{"title":"Porsche 911 GT3 RS (991.2)","description":"\u003cp\u003eExhaust for the Porsche 911 GT3 RS (991.2) from Akrapovič. Fitted at Sydenham or shipped Australia wide.\u003c\/p\u003e","products":[{"product_id":"akrapovic-evolution-header-set-titanium-for-opf-porsche-911-speedster-gt3-rs-991-2-e-po-t-6-1","title":"Akrapovic Evolution Header Set (Titanium) - Porsche 911 GT3 RS, Speedster (991.2)","description":"\u003cp\u003eAkrapovic Evolution Header Set (Titanium) for the Porsche 911 GT3 RS, Speedster (991.2).\u003c\/p\u003e\u003ch3\u003eAbout Akrapovič headers\u003c\/h3\u003e\u003cp\u003eAkrapovič headers replace the factory manifolds, matched to their own systems and to the engine's firing order so the gas pulses arrive without fighting each other.\u003c\/p\u003e\u003cp\u003eEvolution Header Set (Titanium) must be mounted together with Slip-On Line (Titanium) system S-PO\/TI\/15 or Slip-On Race Line (Titanium) system S-PO\/TI\/8. An additional original Porsche stock bracket (Porsche p\/n: 99111147391) is required for mounting the Akrapovic exhaust system. Please read the instructions carefully before the start of the installation.\u003c\/p\u003e\u003cp\u003eEvolution Header Set converts the slip-on system into a full system designed to give noticeably increased power at higher revs. Handcrafted titanium headers incorporate 100 cpsi sports catalytic convertors and side mufflers—all designed to increase power and torque—the Evolution Header Set utilizes integrated catalytic convertors and the functionality of the exhaust valves to deliver an out-and-out attack on the senses. With the valves in the open position, it delivers a sportier and hard-hitting sound, but also has the option of a lower sound level when the valves are closed, perfect for use in more everyday locations. Offering an increased weight savings in the area behind the engine and the rear axle, the reduction will enhance the handling and improve performance.\u003c\/p\u003e\u003cp\u003eWhen installing Akrapovic aftermarket optional link pipes with sports catalytic converters or without catalytic converters, which are developed for use on closed tracks only, remapping the ECU is mandatory. When installing Akrapovic aftermarket exhaust system that was developed for use on closed tracks, we recommend remapping the ECU in order to prevent potential »check engine light« warning signals.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePower: 385.6 kW at 8,350 rpm standard, 394.4 kW at 8,400 rpm with Akrapovič, up to + 10.0 kW at 6,550 rpm\u003c\/li\u003e\n\u003cli\u003eTorque: 483.7 Nm at 6,050 rpm standard, 497.5 Nm at 6,000 rpm with Akrapovič, up to + 28.9 Nm at 2,100 rpm\u003c\/li\u003e\n\u003cli\u003eNote: An additional original Porsche stock bracket (Porsche p\/n: 99111147391) is required for mounting the Akrapovic exhaust system.\u003c\/li\u003e\n\u003cli\u003eListed by Akrapovič for: Porsche 911 (991.2) Convertible Speedster 2019-2019; Porsche - 911 GT3 RS (991.2) - OPF\/GPF (2019 - 2020)Porsche - 911 Speedster - OPF\/GPF (2019 - 2020)\u003c\/li\u003e\n\u003cli\u003ePart number E-PO\/T\/6\/1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePorsche 911, 2019 to 2019\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne evolution header set (titanium), as described above.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eThis product does not meet emission compliance requirements for street or highway use.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":46849038778447,"sku":"E-PO\/T\/6\/1","price":21139.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/AKR-0008156.png?v=1789965831"},{"product_id":"akrapovic-rear-carbon-fibre-diffuser-gloss-for-porsche-911-2-gt3-rs-di-po-ca-7-g","title":"Akrapovic Rear Carbon Fibre Diffuser - Gloss - Porsche 911 GT3 RS (991.2)","description":"\u003cp\u003eAkrapovic Rear Carbon Fibre Diffuser for the Gloss - Porsche 911 GT3 RS (991.2).\u003c\/p\u003e\u003ch3\u003eAbout Akrapovič carbon parts\u003c\/h3\u003e\u003cp\u003eAkrapovič carbon parts are made from the same pre-preg carbon used across their range, finished in matte or gloss to match the system and the car. This is bodywork rather than exhaust, made to the same standard.\u003c\/p\u003e\u003cp\u003eDesigned to make the GT3 RS stand out from the crowd even more, the visual delight of Akrapovic exhaust systems can be further enhanced with the addition of an optional, ABE type-approved carbon fibre rear diffuser. It’s beautifully handcrafted from the finest materials and is designed to enhance the exclusive look of the titanium tailpipes. Available in high gloss finish.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNote: Diffuser DI-PO\/CA\/7\/G has to be used with tail pipe set TP-T\/S\/17 or TP-T\/S\/17\/H.\u003c\/li\u003e\n\u003cli\u003eListed by Akrapovič for: Porsche 911 (991.2) Coupe GT3 RS 2018-2019; Porsche - 911 GT3 RS (991.2) (2018 - 2020)Porsche - 911 GT3 RS (991.2) - OPF\/GPF (2019 - 2020)\u003c\/li\u003e\n\u003cli\u003ePart number DI-PO\/CA\/7\/G\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePorsche 911, 2018 to 2019\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne rear carbon fibre diffuser, as described above.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":46849039007823,"sku":"DI-PO\/CA\/7\/G","price":5549.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/AKR-0008106.png?v=1789965831"},{"product_id":"akrapovic-evolution-header-set-titanium-for-porsche-991-2-gt3-rs-e-po-t-4","title":"Akrapovic Evolution Header Set (Titanium) - Porsche 911 GT3 RS, GT3, GT3 Touring (991, 991.2)","description":"\u003cp\u003eAkrapovic Evolution Header Set (Titanium) for the Porsche 911 GT3 RS, GT3, GT3 Touring (991, 991.2).\u003c\/p\u003e\u003ch3\u003eAbout Akrapovič headers\u003c\/h3\u003e\u003cp\u003eAkrapovič headers replace the factory manifolds, matched to their own systems and to the engine's firing order so the gas pulses arrive without fighting each other.