{"title":"Suzuki Jimny","description":"\u003cp\u003eLift kits and load assist for the Suzuki Jimny from Bilstein, Polyair and H\u0026amp;R. Fitted at Sydenham or shipped Australia wide.\u003c\/p\u003e","products":[{"product_id":"handr-lift-springs-for-suzuki-jimny","title":"H\u0026R Lift Springs - Suzuki Jimny [28649-1]","description":"\u003cp\u003eH\u0026amp;R Lift Springs for the Suzuki Jimny, raising the vehicle 20mm.\u003c\/p\u003e\u003ch3\u003eAbout the H\u0026amp;R Lift Springs\u003c\/h3\u003e\u003cp\u003eH\u0026amp;R Lift Springs raise the vehicle for extra ground clearance and a more upright stance, without changing how the suspension behaves at normal speeds. The spring is designed to keep the factory ride manners rather than firming everything up.\u003c\/p\u003e\u003cp\u003eThey work with the factory dampers and use the standard mounting points. The lift for this vehicle is listed in the specification.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLift: 20mm\u003c\/li\u003e\n\u003cli\u003eHardened and tempered spring steel\u003c\/li\u003e\n\u003cli\u003eZinc phosphate coating for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eWorks with the factory dampers\u003c\/li\u003e\n\u003cli\u003ePart number 28649-1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSet of four H\u0026amp;R Lift Springs\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eProfessional fitting and a wheel alignment are recommended after installation.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. H\u0026amp;R warranty applies.\u003c\/p\u003e","brand":"H\u0026R Suspension","offers":[{"title":"Default Title","offer_id":45855334170703,"sku":"28649-1","price":745.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/28649-1.jpg?v=1781679849"},{"product_id":"handr-front-sway-bar-for-suzuki-jimny","title":"H\u0026R Sway Bar - Suzuki Jimny","description":"\u003cp\u003eH\u0026amp;R Sway Bar for the Suzuki Jimny.\u003c\/p\u003e\u003ch3\u003eAbout the H\u0026amp;R Sway Bar\u003c\/h3\u003e\u003cp\u003eAn H\u0026amp;R Sway Bar stiffens the car in roll so it stays flatter through corners, while leaving straight line ride quality largely as it was. The thickness and any adjustment positions are listed in the specification.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBar thickness: 30mm\u003c\/li\u003e\n\u003cli\u003e3 adjustment positions\u003c\/li\u003e\n\u003cli\u003eDirect fit to the factory mounting points\u003c\/li\u003e\n\u003cli\u003ePart number 33678-1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH\u0026amp;R Sway Bar\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eProfessional fitting is recommended.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. H\u0026amp;R warranty applies.\u003c\/p\u003e","brand":"H\u0026R Suspension","offers":[{"title":"Default Title","offer_id":45855334203471,"sku":"33678-1","price":1012.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/33678-1_1.jpg?v=1781679851"},{"product_id":"handr-cup-kit-coilovers-for-suzuki-jimny","title":"H\u0026R Cup Kit - Suzuki Jimny","description":"\u003cp\u003eH\u0026amp;R Cup Kit for the Suzuki Jimny, lowering 45mm.\u003c\/p\u003e\u003ch3\u003eAbout the H\u0026amp;R Cup Kit\u003c\/h3\u003e\u003cp\u003eAn H\u0026amp;R Cup Kit pairs lowering springs with dampers chosen to match them, so the two work as one package rather than being assembled from separate parts. The drop and the damper brand are listed in the specification.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLowering spring kit including Koni Heavy Trak shock absorbers.\u003c\/li\u003e\n\u003cli\u003eLowering: 45mm\u003c\/li\u003e\n\u003cli\u003eMatched springs and dampers\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant finish\u003c\/li\u003e\n\u003cli\u003ePart number 28678-2\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH\u0026amp;R Cup Kit\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eProfessional fitting and a wheel alignment are recommended after installation.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. H\u0026amp;R warranty applies.\u003c\/p\u003e","brand":"H\u0026R Suspension","offers":[{"title":"Default Title","offer_id":45855334236239,"sku":"28678-2","price":1760.