\/p\u003e\u003cp\u003eRebound and compression stay independently adjustable, as on the standard V3.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eRebound and compression adjustable separately\u003c\/li\u003e\n\u003cli\u003eSelf levelling rear axle\u003c\/li\u003e\n\u003cli\u003eSuits engines: EV, EV All-wheel Drive, EV AWD, EV Perfomance All-wheel Drive, EV Perfomance AWD, EV Performance AWD, EV Performance All-wheel Drive, EV PERFORMANCE All-wheel Drive, Long Range All-wheel Drive\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Tesla Model 3 (5YJ3), Tesla Model Y (5YJY)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eFor cars which have electronic dampers, make sure they are shut down. Specific electronical damper shut-downs are available from KW. Please check our accessories list\u003c\/li\u003e\n\u003cli\u003eDampers are adjusted by easily operating adjustment wheels. Rebound is only adjustable if the top of the piston rod is accessible. This will depend on the vehicle construction.\u003c\/li\u003e\n\u003cli\u003ePart number 3520887010\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841887752271,"sku":"3520887010","price":5338.05,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0012557.jpg?v=1789945893"},{"product_id":"kw-leveling-suspension-v3-for-01-2017-tesla-model-3-5yj3-3520887007","title":"KW V3 Leveling Coilover Kit - Tesla Model 3 (5YJ3)","description":"\u003cp\u003eKW V3 Leveling Coilover Kit for the Tesla Model 3 (5YJ3).\u003c\/p\u003e\u003ch3\u003eAbout the KW V3 Leveling\u003c\/h3\u003e\u003cp\u003eKW V3 Leveling is a V3 coilover with self levelling for the rear axle, built for cars that carry or tow weight and would otherwise sit down at the back. The system keeps the ride height where it was set regardless of what is loaded.\u003c\/p\u003e\u003cp\u003eRebound and compression stay independently adjustable, as on the standard V3.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eRebound and compression adjustable separately\u003c\/li\u003e\n\u003cli\u003eSelf levelling rear axle\u003c\/li\u003e\n\u003cli\u003eSuits engines: 5YJ3 Professional fitting is recommended.\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Tesla Model 3 (5YJ3)\u003c\/li\u003e\n\u003cli\u003ePart number 3520887007\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841887817807,"sku":"3520887007","price":6179.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0012556.jpg?v=1789945896"},{"product_id":"suspension-v3-leveling-3520887006","title":"KW V3 Leveling Coilover Kit - Tesla Model 3 (5YJ3), Tesla Model Y (5YJY) [3520887006]","description":"\u003cp\u003eKW V3 Leveling Coilover Kit for the Tesla Model 3 (5YJ3), Tesla Model Y (5YJY).\u003c\/p\u003e\u003ch3\u003eAbout the KW V3 Leveling\u003c\/h3\u003e\u003cp\u003eKW V3 Leveling is a V3 coilover with self levelling for the rear axle, built for cars that carry or tow weight and would otherwise sit down at the back. The system keeps the ride height where it was set regardless of what is loaded.\u003c\/p\u003e\u003cp\u003eRebound and compression stay independently adjustable, as on the standard V3.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eRebound and compression adjustable separately\u003c\/li\u003e\n\u003cli\u003eSelf levelling rear axle\u003c\/li\u003e\n\u003cli\u003eSuits engines: EV, EV Rear-Wheel Drive, Long Range, Long Range Rear-Wheel Drive\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Tesla Model 3 (5YJ3), Tesla Model Y (5YJY)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eDampers are adjusted by easily operating adjustment wheels. Rebound is only adjustable if the top of the piston rod is accessible. This will depend on the vehicle construction.\u003c\/li\u003e\n\u003cli\u003ePart number 3520887006\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841898172495,"sku":"3520887006","price":4692.05,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0014901.jpg?v=1789945989"},{"product_id":"kw-coilover-suspension-v1-inox-for-tesla-model-3-5yj3-model-y-5yjy-10287006","title":"KW V1 Coilover Kit - Tesla Model 3 (5YJ3), Tesla Model Y (5YJY) [10287006]","description":"\u003cp\u003eKW V1 Coilover Kit for the Tesla Model 3 (5YJ3), Tesla Model Y (5YJY).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: EV, EV Rear-Wheel Drive, Long Range Rear-Wheel Drive\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Tesla Model 3 (5YJ3), Tesla Model Y (5YJY)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003ePart number 10287006\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841901318223,"sku":"10287006","price":2386.