\u003c\/p\u003e\u003cp\u003eEvolution Header Set converts the slip-on system into a full Evolution Line system designed to give noticeably increased power at higher revs. With superb attention to detail, including parts cast in Akrapovic’s own titanium foundry, the craftsmanship and coating finish on the system is a joy to behold. With a newly developed exhaust manifold, incorporating 100 cpsi sports catalytic convertors and side mufflers—all designed to increase power and torque—the Evolution Line utilizes integrated catalytic convertors and the functionality of the new exhaust valves to deliver an out-and-out attack on the senses. With the valves in the open position, the Evolution Line sounds like the top-performing Evolution Race system, but also has the option of a lower sound level when the valves are closed, perfect for use in more everyday locations. Offering an increased weight savings in the area behind the engine and the rear axle, the reduction will enhance the handling and improve performance. The Evolution Line is also tuned to deliver a sportier and hard-hitting sound—in open valve mode, the more the engine is revved the better the sound gets—as well as increasing performance, all to provide an even greater sensory experience.\u003c\/p\u003e\u003cp\u003eWhen installing Akrapovic aftermarket optional link pipes with sports catalytic converters or without catalytic converters, which are developed for use on closed tracks only, remapping the ECU is mandatory. When installing Akrapovic aftermarket exhaust system that was developed for use on closed tracks, we recommend remapping the ECU in order to prevent potential »check engine light« warning signals.\u003c\/p\u003e\u003cp\u003ePorsche 911 (991.1) Coupe GT3 2014-2016Porsche 911 (991.1) Coupe GT3 RS 2015-2016Porsche 911 (991.2) Coupe GT3 2017-2019Porsche 911 (991.2) Coupe GT3 Touring 2018-2019\u003c\/p\u003e\u003cp\u003ePorsche - 911 GT3 RS (991) (2014 - 2017)Porsche - 911 GT3 (991) (2014 - 2017)Porsche - 911 GT3 RS (991.2) (2018 - 2020)Porsche - 911 GT3 \/ GT3 Touring (991.2) (2018 - 2019)\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePower: 345.7 kW at 8,450 rpm standard, 351.2 kW at 8,400 rpm with Akrapovič, up to + 10.0 kW at 8,000 rpm\u003c\/li\u003e\n\u003cli\u003eTorque: 426.2 Nm at 6,450 rpm standard, 437.4 Nm at 6,350 rpm with Akrapovič, up to + 27.3 Nm at 3,850 rpm\u003c\/li\u003e\n\u003cli\u003eWeight: 38.9 kg standard, 24.8 kg with Akrapovič, 14.1 kg saved\u003c\/li\u003e\n\u003cli\u003eWeight saving: 36.2%\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 200 minutes\u003c\/li\u003e\n\u003cli\u003ePart number E-PO\/T\/4\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePorsche 911, 2014 to 2019\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne evolution header set (titanium), as described above.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eThis product does not meet emission compliance requirements for street or highway use.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":46849039859791,"sku":"E-PO\/T\/4","price":21229.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/AKR-0008154.png?v=1789965835"},{"product_id":"akrapovic-evolution-race-header-set-titanium-for-porsche-991-2-gt3-rs-e-po-t-5","title":"Akrapovic Evolution Race Header Set (Titanium) - Porsche 911 GT3 RS, GT3, GT3 Touring (991, 991.2)","description":"\u003cp\u003eAkrapovic Evolution Race Header Set (Titanium) for the Porsche 911 GT3 RS, GT3, GT3 Touring (991, 991.2).\u003c\/p\u003e\u003ch3\u003eAbout Akrapovič headers\u003c\/h3\u003e\u003cp\u003eAkrapovič headers replace the factory manifolds, matched to their own systems and to the engine's firing order so the gas pulses arrive without fighting each other.\u003c\/p\u003e\u003cp\u003eEvolution Race Header Set converts the slip-on system into a full system, built for the track and gives the Porsche GT3 RS the extra performance to match. Beautifully made from hi-grade titanium and with a coating, the Evolution Race Line is as striking to look at as it is use. From the handcrafted titanium headers with 100 cpsi sports catalytic convertors and titanium flanges—cast in Akrapovic’s own foundry—right through to the superbly finished round titanium tailpipes, the Evolution Race Line is pure quality. The system offers a perfect power curve right from 3,000 rpm to the very top of the power band, designed to continually increase performance as the revs rise. Along with improved torque and the maximum weight savings to enhance handling, the Evolution Race Line exhaust system will have the car performing like a true cup racer—with a deep, loud, and powerful Akrapovic racing sound to match its performance.\u003c\/p\u003e\u003cp\u003eWhen installing Akrapovic aftermarket optional link pipes with sports catalytic converters or without catalytic converters, which are developed for use on closed tracks only, remapping the ECU is mandatory. When installing Akrapovic aftermarket exhaust system that was developed for use on closed tracks, we recommend remapping the ECU in order to prevent potential »check engine light« warning signals.\u003c\/p\u003e\u003cp\u003ePorsche 911 (991.1) Coupe GT3 2014-2016Porsche 911 (991.1) Coupe GT3 RS 2015-2016Porsche 911 (991.2) Coupe GT3 2017-2019Porsche 911 (991.2) Coupe GT3 Touring 2018-2019\u003c\/p\u003e\u003cp\u003ePorsche - 911 GT3 RS (991) (2014 - 2017)Porsche - 911 GT3 (991) (2014 - 2017)Porsche - 911 GT3 RS (991.2) (2018 - 2020)Porsche - 911 GT3 \/ GT3 Touring (991.2) (2018 - 2019)\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePower: 345.7 kW at 8,450 rpm standard, 354.2 kW at 8,400 rpm with Akrapovič, up to + 19.9 kW at 3,950 rpm\u003c\/li\u003e\n\u003cli\u003eTorque: 426.2 Nm at 6,450 rpm standard, 436.7 Nm at 6,400 rpm with Akrapovič, up to + 50.6 Nm at 3,900 rpm\u003c\/li\u003e\n\u003cli\u003eWeight: 38.9 kg standard, 7.0 kg with Akrapovič, 31.9 kg saved\u003c\/li\u003e\n\u003cli\u003eWeight saving: 81.9%\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 200 minutes\u003c\/li\u003e\n\u003cli\u003ePart number E-PO\/T\/5\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePorsche 911, 2014 to 2019\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne evolution race header set (titanium), as described above.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eThis product does not meet emission compliance requirements for street or highway use.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":46849040154703,"sku":"E-PO\/T\/5","price":14639.