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/28678-1.jpg?v=1781679852"},{"product_id":"handr-lift-springs-for-suzuki-jimny-1","title":"H\u0026R Lift Springs - Suzuki Jimny [1-SUJI2SF40-wc569]","description":"\u003cp\u003eH\u0026amp;R Lift Springs for the Suzuki Jimny, raising the vehicle 40mm.\u003c\/p\u003e\u003ch3\u003eAbout the H\u0026amp;R Lift Springs\u003c\/h3\u003e\u003cp\u003eH\u0026amp;R Lift Springs raise the vehicle for extra ground clearance and a more upright stance, without changing how the suspension behaves at normal speeds. The spring is designed to keep the factory ride manners rather than firming everything up.\u003c\/p\u003e\u003cp\u003eThey work with the factory dampers and use the standard mounting points. The lift for this vehicle is listed in the specification.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLift: 40mm\u003c\/li\u003e\n\u003cli\u003eHardened and tempered spring steel\u003c\/li\u003e\n\u003cli\u003eZinc phosphate coating for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eWorks with the factory dampers\u003c\/li\u003e\n\u003cli\u003ePart number 1-SUJI2SF40-wc569\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH\u0026amp;R Lift Springs\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eProfessional fitting and a wheel alignment are recommended after installation.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. H\u0026amp;R warranty applies.\u003c\/p\u003e","brand":"H\u0026R Suspension","offers":[{"title":"Default Title","offer_id":45856163954767,"sku":"1-SUJI2SF40-wc569","price":880.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/1-SUJI2SF40.jpg?v=1781681093"},{"product_id":"bilstein-b6-front-shock-absorber-for-suzuki-jimny-gen-3-1998-2017-standard","title":"Bilstein B6 Front Shock Absorber for Suzuki Jimny GEN 3 1998-2017 (Standard)","description":"\u003cp\u003eBilstein B6 front shock absorber for the Suzuki Jimny GEN 3 1998-2017, at standard ride height.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: front\u003c\/li\u003e\n\u003cli\u003eSuits standard ride height\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003ePart number BE5 6062\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber. Two are needed to do the front of the vehicle.\u003c\/p\u003e\u003cp\u003ePairs with the Bilstein B6 rear shock absorber for the same vehicle, part number BE5 6063.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811445428303,"sku":"BE5 6062","price":330.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/BE5-6062.jpg?v=1789780310"},{"product_id":"bilstein-b6-front-shock-absorber-for-suzuki-jimny-gen-4-2018-on-standard","title":"Bilstein B6 Front Shock Absorber for Suzuki Jimny GEN 4 2018 on (Standard)","description":"\u003cp\u003eBilstein B6 front shock absorber for the Suzuki Jimny GEN 4 2018 on, at standard ride height.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: front\u003c\/li\u003e\n\u003cli\u003eSuits standard ride height\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003eExtended length 401mm\u003c\/li\u003e\n\u003cli\u003ePart number 24-327329\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber. Two are needed to do the front of the vehicle.\u003c\/p\u003e\u003cp\u003ePairs with the Bilstein B6 rear shock absorber for the same vehicle, part number 24-327336.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811445788751,"sku":"24-327329","price":352.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/24-327329.jpg?v=1789780311"},{"product_id":"bilstein-b6-rear-shock-absorber-for-suzuki-jimny-gen-4-2018-on-raised","title":"Bilstein B6 Rear Shock Absorber for Suzuki Jimny GEN 4 2018 on (Raised)","description":"\u003cp\u003eBilstein B6 rear shock absorber for the Suzuki Jimny GEN 4 2018 on (Raised), for vehicles raised .\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: rear\u003c\/li\u003e\n\u003cli\u003eSuits ride height: Raised\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003eExtended length 477mm\u003c\/li\u003e\n\u003cli\u003ePart number 24-321747\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber. Two are needed to do the rear of the vehicle.\u003c\/p\u003e\u003cp\u003ePairs with the Bilstein B6 front shock absorber for the same vehicle, part number 24-321730.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811445854287,"sku":"24-321747","price":352.