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0021356.jpg?v=1789946025"},{"product_id":"kw-coilover-suspension-v1-inox-for-tesla-model-3-5yj3-model-y-5yjy-10287010","title":"KW V1 Coilover Kit - Tesla Model 3 (5YJ3), Tesla Model Y (5YJY) [10287010]","description":"\u003cp\u003eKW V1 Coilover Kit for the Tesla Model 3 (5YJ3), Tesla Model Y (5YJY).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: EV, EV All-wheel Drive, EV AWD, EV Perfomance All-wheel Drive, EV Perfomance AWD, EV Performance AWD, EV Performance All-wheel Drive, EV PERFORMANCE All-wheel Drive, Long Range All-wheel Drive\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Tesla Model 3 (5YJ3), Tesla Model Y (5YJY)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eFor cars which have electronic dampers, make sure they are shut down. Specific electronical damper shut-downs are available from KW. Please check our accessories list\u003c\/li\u003e\n\u003cli\u003ePart number 10287010\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841901547599,"sku":"10287010","price":2512.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0021361.jpg?v=1789946026"},{"product_id":"a1-202-girodisc-tesla-model-3-front-rotors","title":"Girodisc Tesla Model 3 Front Rotors","description":"\u003cp\u003eThe Girodisc system is a direct replacement for the OE disc. No modifications are necessary. The disc will bolt directly to the car and work with OE calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. \u003cbr\u003eThe central hat section of our rotor is  made from strictly U.S. sourced 6061-T6 aircraft specification  aluminum.  The disc is  made from our own proprietary cast iron, poured in the USA and machined  from start to finish in house at Girodisc.  The rotor utilizes 48 curved directional vanes, developed in racing to act as a  centrifugal pump to force cooling air through the disc.\u003cbr\u003e\u003cbr\u003eThe  rotor and hat have a floating mount system, which utilizes 8 or 10 high  strength alloy steel drive pins, manufactured by Girodisc in the USA to  our own specifications and cadmium plated for a long lasting corrosion  resistance. These pins take the load from braking actions while  maintaining the axial and radial float between the hat and disc. The  pins are secured by grade 12 cap screws with hardened washers. In order  to keep the rotors from making noise when cold, the pins are mounted  with anti-noise spring washers on the rotor side which allow the rotor  to grow with heat expansion but eliminate the rattle and noise  associated with floating rotors. This float also allows the rotor to  self center between the pads.\u003cbr\u003e\u003cbr\u003eOnce the Girodisc system is in place, simply replace the cast iron rotor when needed.  \u003cbr\u003e\u003cbr\u003eSold\/priced per pair.\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA1-202\u003c\/p\u003e\u003cp\u003e\u003cem\u003eProfessional fitting is recommended.\u003c\/em\u003e\u003c\/p\u003e","brand":"Girodisc","offers":[{"title":"Default Title","offer_id":46874505674831,"sku":"A1-202","price":2789.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/GIR-0006087.jpg?v=1790056464"},{"product_id":"a1-208-girodisc-tesla-model-3-performance-front-rotors","title":"Girodisc Tesla Model 3 Performance Front Rotors","description":"\u003cp\u003eThe Girodisc system is a direct replacement for the OE disc. No modifications are necessary. The disc will bolt directly to the car and work with OE calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. \u003cbr\u003eThe central hat section of our rotor is  made from strictly U.S. sourced 6061-T6 aircraft specification  aluminum.  The disc is  made from our own proprietary cast iron, poured in the USA and machined  from start to finish in house at Girodisc.  The rotor utilizes 48 curved directional vanes, developed in racing to act as a  centrifugal pump to force cooling air through the disc.\u003cbr\u003e\u003cbr\u003eThe  rotor and hat have a floating mount system, which utilizes 8 or 10 high  strength alloy steel drive pins, manufactured by Girodisc in the USA to  our own specifications and cadmium plated for a long lasting corrosion  resistance. These pins take the load from braking actions while  maintaining the axial and radial float between the hat and disc. The  pins are secured by grade 12 cap screws with hardened washers. In order  to keep the rotors from making noise when cold, the pins are mounted  with anti-noise spring washers on the rotor side which allow the rotor  to grow with heat expansion but eliminate the rattle and noise  associated with floating rotors. This float also allows the rotor to  self center between the pads.