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/AKR-0008155.png?v=1789965836"},{"product_id":"akrapovic-slip-on-line-titanium-for-porsche-911-gt3-gt3-touring-gt3-rs-991-2-s-po-ti-10h","title":"Akrapovic Slip-On Line (Titanium) - Porsche 911 GT3, GT3 Touring, GT3 RS (991.2)","description":"\u003cp\u003eAkrapovic Slip-On Line (Titanium) for the Porsche 911 GT3, GT3 Touring, GT3 RS (991.2).\u003c\/p\u003e\u003ch3\u003eAbout the Slip-On Line\u003c\/h3\u003e\u003cp\u003eA Slip-On Line replaces the rear section of the factory system, so it fits without touching the catalysts or the pipework ahead of them. It is the straightforward way to get the Akrapovič sound and the weight saving without changing the car's emissions equipment.\u003c\/p\u003e\u003cp\u003eMost Slip-On systems carry ECE type approval, which matters if the car has to stay road legal. Fitting an optional link pipe usually voids that approval, and the product says so where it applies.\u003c\/p\u003e\u003cp\u003eTo fit this part you also need: Titanium Tail Pipe Set; Rear Carbon Fibre Diffuser - Gloss.Buy it as a complete kit: Akrapovic Exhaust System - Porsche 911 GT3, GT3 Touring, GT3 RS (991.2) [AKRA-POR-12-KIT], Akrapovic Exhaust System - Porsche 911 GT3, GT3 Touring, GT3 RS (991.2) [S-PO\/TI\/10H-GT3-KIT], Akrapovic Exhaust System - Porsche 911 GT3, GT3 Touring, GT3 RS (991.2) [S-PO\/TI\/10H-GT3RS-KIT].The mandatory tail pipe set TP-T\/S\/17\/H needs to be ordered separately.\u003c\/p\u003e\u003cp\u003eAkrapovic’s Slip-On Line represents the first step in the exhaust system tuning process and the muffler can easily be installed onto the Porsche GT3’s original system. Built from hi-grade titanium and finished with two eye-catching double round tailpipes, this entry system makes the GT3 more powerful and lighter, and gives the car that unique Akrapovic sound, while still meeting ECE specifications.\u003c\/p\u003e\u003cp\u003eThe mandatory tail pipe set TP-T\/S\/17\/H needs to be ordered separately.\u003c\/p\u003e\u003cp\u003eThe Slip-On system can be optionally combined with Link Pipe Set (Titanium) that retains stock headers and removes stock side mufflers, or it can be upgraded into a full Akrapovic exhaust system, either with combining it with Evolution Race Header Set without valves or Evolution Header Set with side mufflers and valves. If the system is upgraded with link pipe or evolution sets, the ECE type approval is not valid anymore.\u003c\/p\u003e\u003cp\u003eThe look of this system can be further enhanced with the addition of the superbly handcrafted high-quality optional carbon- fibre rear diffuser in matte and high gloss finish to give even more exclusivity to the Porsche 911 GT3 (991.2).\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePower: 367.0 kW at 8,700 rpm standard, 368.8 kW at 8,600 rpm with Akrapovič, up to + 4.6 kW at 4,200 rpm\u003c\/li\u003e\n\u003cli\u003eTorque: 454.1 Nm at 6,600 rpm standard, 458.1 Nm at 6,300 rpm with Akrapovič, up to + 10.4 Nm at 4,200 rpm\u003c\/li\u003e\n\u003cli\u003eWeight: 8.6 kg standard, 7.2 kg with Akrapovič, 1.4 kg saved\u003c\/li\u003e\n\u003cli\u003eWeight saving: 16.1%\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 260 minutes\u003c\/li\u003e\n\u003cli\u003eListed by Akrapovič for: Porsche 911 (991.2) Coupe GT3 2017-2019Porsche 911 (991.2) Coupe GT3 Touring 2018-2019; Porsche - 911 GT3 \/ GT3 Touring (991.2) (2018 - 2019)Porsche - 911 GT3 RS (991.2) (2018 - 2020)\u003c\/li\u003e\n\u003cli\u003ePart number S-PO\/TI\/10H\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePorsche 911, 2017 to 2019\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne slip-on line (titanium), as described above.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":46849057751119,"sku":"S-PO\/TI\/10H","price":10419.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/360_F_504289605_zehJiK0tCuZLP2MdfFBpcJdOVxKLnXg1_2a40b938-a973-416c-b939-b91785e01b52.jpg?v=1789965856"},{"product_id":"akrapovic-slip-on-line-titanium-for-opf-porsche-911-speedster-gt3-rs-991-2-s-po-ti-15","title":"Akrapovic Slip-On Line (Titanium) - Porsche 911 GT3 RS, Speedster (991.2)","description":"\u003cp\u003eAkrapovic Slip-On Line (Titanium) for the Porsche 911 GT3 RS, Speedster (991.2).\u003c\/p\u003e\u003ch3\u003eAbout the Slip-On Line\u003c\/h3\u003e\u003cp\u003eA Slip-On Line replaces the rear section of the factory system, so it fits without touching the catalysts or the pipework ahead of them. It is the straightforward way to get the Akrapovič sound and the weight saving without changing the car's emissions equipment.\u003c\/p\u003e\u003cp\u003eMost Slip-On systems carry ECE type approval, which matters if the car has to stay road legal. Fitting an optional link pipe usually voids that approval, and the product says so where it applies.\u003c\/p\u003e\u003cp\u003eTo fit this part you also need: Evolution Header Set (Titanium); Titanium Tail Pipe Set; Rear Carbon Fibre Diffuser - Gloss.Buy it as a complete kit: Akrapovic Exhaust System - Porsche 911 GT3 RS, Speedster, GT3, GT3 Touring (991.2), Akrapovic Exhaust System - Porsche 911 GT3 RS, Speedster, GT3 (991.2, 991).- An additional original Porsche stock bracket (Porsche p\/n: 99111147391) is required for mounting the Akrapovic exhaust system.\u003c\/p\u003e\u003cp\u003eSlip-on system (S-PO\/TI\/15) for GT3 RS \/ Speedster OPF model must be mandatory combined with:\u003c\/p\u003e\u003cp\u003e- Evolution Header Set (E-PO\/T\/6\/1)\u003c\/p\u003e\u003cp\u003e- Tail pipe set TP-T\/S\/19. When combining the slip-on system with optional carbon fibre diffuser DI-PO\/CA\/7\/G (fits on GT3 RS), you must use tail pipe set TP-T\/S\/17.\u003c\/p\u003e\u003cp\u003e- An additional original Porsche stock bracket (Porsche p\/n: 99111147391) is required for mounting the Akrapovic exhaust system. Please read the instructions carefully before the start of the installation.