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/24-321747.jpg?v=1789780312"},{"product_id":"bilstein-b6-rear-shock-absorber-for-suzuki-jimny-gen-3-1998-2017-standard","title":"Bilstein B6 Rear Shock Absorber for Suzuki Jimny GEN 3 1998-2017 (Standard)","description":"\u003cp\u003eBilstein B6 rear shock absorber for the Suzuki Jimny GEN 3 1998-2017, at standard ride height.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: rear\u003c\/li\u003e\n\u003cli\u003eSuits standard ride height\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003ePart number BE5 6063\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber. Two are needed to do the rear of the vehicle.\u003c\/p\u003e\u003cp\u003ePairs with the Bilstein B6 front shock absorber for the same vehicle, part number BE5 6062.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811445821519,"sku":"BE5 6063","price":330.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/BE5-6063.jpg?v=1789780310"},{"product_id":"bilstein-b6-front-shock-absorber-for-suzuki-jimny-gen-4-2018-on-raised","title":"Bilstein B6 Front Shock Absorber for Suzuki Jimny GEN 4 2018 on (Raised)","description":"\u003cp\u003eBilstein B6 front shock absorber for the Suzuki Jimny GEN 4 2018 on (Raised), for vehicles raised .\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: front\u003c\/li\u003e\n\u003cli\u003eSuits ride height: Raised\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003eExtended length 419mm\u003c\/li\u003e\n\u003cli\u003ePart number 24-321730\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber. Two are needed to do the front of the vehicle.\u003c\/p\u003e\u003cp\u003ePairs with the Bilstein B6 rear shock absorber for the same vehicle, part number 24-321747.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811445952591,"sku":"24-321730","price":374.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/24-321730.jpg?v=1789780310"},{"product_id":"bilstein-b6-rear-shock-absorber-for-suzuki-jimny-gen-4-2018-on-standard","title":"Bilstein B6 Rear Shock Absorber for Suzuki Jimny GEN 4 2018 on (Standard)","description":"\u003cp\u003eBilstein B6 rear shock absorber for the Suzuki Jimny GEN 4 2018 on, at standard ride height.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: rear\u003c\/li\u003e\n\u003cli\u003eSuits standard ride height\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003eExtended length 454mm\u003c\/li\u003e\n\u003cli\u003ePart number 24-327336\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber. Two are needed to do the rear of the vehicle.\u003c\/p\u003e\u003cp\u003ePairs with the Bilstein B6 front shock absorber for the same vehicle, part number 24-327329.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811446018127,"sku":"24-327336","price":352.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/24-327336.jpg?v=1789780311"},{"product_id":"18276008-st-coilover-xa-kit-suzuki-jimny-closed-off-road-vehicle-gj-a6g","title":"ST Coilover XA Kit - Suzuki Jimny Closed Off-Road Vehicle (GJ, A6G)","description":"\u003cp\u003eST Coilover XA Kit for the Suzuki Jimny Closed Off-Road Vehicle.\u003c\/p\u003e\u003ch3\u003eAbout the ST XA coilovers\u003c\/h3\u003e\u003cp\u003eThe ST XA adds rebound adjustment to the height adjustable coilover, so the car can be firmed up for a back road or softened for a rough one without touching the ride height.\u003c\/p\u003e\u003cp\u003eConstruction is the same galvanised, multiple sealed strut as the X, with twin-tube dampers and an adjustable spring plate.\u003c\/p\u003e\u003cp\u003eFor drivers wanting more than just ride height adjustment comes the ST XA coilover. Developed alongside KW Automotive the ST XA allows individual adjustment of the damping to suit just about all your driving needs!\u003c\/p\u003e\u003cp\u003eST XA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. Any vehicle fitted with ST XA coilovers will act much more agile and sporty compared to standard.\u003c\/p\u003e\u003cp\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal damper adjustment\u003c\/li\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eSuits engines: 1.5 AllGrip\u003c\/li\u003e\n\u003cli\u003eListed by ST for: Suzuki Jimny Closed Off-Road Vehicle (GJ, A6G)\u003c\/li\u003e\n\u003cli\u003ePart number 18276008\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. ST Suspensions warranty applies.