\u003cbr\u003e\u003cbr\u003eOnce the Girodisc system is in place, simply replace the cast iron rotor when needed.  \u003cbr\u003e\u003cbr\u003eSold\/priced per pair.\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA1-208\u003c\/p\u003e\u003cp\u003e\u003cem\u003eProfessional fitting is recommended.\u003c\/em\u003e\u003c\/p\u003e","brand":"Girodisc","offers":[{"title":"Default Title","offer_id":46874505838671,"sku":"A1-208","price":2329.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/GIR-0006093.jpg?v=1790056465"},{"product_id":"a2-202-girodisc-tesla-model-3-rear-rotors","title":"Girodisc Tesla Model 3 Rear Rotors","description":"\u003cp\u003eThe Girodisc system is a direct replacement for the OE disc. No modifications are necessary. The disc will bolt directly to the car and work with OE calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Girodisc rear rotors are approx 8.1 lbs. lighter per rotor then the stock units. 24.7 lbs. vs. 16.6 lbs. This reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.\u003cbr\u003e\u003cbr\u003eThe central hat section of our rotor is  made from strictly U.S. sourced 6061-T6 aircraft specification  aluminum.  The disc is  made from our own proprietary cast iron, poured in the USA and machined  from start to finish in house at Girodisc.  The rotor utilizes a curved  vane design, developed in racing to act as a  centrifugal pump to force cooling air through the disc.\u003cbr\u003e\u003cbr\u003eThe  rotor and hat have a floating mount system, which utilizes 10 high  strength alloy steel drive pins, manufactured by Girodisc in the USA to  our own specifications and cadmium plated for a long lasting corrosion  resistance. These pins take the load from braking actions while  maintaining the axial and radial float between the hat and disc. The  pins are secured by class 12.9 cap screws with hardened washers. In order  to keep the rotors from making noise when cold, the pins are mounted  with anti-noise spring washers on the rotor side which allow the rotor  to grow with heat expansion but eliminate the rattle and noise  associated with floating rotors. This float also allows the rotor to  self center between the pads.\u003cbr\u003e\u003cbr\u003eOnce the Girodisc system is in place, simply replace the cast iron rotor when needed.  \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: 14pt;\"\u003eSold\/priced per pair\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA2-202\u003c\/p\u003e\u003cp\u003e\u003cem\u003eProfessional fitting is recommended.\u003c\/em\u003e\u003c\/p\u003e","brand":"Girodisc","offers":[{"title":"Default Title","offer_id":46874508623951,"sku":"A2-202","price":2609.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/GIR-0006196.jpg?v=1790056481"},{"product_id":"a2-208-girodisc-tesla-model-3-performance-rear-rotors","title":"Girodisc Tesla Model 3 Performance Rear Rotors","description":"\u003cp\u003eThe Girodisc system is a direct replacement for the OE disc. No modifications are necessary. The disc will bolt directly to the car and work with OE calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Girodisc rear rotors are approx 8.1 lbs. lighter per rotor then the stock units. 24.7 lbs. vs. 16.6 lbs. This reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.\u003cbr\u003e\u003cbr\u003eThe central hat section of our rotor is  made from strictly U.S. sourced 6061-T6 aircraft specification  aluminum.  The disc is  made from our own proprietary cast iron, poured in the USA and machined  from start to finish in house at Girodisc.  The rotor utilizes a curved  vane design, developed in racing to act as a  centrifugal pump to force cooling air through the disc.\u003cbr\u003e\u003cbr\u003eThe  rotor and hat have a floating mount system, which utilizes 10 high  strength alloy steel drive pins, manufactured by Girodisc in the USA to  our own specifications and cadmium plated for a long lasting corrosion  resistance. These pins take the load from braking actions while  maintaining the axial and radial float between the hat and disc. The  pins are secured by class 12.9 cap screws with hardened washers. In order  to keep the rotors from making noise when cold, the pins are mounted  with anti-noise spring washers on the rotor side which allow the rotor  to grow with heat expansion but eliminate the rattle and noise  associated with floating rotors. This float also allows the rotor to  self center between the pads.