\u003c\/p\u003e\u003cp\u003eThis Slip-On system (S-PO\/TI\/15) must be upgraded into a full Akrapovic Evolution Line exhaust system by combining it with the Evolution Header Set (E-PO\/T\/6) with side mufflers and valves, which is designed to unleash the system’s full potential and enhance the performance of the car as the revs rise. With superb attention to detail, including parts cast in Akrapovic’s own titanium foundry, the craftsmanship and coating finish on the system is a joy to behold. With an exhaust manifold incorporating 100 cpsi sports catalytic convertors and side mufflers, the Evolution Line utilizes integrated catalytic convertors and the functionality of the exhaust valves to deliver an out-and-out attack on the senses. It offers increased weight savings in the area behind the engine and rear axle. The Evolution Line is also tuned to deliver a sporty and hard-hitting sound. The more the engine is revved and the acceleration builds, the six-cylinder engine sound delivers a rich, harmonic, and high-frequency soundtrack, making every journey a memorable experience and one that continues even after the throttle is released, providing a full and rewarding sensory experience.\u003c\/p\u003e\u003cp\u003eWhen installing Akrapovic aftermarket optional link pipes with sports catalytic converters or without catalytic converters, which are developed for use on closed tracks only, remapping the ECU is mandatory. When installing Akrapovic aftermarket exhaust system that was developed for use on closed tracks, we recommend remapping the ECU in order to prevent potential »check engine light« warning signals.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eListed by Akrapovič for: Porsche 911 (991.2) Convertible Speedster 2019-2019; Porsche - 911 GT3 RS (991.2) - OPF\/GPF (2019 - 2020)Porsche - 911 Speedster - OPF\/GPF (2019 - 2020)\u003c\/li\u003e\n\u003cli\u003ePart number S-PO\/TI\/15\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePorsche 911, 2019 to 2019\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne slip-on line (titanium), as described above.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eThis product does not meet emission compliance requirements for street or highway use.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":46849058865231,"sku":"S-PO\/TI\/15","price":10479.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/360_F_504289605_zehJiK0tCuZLP2MdfFBpcJdOVxKLnXg1_9447f814-3f95-4dbe-a99f-f907d258b00f.jpg?v=1789965857"},{"product_id":"akrapovic-slip-on-race-line-titanium-for-porsche-911-gt3-gt3-touring-gt3-rs-991-s-po-ti-8","title":"Akrapovic Slip-On Race Line (Titanium) - Porsche 911 GT3 RS, GT3, GT3 Touring, Speedster (991.2, 991)","description":"\u003cp\u003eAkrapovic Slip-On Race Line (Titanium) for the Porsche 911 GT3 RS, GT3, GT3 Touring, Speedster (991.2, 991).\u003c\/p\u003e\u003ch3\u003eAbout the Slip-On Line\u003c\/h3\u003e\u003cp\u003eA Slip-On Line replaces the rear section of the factory system, so it fits without touching the catalysts or the pipework ahead of them. It is the straightforward way to get the Akrapovič sound and the weight saving without changing the car's emissions equipment.\u003c\/p\u003e\u003cp\u003eMost Slip-On systems carry ECE type approval, which matters if the car has to stay road legal. Fitting an optional link pipe usually voids that approval, and the product says so where it applies.\u003c\/p\u003e\u003cp\u003eTo fit this part you also need: Titanium Tail Pipe Set; Rear Carbon Fibre Diffuser - Gloss.Buy it as a complete kit: Akrapovic Exhaust System - Porsche 911 GT3 RS, GT3, GT3 Touring, Speedster (991.2, 991) [AKRA-POR-14-KIT], Akrapovic Exhaust System - Porsche 911 GT3 RS, GT3, GT3 Touring, Speedster (991.2, 991) [AKRA-POR-18-KIT], Akrapovic Race Line Exhaust System - Porsche 911 GT3 RS, GT3, GT3 Touring, Speedster (991.2, 991) [S-PO\/TI\/8-GT3-V1-KIT], Akrapovic Race Line Exhaust System - Porsche 911 GT3 RS, GT3, GT3 Touring, Speedster (991.2, 991) [S-PO\/TI\/8-GT3-V2-KIT], Akrapovic Race Line Exhaust System - Porsche 911 GT3 RS, GT3, GT3 Touring, Speedster (991.2, 991) [S-PO\/TI\/8-GT3RS-KIT], Akrapovic Race Line Exhaust System - Porsche 911 GT3 RS, GT3, GT3 Touring, Speedster (991.2, 991) [S-PO\/TI\/8-OPF-KIT].The mandatory tail pipe set TP-T\/S\/19 needs to be ordered separately.\u003c\/p\u003e\u003cp\u003eAkrapovic’s Slip-On Race Line represents the first step in the exhaust system tuning process and it can easily be installed onto the Porsche GT3 RS's original system. Built from hi-grade titanium and finished with two eye-catching double round tailpipes, this entry system makes the GT3 RS more powerful and lighter, and gives the car that unique, sporty Akrapovic sound.\u003c\/p\u003e\u003cp\u003eThe mandatory tail pipe set TP-T\/S\/19 needs to be ordered separately. When combining the slip-on system with optional carbon fibre diffuser DI-PO\/CA\/7\/G, you must use tail pipe set TP-T\/S\/17\/H or TP-T\/S\/17.\u003c\/p\u003e\u003cp\u003eThe Slip-On Race system can be optionally combined with Link Pipe Set (Titanium) that retains stock headers and removes stock side mufflers, or it can be upgraded into a full Akrapovic exhaust system, either with combining it with Evolution Race Header Set without valves or Evolution Header Set with side mufflers and valves.\u003c\/p\u003e\u003cp\u003ePorsche 911 (991.1) Coupe GT3 2014-2016Porsche 911 (991.2) Convertible Speedster 2019-2019Porsche 911 (991.2) Coupe GT3 2017-2019Porsche 911 (991.2) Coupe GT3 RS 2018-2019Porsche 911 (991.2) Coupe GT3 Touring 2018-2019\u003c\/p\u003e\u003cp\u003ePorsche - 911 GT3 RS (991.2) (2018 - 2020)Porsche - 911 GT3 \/ GT3 Touring (991.2) (2018 - 2019)Porsche - 911 GT3 RS (991.2) - OPF\/GPF (2019 - 2020)Porsche - 911 Speedster - OPF\/GPF (2019 - 2020)Porsche - 911 GT3 (991) (2014 - 2017)\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePart number S-PO\/TI\/8\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePorsche 911, 2014 to 2019\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne slip-on race line (titanium), as described above.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eThis product does not meet emission compliance requirements for street or highway use.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":46849061027919,"sku":"S-PO\/TI\/8","price":5609.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/360_F_504289605_zehJiK0tCuZLP2MdfFBpcJdOVxKLnXg1_507a2313-5619-4c60-b6e4-b7b099832233.jpg?v=1789965861"},{"product_id":"akrapovic-titanium-tail-pipe-set-for-porsche-911-gt3-rs-991-2-tp-t-s-19-h","title":"Akrapovic Titanium Tail Pipe Set - Porsche 911 GT3 RS (991.2)","description":"\u003cp\u003eAkrapovic Titanium Tail Pipe Set for the Porsche 911 GT3 RS (991.2).