\u003c\/p\u003e","brand":"ST Suspensions","offers":[{"title":"Default Title","offer_id":46874710605903,"sku":"18276008","price":2036.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/STS-0002726.jpg?v=1790060044"},{"product_id":"polyair-63593","title":"Polyair Red Series Airbag Kit - Suzuki Jimny (standard height)","description":"\u003cp\u003ePolyair Red Series Airbag Kit for the Suzuki Jimny (standard height).\u003c\/p\u003e\u003ch3\u003eAbout the Polyair Red Series\u003c\/h3\u003e\u003cp\u003eThe Red Series is Polyair's in-coil airbag, made to sit inside the rear coil spring of a four wheel drive, ute or wagon and take the sag out of it when the vehicle is loaded or towing. Pressure is adjustable from 5 to 35psi, so the same car can ride softly empty and sit level with a van on the back.\u003c\/p\u003e\u003cp\u003eThe bag is moulded polyurethane, 3 to 4mm thick, which is what lets it live inside a coil without being cut by a stone. Fitting needs basic tools and the kit comes with everything: two air springs, two valves, airline, fittings, hardware and instructions.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuits standard height\u003c\/li\u003e\n\u003cli\u003eListed by Polyair for: Suzuki Jimny 1998 - 2018\u003c\/li\u003e\n\u003cli\u003ePart number 63593\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete airbag kit for one vehicle: two air springs, two valves, airline, fittings, mounting hardware and instructions.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Polyair warranty applies.\u003c\/p\u003e","brand":"Polyair","offers":[{"title":"Default Title","offer_id":50559712034895,"sku":"63593","price":355.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/63593_029b193d-2a95-4ff7-8ae7-7c9d5592a3b6.jpg?v=1790568020"},{"product_id":"polyair-63790","title":"Polyair Red Series Airbag Kit - Suzuki Jimny 3 Door, Suzuki Vitara \/ Grand Vitara (standard height)","description":"\u003cp\u003ePolyair Red Series Airbag Kit for the Suzuki Jimny 3 Door, Suzuki Vitara \/ Grand Vitara (standard height).\u003c\/p\u003e\u003ch3\u003eAbout the Polyair Red Series\u003c\/h3\u003e\u003cp\u003eThe Red Series is Polyair's in-coil airbag, made to sit inside the rear coil spring of a four wheel drive, ute or wagon and take the sag out of it when the vehicle is loaded or towing. Pressure is adjustable from 5 to 35psi, so the same car can ride softly empty and sit level with a van on the back.\u003c\/p\u003e\u003cp\u003eThe bag is moulded polyurethane, 3 to 4mm thick, which is what lets it live inside a coil without being cut by a stone. Fitting needs basic tools and the kit comes with everything: two air springs, two valves, airline, fittings, hardware and instructions.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuits standard height\u003c\/li\u003e\n\u003cli\u003eListed by Polyair for: Suzuki Jimny 3 Door 2019+; Suzuki Vitara \/ Grand Vitara 1998 - 2006\u003c\/li\u003e\n\u003cli\u003ePart number 63790\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete airbag kit for one vehicle: two air springs, two valves, airline, fittings, mounting hardware and instructions.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Polyair warranty applies.\u003c\/p\u003e","brand":"Polyair","offers":[{"title":"Default Title","offer_id":50559712100431,"sku":"63790","price":355.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/63790_abc24f33-8a1e-4894-a82b-004a5a8b2267.jpg?v=1790568020"},{"product_id":"polyair-63891","title":"Polyair Red Series Airbag Kit - Suzuki Jimny 5 Door (2 inch lift)","description":"\u003cp\u003ePolyair Red Series Airbag Kit for the Suzuki Jimny 5 Door (2 inch lift).\u003c\/p\u003e\u003ch3\u003eAbout the Polyair Red Series\u003c\/h3\u003e\u003cp\u003eThe Red Series is Polyair's in-coil airbag, made to sit inside the rear coil spring of a four wheel drive, ute or wagon and take the sag out of it when the vehicle is loaded or towing. Pressure is adjustable from 5 to 35psi, so the same car can ride softly empty and sit level with a van on the back.\u003c\/p\u003e\u003cp\u003eThe bag is moulded polyurethane, 3 to 4mm thick, which is what lets it live inside a coil without being cut by a stone. Fitting needs basic tools and the kit comes with everything: two air springs, two valves, airline, fittings, hardware and instructions.