\u003cbr\u003e\u003cbr\u003eOnce the Girodisc system is in place, simply replace the cast iron rotor when needed.  \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: 14pt;\"\u003eSold\/priced per pair\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA2-208\u003c\/p\u003e\u003cp\u003e\u003cem\u003eProfessional fitting is recommended.\u003c\/em\u003e\u003c\/p\u003e","brand":"Girodisc","offers":[{"title":"Default Title","offer_id":46874508722255,"sku":"A2-208","price":2479.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/GIR-0006200.jpg?v=1790056484"},{"product_id":"d1-202-girodisc-tesla-model-3-front-replacement-rings","title":"Girodisc Tesla Model 3 Front Replacement Rings","description":"\u003cp\u003eOur replacement rings are \u003cstrong\u003esold in pairs\u003c\/strong\u003e and include replacement hardware. The only parts you will reuse are your existing GiroDisc hats.\u003c\/p\u003e\u003cp\u003ePlease note that unless specifically noted, GiroDisc replacement rings are \u003cstrong\u003eonly designed to work with GiroDisc hats\u003c\/strong\u003e. They are not designed to be used with other brands, including hats from cars equipped with 2-piece rotors from the factory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eD1-202\u003c\/p\u003e\u003cp\u003e\u003cem\u003eProfessional fitting is recommended.\u003c\/em\u003e\u003c\/p\u003e","brand":"Girodisc","offers":[{"title":"Default Title","offer_id":46874514686031,"sku":"D1-202","price":1059.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/GIR-0007987.jpg?v=1790056520"},{"product_id":"d1-208-girodisc-tesla-model-3-performance-front-replacement-rings","title":"Girodisc Tesla Model 3 Performance Front Replacement Rings","description":"\u003cp\u003eOur replacement rings are \u003cstrong\u003esold in pairs\u003c\/strong\u003e and include replacement hardware. The only parts you will reuse are your existing GiroDisc hats.\u003c\/p\u003e\u003cp\u003ePlease note that unless specifically noted, GiroDisc replacement rings are \u003cstrong\u003eonly designed to work with GiroDisc hats\u003c\/strong\u003e. They are not designed to be used with other brands, including hats from cars equipped with 2-piece rotors from the factory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eD1-208\u003c\/p\u003e\u003cp\u003e\u003cem\u003eProfessional fitting is recommended.\u003c\/em\u003e\u003c\/p\u003e","brand":"Girodisc","offers":[{"title":"Default Title","offer_id":46874514817103,"sku":"D1-208","price":1219.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/GIR-0007992.jpg?v=1790056521"},{"product_id":"d2-202-girodisc-tesla-model-3-rear-replacement-rings","title":"Girodisc Tesla Model 3 Rear Replacement Rings","description":"\u003cp\u003eOur replacement rings are \u003cstrong\u003esold in pairs\u003c\/strong\u003e and include replacement hardware. The only parts you will reuse are your existing GiroDisc hats.\u003c\/p\u003e\u003cp\u003ePlease note that unless specifically noted, GiroDisc replacement rings are \u003cstrong\u003eonly designed to work with GiroDisc hats\u003c\/strong\u003e. They are not designed to be used with other brands, including hats from cars equipped with 2-piece rotors from the factory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eD2-202\u003c\/p\u003e\u003cp\u003e\u003cem\u003eProfessional fitting is recommended.\u003c\/em\u003e\u003c\/p\u003e","brand":"Girodisc","offers":[{"title":"Default Title","offer_id":46874516750415,"sku":"D2-202","price":1059.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/GIR-0008057.jpg?v=1790056535"},{"product_id":"d2-208-girodisc-tesla-model-3-performance-rear-replacement-rings","title":"Girodisc Tesla Model 3 Performance Rear Replacement Rings","description":"\u003cp\u003eOur replacement rings are \u003cstrong\u003esold in pairs\u003c\/strong\u003e and include replacement hardware. The only parts you will reuse are your existing GiroDisc hats.\u003c\/p\u003e\u003cp\u003ePlease note that unless specifically noted, GiroDisc replacement rings are \u003cstrong\u003eonly designed to work with GiroDisc hats\u003c\/strong\u003e. They are not designed to be used with other brands, including hats from cars equipped with 2-piece rotors from the factory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eD2-208\u003c\/p\u003e\u003cp\u003e\u003cem\u003eProfessional fitting is recommended.\u003c\/em\u003e\u003c\/p\u003e","brand":"Girodisc","offers":[{"title":"Default Title","offer_id":46874516815951,"sku":"D2-208","price":1059.