\u003c\/p\u003e\u003ch3\u003eAbout Akrapovič tail pipes\u003c\/h3\u003e\u003cp\u003eAkrapovič tail pipes are the visible end of the system, made in titanium or carbon fibre to suit their own exhausts. They are chosen to match the system rather than fitted in isolation.\u003c\/p\u003e\u003cp\u003eTop the system off with a pair of eye-catching double round tailpipes, made of high-grade titanium. Made specifically for the GT3 RS (991.2) version.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eListed by Akrapovič for: Porsche - 911 GT3 RS (991.2) (2018 - 2020)\u003c\/li\u003e\n\u003cli\u003ePart number TP-T\/S\/19\/H\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne titanium tail pipe set, as described above.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":46849063059535,"sku":"TP-T\/S\/19\/H","price":2879.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/360_F_504289605_zehJiK0tCuZLP2MdfFBpcJdOVxKLnXg1_a07ef629-ef11-425a-9d5b-c12a1143d2a8.jpg?v=1789965864"},{"product_id":"akrapovic-titanium-tail-pipe-set-for-porsche-911-gt3-991-tp-t-s-19","title":"Akrapovic Titanium Tail Pipe Set - Porsche 911 GT3, GT3 RS, Speedster (991, 991.2)","description":"\u003cp\u003eAkrapovic Titanium Tail Pipe Set for the Porsche 911 GT3, GT3 RS, Speedster (991, 991.2).\u003c\/p\u003e\u003ch3\u003eAbout Akrapovič tail pipes\u003c\/h3\u003e\u003cp\u003eAkrapovič tail pipes are the visible end of the system, made in titanium or carbon fibre to suit their own exhausts. They are chosen to match the system rather than fitted in isolation.\u003c\/p\u003e\u003cp\u003eTop the system off with a pair of eye-catching double round tailpipes, made of high-grade titanium. Made specifically for the GT3 RS (991.2) version.\u003c\/p\u003e\u003cp\u003ePorsche - 911 GT3 (991) (2014 - 2017)Porsche - 911 GT3 RS (991.2) (2018 - 2020)Porsche - 911 GT3 RS (991.2) - OPF\/GPF (2019 - 2020)Porsche - 911 Speedster - OPF\/GPF (2019 - 2020)\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eListed by Akrapovič for: Porsche 911 (991.1) Coupe GT3 2014-2016Porsche 911 (991.2) Convertible Speedster 2019-2019Porsche 911 (991.2) Coupe GT3 RS 2018-2019\u003c\/li\u003e\n\u003cli\u003ePart number TP-T\/S\/19\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePorsche 911, 2014 to 2019\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne titanium tail pipe set, as described above.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":46849063845967,"sku":"TP-T\/S\/19","price":2879.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/360_F_504289605_zehJiK0tCuZLP2MdfFBpcJdOVxKLnXg1_316f3e31-b3ae-4063-8e69-b3c15f8d7df5.jpg?v=1789965865"},{"product_id":"akrapovic-titanium-tail-pipe-set-for-porsche-911-gt3-gt3-touring-991-2-tp-t-s-17-h","title":"Akrapovic Titanium Tail Pipe Set - Porsche 911 GT3 RS, GT3, GT3 Touring (991.2)","description":"\u003cp\u003eAkrapovic Titanium Tail Pipe Set for the Porsche 911 GT3 RS, GT3, GT3 Touring (991.2).\u003c\/p\u003e\u003ch3\u003eAbout Akrapovič tail pipes\u003c\/h3\u003e\u003cp\u003eAkrapovič tail pipes are the visible end of the system, made in titanium or carbon fibre to suit their own exhausts. They are chosen to match the system rather than fitted in isolation.\u003c\/p\u003e\u003cp\u003eTop the system off with a pair of eye-catching double round tailpipes, made of high-grade titanium.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFitment notice for GT3 RS model: This tail pipe set is to be used with optional carbon diffuser DI-PO\/CA\/7\/G only.\u003c\/li\u003e\n\u003cli\u003eListed by Akrapovič for: Porsche 911 (991.2) Coupe GT3 2017-2019Porsche 911 (991.2) Coupe GT3 Touring 2018-2019; Porsche - 911 GT3 RS (991.2) (2018 - 2020)Porsche - 911 GT3 \/ GT3 Touring (991.2) (2018 - 2019)\u003c\/li\u003e\n\u003cli\u003ePart number TP-T\/S\/17\/H\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePorsche 911, 2017 to 2019\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne titanium tail pipe set, as described above.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":46849063911503,"sku":"TP-T\/S\/17\/H","price":2879.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/360_F_504289605_zehJiK0tCuZLP2MdfFBpcJdOVxKLnXg1_ea235e00-375e-465f-84fa-e080e42ec30f.jpg?v=1789965865"},{"product_id":"akrapovic-titanium-tail-pipe-set-for-porsche-911-gt3-gt3-touring-991-2-tp-t-s-17","title":"Akrapovic Titanium Tail Pipe Set - Porsche 911 GT3 RS, Speedster, GT3, GT3 Touring (991.2)","description":"\u003cp\u003eAkrapovic Titanium Tail Pipe Set for the Porsche 911 GT3 RS, Speedster, GT3, GT3 Touring (991.2).\u003c\/p\u003e\u003ch3\u003eAbout Akrapovič tail pipes\u003c\/h3\u003e\u003cp\u003eAkrapovič tail pipes are the visible end of the system, made in titanium or carbon fibre to suit their own exhausts. They are chosen to match the system rather than fitted in isolation.\u003c\/p\u003e\u003cp\u003eTop the system off with a pair of eye-catching double round tailpipes, made of high-grade titanium.\u003c\/p\u003e\u003cp\u003ePorsche 911 (991.2) Convertible Speedster 2019-2019Porsche 911 (991.2) Coupe GT3 2017-2019Porsche 911 (991.2) Coupe GT3 RS 2018-2019Porsche 911 (991.2) Coupe GT3 Touring 2018-2019\u003c\/p\u003e\u003cp\u003ePorsche - 911 GT3 RS (991.2) (2018 - 2020)Porsche - 911 GT3 RS (991.2) - OPF\/GPF (2019 - 2020)Porsche - 911 Speedster - OPF\/GPF (2019 - 2020)Porsche - 911 GT3 \/ GT3 Touring (991.2) (2018 - 2019)\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFitment notice for GT3 RS model: This tail pipe set is to be used with optional carbon diffuser DI-PO\/CA\/7\/G only.\u003c\/li\u003e\n\u003cli\u003ePart number TP-T\/S\/17\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePorsche 911, 2017 to 2019\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne titanium tail pipe set, as described above.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":46849063944271,"sku":"TP-T\/S\/17","price":2879.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/360_F_504289605_zehJiK0tCuZLP2MdfFBpcJdOVxKLnXg1_1bd89842-4580-4219-b39c-92db4f4fd20a.jpg?v=1789965865"},{"product_id":"akrapovic-titanium-db-reducer-for-911-gt3-rs-991-tp-po991gt3-box","title":"Akrapovic Titanium dB Reducer - Porsche 911 GT3, GT3 Touring, GT3 RS, S\/T (991, 991.2, 992)","description":"\u003cp\u003eAkrapovic Titanium dB Reducer for the Porsche 911 GT3, GT3 Touring, GT3 RS, S\/T (991, 991.2, 992).