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuits 2 inch lift\u003c\/li\u003e\n\u003cli\u003eListed by Polyair for: Suzuki Jimny 5 Door 2024+\u003c\/li\u003e\n\u003cli\u003ePart number 63891\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete airbag kit for one vehicle: two air springs, two valves, airline, fittings, mounting hardware and instructions.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Polyair warranty applies.\u003c\/p\u003e","brand":"Polyair","offers":[{"title":"Default Title","offer_id":50559712133199,"sku":"63891","price":355.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/63891_705bda34-52ad-4d0d-a2ea-52c4b5154b6d.jpg?v=1790568020"},{"product_id":"polyair-63990","title":"Polyair Red Series Airbag Kit - Suzuki Jimny 3 Door, Suzuki Jimny 5 Door and 1 more (2 inch lift)","description":"\u003cp\u003ePolyair Red Series Airbag Kit for the Suzuki Jimny 3 Door, Suzuki Jimny 5 Door and 1 more (2 inch lift).\u003c\/p\u003e\u003ch3\u003eAbout the Polyair Red Series\u003c\/h3\u003e\u003cp\u003eThe Red Series is Polyair's in-coil airbag, made to sit inside the rear coil spring of a four wheel drive, ute or wagon and take the sag out of it when the vehicle is loaded or towing. Pressure is adjustable from 5 to 35psi, so the same car can ride softly empty and sit level with a van on the back.\u003c\/p\u003e\u003cp\u003eThe bag is moulded polyurethane, 3 to 4mm thick, which is what lets it live inside a coil without being cut by a stone. Fitting needs basic tools and the kit comes with everything: two air springs, two valves, airline, fittings, hardware and instructions.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuits 2 inch lift\u003c\/li\u003e\n\u003cli\u003e105mm i.d rear springs\u003c\/li\u003e\n\u003cli\u003eListed by Polyair for: Suzuki Jimny 3 Door 2019+; Suzuki Jimny 5 Door 2024+; Suzuki Vitara \/ Grand Vitara 1998 - 2006\u003c\/li\u003e\n\u003cli\u003ePart number 63990\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete airbag kit for one vehicle: two air springs, two valves, airline, fittings, mounting hardware and instructions.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Polyair warranty applies.\u003c\/p\u003e","brand":"Polyair","offers":[{"title":"Default Title","offer_id":50559712165967,"sku":"63990","price":355.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/63990_d3435cdd-9010-4109-8db6-06e8c43dd090.jpg?v=1790568020"},{"product_id":"polyair-63890","title":"Polyair Red Series Airbag Kit - Suzuki Jimny 3 Door, Suzuki Jimny 5 Door (20-40mm lift)","description":"\u003cp\u003ePolyair Red Series Airbag Kit for the Suzuki Jimny 3 Door, Suzuki Jimny 5 Door (20-40mm lift).\u003c\/p\u003e\u003ch3\u003eAbout the Polyair Red Series\u003c\/h3\u003e\u003cp\u003eThe Red Series is Polyair's in-coil airbag, made to sit inside the rear coil spring of a four wheel drive, ute or wagon and take the sag out of it when the vehicle is loaded or towing. Pressure is adjustable from 5 to 35psi, so the same car can ride softly empty and sit level with a van on the back.\u003c\/p\u003e\u003cp\u003eThe bag is moulded polyurethane, 3 to 4mm thick, which is what lets it live inside a coil without being cut by a stone. Fitting needs basic tools and the kit comes with everything: two air springs, two valves, airline, fittings, hardware and instructions.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuits 20-40mm lift\u003c\/li\u003e\n\u003cli\u003eListed by Polyair for: Suzuki Jimny 3 Door 2019+; Suzuki Jimny 5 Door 2024+\u003c\/li\u003e\n\u003cli\u003ePart number 63890\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete airbag kit for one vehicle: two air springs, two valves, airline, fittings, mounting hardware and instructions.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Polyair warranty applies.\u003c\/p\u003e","brand":"Polyair","offers":[{"title":"Default Title","offer_id":50559712231503,"sku":"63890","price":355.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/63890_11439761-2e05-4110-a552-2c748cb77e7d.jpg?v=1790568020"}],"url":"https:\/\/www.heasmans.com.au\/collections\/suzuki-jimny.oembed","provider":"Heasmans","version":"1.0","type":"link"}