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/GIR-0008060.jpg?v=1790056532"},{"product_id":"18287006-st-coilover-xa-kit-tesla-model-3-5yj3-tesla-model-y-5yjy","title":"ST Coilover XA Kit - Tesla Model 3 (5YJ3), Tesla Model Y (5YJY)","description":"\u003cp\u003eST Coilover XA Kit for the Tesla Model 3.\u003c\/p\u003e\u003ch3\u003eAbout the ST XA coilovers\u003c\/h3\u003e\u003cp\u003eThe ST XA adds rebound adjustment to the height adjustable coilover, so the car can be firmed up for a back road or softened for a rough one without touching the ride height.\u003c\/p\u003e\u003cp\u003eConstruction is the same galvanised, multiple sealed strut as the X, with twin-tube dampers and an adjustable spring plate.\u003c\/p\u003e\u003cp\u003eFor drivers wanting more than just ride height adjustment comes the ST XA coilover. Developed alongside KW Automotive the ST XA allows individual adjustment of the damping to suit just about all your driving needs!\u003c\/p\u003e\u003cp\u003eST XA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. Any vehicle fitted with ST XA coilovers will act much more agile and sporty compared to standard.\u003c\/p\u003e\u003cp\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal damper adjustment\u003c\/li\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eSuits engines: EV, EV Rear-Wheel Drive, Long Range Rear-Wheel Drive\u003c\/li\u003e\n\u003cli\u003eListed by ST for: Tesla Model 3 (5YJ3); Tesla Model Y (5YJY)\u003c\/li\u003e\n\u003cli\u003ePart number 18287006\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. ST Suspensions warranty applies.\u003c\/p\u003e","brand":"ST Suspensions","offers":[{"title":"Default Title","offer_id":46874720501839,"sku":"18287006","price":2491.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/STS-0002841.jpg?v=1790060070"},{"product_id":"18287010-st-coilovers-st-xa-galvanized-steel-with-damping-adjustment-tesla-model-3-5yj3-tesla-model-y-5yjy","title":"ST Coilovers ST XA galvanized steel (with damping adjustment) - Tesla Model 3 (5YJ3), Tesla Model Y (5YJY)","description":"\u003cp\u003eST Coilovers ST XA galvanized steel (with damping adjustment) for the Tesla Model 3.\u003c\/p\u003e\u003ch3\u003eAbout the ST XA coilovers\u003c\/h3\u003e\u003cp\u003eThe ST XA adds rebound adjustment to the height adjustable coilover, so the car can be firmed up for a back road or softened for a rough one without touching the ride height.\u003c\/p\u003e\u003cp\u003eConstruction is the same galvanised, multiple sealed strut as the X, with twin-tube dampers and an adjustable spring plate.\u003c\/p\u003e\u003cp\u003eFor drivers wanting more than just ride height adjustment comes the ST XA coilover. Developed alongside KW Automotive the ST XA allows individual adjustment of the damping to suit just about all your driving needs!\u003c\/p\u003e\u003cp\u003eST XA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. Any vehicle fitted with ST XA coilovers will act much more agile and sporty compared to standard.\u003c\/p\u003e\u003cp\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal damper adjustment\u003c\/li\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eSuits engines: EV, EV All-wheel Drive, EV AWD, EV Perfomance All-wheel Drive, EV Perfomance AWD, EV Performance AWD, EV Performance All-wheel Drive, EV PERFORMANCE All-wheel Drive, Long Range All-wheel Drive\u003c\/li\u003e\n\u003cli\u003eListed by ST for: Tesla Model 3 (5YJ3); Tesla Model Y (5YJY)\u003c\/li\u003e\n\u003cli\u003eAt vehicles equipped with electronic damping, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68511462\u003c\/li\u003e\n\u003cli\u003ePart number 18287010\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. ST Suspensions warranty applies.\u003c\/p\u003e","brand":"ST Suspensions","offers":[{"title":"Default Title","offer_id":46874808483919,"sku":"18287010","price":2491.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/STS-0014945.jpg?v=1790060268"},{"product_id":"28287001-st-lowering-sport-springs-tesla-model-3-5yj3-ev-ev-awd","title":"ST Lowering Sport Springs - Tesla Model 3 (5YJ3) (EV, EV AWD)","description":"\u003cp\u003eST Lowering Sport Springs for the Tesla Model 3.\u003c\/p\u003e\u003ch3\u003eAbout ST lowering springs\u003c\/h3\u003e\u003cp\u003eST lowering springs drop the car on its factory dampers, closing the gap between tyre and guard and lowering the centre of gravity, which cuts body roll and sharpens the way the car changes direction.\u003c\/p\u003e\u003cp\u003eThey are progressive rate, so the spring stays civil over normal roads and firms up as it compresses. The drop for this vehicle is listed in the specification where ST state it.