\u003c\/p\u003e\u003ch3\u003eAbout this part\u003c\/h3\u003e\u003cp\u003eAkrapovič make this part to suit their own systems, to the same standard as the exhausts themselves.\u003c\/p\u003e\u003cp\u003eDesigned and constructed exclusively for the Porsche 911 GT3 (991) and GT3 RS (991), the Akrapovic dB reducer (Titanium) is aimed at driving enthusiasts who need to keep the noise of the exhaust within approved levels during track-day use. Made from high-grade lightweight titanium, the dB reducer works like an additional muffler to allow extra expansion of the exhaust gases. It is easily fitted by simply removing the Akrapovic tailpipe set and then mounting the dB reducer in place. After installation, the Akrapovic dB reducer (Titanium) reduces dynamic sound levels* by approximately two or three decibels** while still retaining the unique Akrapovic sound and character. It is designed to fit and reduce the measured dynamic sound levels of all Akrapovic systems for the Porsche 911 GT3 (991) and GT3 RS: the Slip-On Line (Titanium), Evolution Line (Titanium), Sports Cup Line (Titanium), and Evolution Race Line (Titanium). The Akrapovic dB reducer (Titanium) is also totally compatible with the optional Akrapovic carbon-fibre diffuser, which is available for the Porsche 911 GT3 (991).\u003c\/p\u003e\u003cp\u003eThe Akrapovic dB reducer (Titanium) fits also to the stock exhaust system of the 911 GT3 (992) and GT3 RS (992).\u003c\/p\u003e\u003cp\u003e*Dynamic sound levels apply to a moving vehicle and not the volume from a static vehicle.\u003c\/p\u003e\u003cp\u003e**Noise reduction value is relative (or may vary) due to various noise-measuring methods used and external conditions at different racetracks.\u003c\/p\u003e\u003cp\u003ePorsche 911 (991.1) Coupe GT3 2014-2016Porsche 911 (991.1) Coupe GT3 RS 2015-2016Porsche 911 (991.2) Coupe GT3 2017-2019Porsche 911 (991.2) Coupe GT3 Touring 2018-2019Porsche 911 (992.1) Coupe GT3 2021-2024Porsche 911 (992.1) Coupe GT3 RS 2023-2024Porsche 911 (992.1) Coupe GT3 Touring 2022-2024Porsche 911 (992.1) Coupe S\/T 2024-2024\u003c\/p\u003e\u003cp\u003ePorsche - 911 GT3 (991) (2014 - 2017)Porsche - 911 GT3 \/ GT3 Touring (991.2) (2018 - 2019)Porsche - 911 GT3 \/ GT3 Touring (992) (2021 - 2024)Porsche - 911 GT3 RS (991.2) (2018 - 2020)Porsche - 911 GT3 RS (991) (2014 - 2017)Porsche - 911 GT3 RS \/ S\/T (992) (2022 - 2025)\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePart number TP-PO991GT3\/BOX\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePorsche 911, 2014 to 2024\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne titanium db reducer, as described above.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":46849064337487,"sku":"TP-PO991GT3\/BOX","price":3959.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/AKR-0010894.png?v=1789965870"},{"product_id":"akrapovic-exhaust-system-akra-por-12-kit","title":"Akrapovic Exhaust System - Porsche 911 GT3, GT3 Touring, GT3 RS (991.2)","description":"\u003cp\u003eAkrapovic Exhaust System for the Porsche 911 GT3, GT3 Touring, GT3 RS (991.2).\u003c\/p\u003e\u003ch3\u003eAbout Akrapovič exhaust systems\u003c\/h3\u003e\u003cp\u003eAn Akrapovič exhaust system replaces the factory system from the manifold or the catalyst back, and is developed for one car rather than adapted. The work goes into three things at once: how much the system weighs, how the gas flows through it, and what the car sounds like at every point in the rev range.\u003c\/p\u003e\u003cp\u003eComponents are made from titanium, stainless steel or Inconel depending on the system, with cast parts produced in Akrapovič's own foundry. The material for this system is named in the title and the specification.\u003c\/p\u003e\u003cp\u003eSlip-On Line (Titanium) (S-PO\/TI\/10H)Titanium Tail Pipe Set (TP-T\/S\/17\/H)Rear Carbon Fibre Diffuser - Gloss (DI-PO\/CA\/7\/G)\u003c\/p\u003e\u003cp\u003eEvolution Header Set (Titanium) (E-PO\/T\/4)Evolution Race Header Set (Titanium) (E-PO\/T\/5)Titanium dB Reducer (TP-PO991GT3\/BOX)Add-ons are not part of this kit or its price. Each is listed as its own product.\u003c\/p\u003e\u003cp\u003ePorsche - 911 GT3 \/ GT3 Touring (991.2) (2018 - 2019)Porsche - 911 GT3 RS (991.2) (2018 - 2020)Porsche - 911 GT3 RS (991.2) (2018 - 2020)Porsche - 911 GT3 \/ GT3 Touring (991.2) (2018 - 2019)Porsche - 911 GT3 RS (991.2) (2018 - 2020)Porsche - 911 GT3 RS (991.2) - OPF\/GPF (2019 - 2020)\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePart number AKRA-POR-12-KIT\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne exhaust system, as described above.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":46849080787023,"sku":"AKRA-POR-12-KIT","price":18847.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/360_F_504289605_zehJiK0tCuZLP2MdfFBpcJdOVxKLnXg1_c2a368b1-c784-4bc7-8375-09b278c9a24d.jpg?v=1789965898"},{"product_id":"akrapovic-exhaust-system-akra-por-14-kit","title":"Akrapovic Exhaust System - Porsche 911 GT3 RS, GT3, GT3 Touring, Speedster (991.2, 991) [AKRA-POR-14-KIT]","description":"\u003cp\u003eAkrapovic Exhaust System for the Porsche 911 GT3 RS, GT3, GT3 Touring, Speedster (991.2, 991).\u003c\/p\u003e\u003ch3\u003eAbout Akrapovič exhaust systems\u003c\/h3\u003e\u003cp\u003eAn Akrapovič exhaust system replaces the factory system from the manifold or the catalyst back, and is developed for one car rather than adapted. The work goes into three things at once: how much the system weighs, how the gas flows through it, and what the car sounds like at every point in the rev range.\u003c\/p\u003e\u003cp\u003eComponents are made from titanium, stainless steel or Inconel depending on the system, with cast parts produced in Akrapovič's own foundry. The material for this system is named in the title and the specification.\u003c\/p\u003e\u003cp\u003eSlip-On Race Line (Titanium) (S-PO\/TI\/8)Titanium Tail Pipe Set (TP-T\/S\/17)Rear Carbon Fibre Diffuser - Gloss (DI-PO\/CA\/7\/G)\u003c\/p\u003e\u003cp\u003eEvolution Header Set (Titanium) (E-PO\/T\/4)Evolution Race Header Set (Titanium) (E-PO\/T\/5)Titanium dB Reducer (TP-PO991GT3\/BOX)Add-ons are not part of this kit or its price. Each is listed as its own product.\u003c\/p\u003e\u003cp\u003ePorsche - 911 GT3 RS (991.2) (2018 - 2020)Porsche - 911 GT3 \/ GT3 Touring (991.2) (2018 - 2019)Porsche - 911 GT3 RS (991.2) - OPF\/GPF (2019 - 2020)Porsche - 911 Speedster - OPF\/GPF (2019 - 2020)Porsche - 911 GT3 (991) (2014 - 2017)Porsche - 911 GT3 RS (991.2) (2018 - 2020)Porsche - 911 GT3 RS (991.2) - OPF\/GPF (2019 - 2020)Porsche - 911 Speedster - OPF\/GPF (2019 - 2020)Porsche - 911 GT3 \/ GT3 Touring (991.2) (2018 - 2019)Porsche - 911 GT3 RS (991.2) (2018 - 2020)Porsche - 911 GT3 RS (991.2) - OPF\/GPF (2019 - 2020)\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eListed by Akrapovič for: Porsche 911 (991.2) Coupe GT3 RS 2018-2019\u003c\/li\u003e\n\u003cli\u003ePart number AKRA-POR-14-KIT\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePorsche 911, 2018 to 2019\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne exhaust system, as described above.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":46849080885327,"sku":"AKRA-POR-14-KIT","price":14037.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/360_F_504289605_zehJiK0tCuZLP2MdfFBpcJdOVxKLnXg1_55ca1a01-cc62-45f7-8856-39a0005a9a2c.jpg?v=1789965898"},{"product_id":"akrapovic-exhaust-system-akra-por-18-kit","title":"Akrapovic Exhaust System - Porsche 911 GT3 RS, GT3, GT3 Touring, Speedster (991.2, 991) [AKRA-POR-18-KIT]","description":"\u003cp\u003eAkrapovic Exhaust System for the Porsche 911 GT3 RS, GT3, GT3 Touring, Speedster (991.2, 991).\u003c\/p\u003e\u003ch3\u003eAbout Akrapovič exhaust systems\u003c\/h3\u003e\u003cp\u003eAn Akrapovič exhaust system replaces the factory system from the manifold or the catalyst back, and is developed for one car rather than adapted. The work goes into three things at once: how much the system weighs, how the gas flows through it, and what the car sounds like at every point in the rev range.\u003c\/p\u003e\u003cp\u003eComponents are made from titanium, stainless steel or Inconel depending on the system, with cast parts produced in Akrapovič's own foundry. The material for this system is named in the title and the specification.\u003c\/p\u003e\u003cp\u003eSlip-On Race Line (Titanium) (S-PO\/TI\/8)Evolution Header Set (Titanium) (E-PO\/T\/6\/1)Titanium Tail Pipe Set (TP-T\/S\/17)Rear Carbon Fibre Diffuser - Gloss (DI-PO\/CA\/7\/G)\u003c\/p\u003e\u003cp\u003ePorsche - 911 GT3 RS (991.2) (2018 - 2020)Porsche - 911 GT3 \/ GT3 Touring (991.2) (2018 - 2019)Porsche - 911 GT3 RS (991.2) - OPF\/GPF (2019 - 2020)Porsche - 911 Speedster - OPF\/GPF (2019 - 2020)Porsche - 911 GT3 (991) (2014 - 2017)Porsche - 911 GT3 RS (991.2) - OPF\/GPF (2019 - 2020)Porsche - 911 Speedster - OPF\/GPF (2019 - 2020)Porsche - 911 GT3 RS (991.2) (2018 - 2020)Porsche - 911 GT3 RS (991.2) - OPF\/GPF (2019 - 2020)Porsche - 911 Speedster - OPF\/GPF (2019 - 2020)Porsche - 911 GT3 \/ GT3 Touring (991.2) (2018 - 2019)Porsche - 911 GT3 RS (991.2) (2018 - 2020)Porsche - 911 GT3 RS (991.2) - OPF\/GPF (2019 - 2020)\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePart number AKRA-POR-18-KIT\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne exhaust system, as described above.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":46849080918095,"sku":"AKRA-POR-18-KIT","price":35176.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/360_F_504289605_zehJiK0tCuZLP2MdfFBpcJdOVxKLnXg1_86592a90-e6d4-4d06-9c69-af622fb90dea.jpg?v=1789965898"},{"product_id":"akrapovic-exhaust-system-akra-por-16-kit","title":"Akrapovic Exhaust System - Porsche 911 GT3 RS, Speedster, GT3, GT3 Touring (991.2)","description":"\u003cp\u003eAkrapovic Exhaust System for the Porsche 911 GT3 RS, Speedster, GT3, GT3 Touring (991.2).\u003c\/p\u003e\u003ch3\u003eAbout Akrapovič exhaust systems\u003c\/h3\u003e\u003cp\u003eAn Akrapovič exhaust system replaces the factory system from the manifold or the catalyst back, and is developed for one car rather than adapted. The work goes into three things at once: how much the system weighs, how the gas flows through it, and what the car sounds like at every point in the rev range.\u003c\/p\u003e\u003cp\u003eComponents are made from titanium, stainless steel or Inconel depending on the system, with cast parts produced in Akrapovič's own foundry. The material for this system is named in the title and the specification.\u003c\/p\u003e\u003cp\u003eSlip-On Line (Titanium) (S-PO\/TI\/15)Evolution Header Set (Titanium) (E-PO\/T\/6\/1)Titanium Tail Pipe Set (TP-T\/S\/17)Rear Carbon Fibre Diffuser - Gloss (DI-PO\/CA\/7\/G)\u003c\/p\u003e\u003cp\u003ePorsche - 911 GT3 RS (991.2) - OPF\/GPF (2019 - 2020)Porsche - 911 Speedster - OPF\/GPF (2019 - 2020)Porsche - 911 GT3 RS (991.2) - OPF\/GPF (2019 - 2020)Porsche - 911 Speedster - OPF\/GPF (2019 - 2020)Porsche - 911 GT3 RS (991.2) (2018 - 2020)Porsche - 911 GT3 RS (991.2) - OPF\/GPF (2019 - 2020)Porsche - 911 Speedster - OPF\/GPF (2019 - 2020)Porsche - 911 GT3 \/ GT3 Touring (991.2) (2018 - 2019)Porsche - 911 GT3 RS (991.2) (2018 - 2020)Porsche - 911 GT3 RS (991.2) - OPF\/GPF (2019 - 2020)\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePart number AKRA-POR-16-KIT\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne exhaust system, as described above.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":46849081016399,"sku":"AKRA-POR-16-KIT","price":40046.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/360_F_504289605_zehJiK0tCuZLP2MdfFBpcJdOVxKLnXg1_9ce1c67d-ec40-4e3f-bb89-7259fcf2166e.jpg?v=1789965900"},{"product_id":"akrapovic-exhaust-system-for-porsche-911-gt3-gt3-touring-991-2-s-po-ti-10h-gt3-kit","title":"Akrapovic Exhaust System - Porsche 911 GT3, GT3 Touring, GT3 RS (991.2) (GT3)","description":"\u003cp\u003eAkrapovic Exhaust System for the Porsche 911 GT3, GT3 Touring, GT3 RS (991.2).\u003c\/p\u003e\u003ch3\u003eAbout Akrapovič exhaust systems\u003c\/h3\u003e\u003cp\u003eAn Akrapovič exhaust system replaces the factory system from the manifold or the catalyst back, and is developed for one car rather than adapted. The work goes into three things at once: how much the system weighs, how the gas flows through it, and what the car sounds like at every point in the rev range.