\u003c\/p\u003e\u003cp\u003eST suspensions is proud to boast one of the largest applications for sport springs with more than 1000 vehicles now catered for. What’s more, ST sport springs are one of the few lowering springs on the market that (in combination with the standard suspension) will greatly improve the driving behavious of a vehicle as well as its overall looks!\u003c\/p\u003e\u003cp\u003eMade from chrome silicon steel in a cold winding process, ST sport springs are multi-coated with a final expoy coating ensuring an OEM quality and finish. As a result, they withstand a variety of weather conditions all year round. Depending on the vehicle model, ST suspension sport springs will allow a typical lowering of around 20mm on the front axle and 15mm on the rear axle. Some vehicles can achieve a much greater lowering with the VW Golf Mk1 benefitng from 60mm on the front and rear axle!\u003c\/p\u003e\u003cp\u003eCompared to standard suspension, ST sport springs lower the centre of gravity to provide much better driving dynamics and handling. Furthermore, compression and rebound is also reduced which allows the car to drive more agile with reduced body roll.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuits engines: EV, EV AWD\u003c\/li\u003e\n\u003cli\u003eListed by ST for: Tesla Model 3 (5YJ3)\u003c\/li\u003e\n\u003cli\u003eExcluding four wheel drive models\u003c\/li\u003e\n\u003cli\u003ePart number 28287001\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA set of springs for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. ST Suspensions warranty applies.\u003c\/p\u003e","brand":"ST Suspensions","offers":[{"title":"Default Title","offer_id":46874978254927,"sku":"28287001","price":727.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/STS-0015941.jpg?v=1790060620"},{"product_id":"28287002-st-lowering-sport-springs-tesla-model-3-5yj3-ev-ev-all-wheel-drive-ev-awd-3-more","title":"ST Lowering Sport Springs - Tesla Model 3 (5YJ3)","description":"\u003cp\u003eST Lowering Sport Springs for the Tesla Model 3.\u003c\/p\u003e\u003ch3\u003eAbout ST lowering springs\u003c\/h3\u003e\u003cp\u003eST lowering springs drop the car on its factory dampers, closing the gap between tyre and guard and lowering the centre of gravity, which cuts body roll and sharpens the way the car changes direction.\u003c\/p\u003e\u003cp\u003eThey are progressive rate, so the spring stays civil over normal roads and firms up as it compresses. The drop for this vehicle is listed in the specification where ST state it.\u003c\/p\u003e\u003cp\u003eST suspensions is proud to boast one of the largest applications for sport springs with more than 1000 vehicles now catered for. What’s more, ST sport springs are one of the few lowering springs on the market that (in combination with the standard suspension) will greatly improve the driving behavious of a vehicle as well as its overall looks!\u003c\/p\u003e\u003cp\u003eMade from chrome silicon steel in a cold winding process, ST sport springs are multi-coated with a final expoy coating ensuring an OEM quality and finish. As a result, they withstand a variety of weather conditions all year round. Depending on the vehicle model, ST suspension sport springs will allow a typical lowering of around 20mm on the front axle and 15mm on the rear axle. Some vehicles can achieve a much greater lowering with the VW Golf Mk1 benefitng from 60mm on the front and rear axle!\u003c\/p\u003e\u003cp\u003eCompared to standard suspension, ST sport springs lower the centre of gravity to provide much better driving dynamics and handling. Furthermore, compression and rebound is also reduced which allows the car to drive more agile with reduced body roll.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuits engines: EV, EV All-wheel Drive, EV AWD, EV Perfomance All-wheel Drive, EV Perfomance AWD, EV Performance AWD\u003c\/li\u003e\n\u003cli\u003eListed by ST for: Tesla Model 3 (5YJ3)\u003c\/li\u003e\n\u003cli\u003eOnly for 4 wheel drive models (4x4, 4motion, Quattro etc.)\u003c\/li\u003e\n\u003cli\u003ePart number 28287002\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA set of springs for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. ST Suspensions warranty applies.\u003c\/p\u003e","brand":"ST Suspensions","offers":[{"title":"Default Title","offer_id":46875035861071,"sku":"28287002","price":727.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/STS-0015944.jpg?v=1790060834"}],"url":"https:\/\/www.heasmans.com.au\/collections\/tesla-model-3.oembed","provider":"Heasmans","version":"1.0","type":"link"}