\u003c\/p\u003e\u003cp\u003eComponents are made from titanium, stainless steel or Inconel depending on the system, with cast parts produced in Akrapovič's own foundry. The material for this system is named in the title and the specification.\u003c\/p\u003e\u003cp\u003eAkrapovic’s Slip-On Line represents the first step in the exhaust system tuning process and the muffler can easily be installed onto the Porsche GT3 RS’s original system. Built from hi-grade titanium and finished with two eye-catching double round tailpipes, this entry system makes the GT3 RS more powerful and lighter, and gives the car that unique Akrapovic sound, while still meeting ECE specifications.\u003c\/p\u003e\u003cp\u003eThe mandatory tail pipe set TP-T\/S\/19\/H needs to be ordered separately. When combining the slip-on system with optional carbon fibre diffuser DI-PO\/CA\/7\/G, you must use tail pipe set TP-T\/S\/17\/H or TP-T\/S\/17.\u003c\/p\u003e\u003cp\u003eThe Slip-On system can be optionally combined with Link Pipe Set (Titanium) that retains stock headers and removes stock side mufflers, or it can be upgraded into a full Akrapovic exhaust system, either with combining it with Evolution Race Header Set without valves or Evolution Header Set with side mufflers and valves. If the system is upgraded with link pipe or evolution sets, the ECE type approval is not valid anymore.\u003c\/p\u003e\u003cp\u003eTop the system off with a pair of eye-catching double round tailpipes, made of high-grade titanium.\u003c\/p\u003e\u003cp\u003eEvolution Header Set converts the slip-on system into a full system designed to give noticeably increased power at higher revs. Handcrafted titanium headers incorporate 100 cpsi sports catalytic convertors and side mufflers—all designed to increase power and torque—the Evolution Header Set utilizes integrated catalytic convertors and the functionality of the exhaust valves to deliver an out-and-out attack on the senses. With the valves in the open position, it delivers a sportier and hard-hitting sound, but also has the option of a lower sound level when the valves are closed, perfect for use in more everyday locations. Offering an increased weight savings in the area behind the engine and the rear axle, the reduction will enhance the handling and improve performance.\u003c\/p\u003e\u003cp\u003eWhen installing Akrapovic aftermarket optional link pipes with sports catalytic converters or without catalytic converters, which are developed for use on closed tracks only, remapping the ECU is mandatory. When installing Akrapovic aftermarket exhaust system that was developed for use on closed tracks, we recommend remapping the ECU in order to prevent potential »check engine light« warning signals.\u003c\/p\u003e\u003cp\u003eEvolution Race Header Set converts the slip-on system into a full system, built for the track and gives the Porsche GT3 the extra performance to match. Handcrafted titanium headers incorporate 100 cpsi sports catalytic convertors and titanium flanges—cast in Akrapovic’s own foundry. The system offers a perfect power curve right from 3,000 rpm to the very top of the power band, designed to continually increase performance as the revs rise. Along with improved torque and the maximum weight savings to enhance handling, adding the Evolution Race Header (Set) will have the car performing like a true cup racer—with a deep, loud, and powerful Akrapovic racing sound to match its performance.\u003c\/p\u003e\u003cp\u003eWhen installing Akrapovic aftermarket optional link pipes with sports catalytic converters or without catalytic converters, which are developed for use on closed tracks only, remapping the ECU is mandatory. When installing Akrapovic aftermarket exhaust system that was developed for use on closed tracks, we recommend remapping the ECU in order to prevent potential »check engine light« warning signals.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePower: 373.3 kW at 8,200 rpm standard, 378.1 kW at 8,150 rpm with Akrapovič, up to + 5.5 kW at 8,000 rpm\u003c\/li\u003e\n\u003cli\u003eTorque: 437.4 Nm at 6,150 rpm standard, 478.0 Nm at 6,200 rpm with Akrapovič, up to + 15.8 Nm at 4,400 rpm\u003c\/li\u003e\n\u003cli\u003eWeight: 31.1 kg standard, 16.9 kg with Akrapovič, 14.2 kg saved\u003c\/li\u003e\n\u003cli\u003eWeight saving: 45.8%\u003c\/li\u003e\n\u003cli\u003eSound level: 95 dB at 4,000 rpm standard, 105.1 dB at 4,000 rpm with Akrapovič\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 360 minutes\u003c\/li\u003e\n\u003cli\u003ePower: 373.3 kW at 8,200 rpm standard, 377.8 kW at 8,150 rpm with Akrapovič, up to + 21.6 kW at 4,300 rpm\u003c\/li\u003e\n\u003cli\u003eTorque: 473.4 Nm at 6,150 rpm standard, 477.1 Nm at 6,100 rpm with Akrapovič, up to + 31.5 Nm at 3,550 rpm\u003c\/li\u003e\n\u003cli\u003eWeight: 31.1 kg standard, 7.0 kg with Akrapovič, 24.1 kg saved\u003c\/li\u003e\n\u003cli\u003eWeight saving: 77.4%\u003c\/li\u003e\n\u003cli\u003eSound level: 95 dB at 4,000 rpm standard, 112.5 dB at 4,000 rpm with Akrapovič\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 300 minutes\u003c\/li\u003e\n\u003cli\u003eWeight: 1.7 kg standard, 0.9 kg with Akrapovič, 0.8 kg saved\u003c\/li\u003e\n\u003cli\u003eWeight saving: 48.5%\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 90.0 minutes\u003c\/li\u003e\n\u003cli\u003eListed by Akrapovič for: Porsche 911 (991.2) Coupe GT3 2017-2019Porsche 911 (991.2) Coupe GT3 Touring 2018-2019\u003c\/li\u003e\n\u003cli\u003ePart number S-PO\/TI\/10H-GT3-KIT\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePorsche 911, 2017 to 2019\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSlip-On Line (Titanium) (S-PO\/TI\/10H)Titanium Tail Pipe Set (TP-T\/S\/17\/H)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThis product does not meet emission compliance requirements for street or highway use.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":46849102938191,"sku":"S-PO\/TI\/10H-GT3-KIT","price":13298.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/AKRA-POR-8-KIT_11.png?v=1789965956"},{"product_id":"akrapovic-exhaust-system-for-porsche-911-gt3rs-991-2-s-po-ti-10h-gt3rs-kit","title":"Akrapovic Exhaust System - Porsche 911 GT3 RS (991.2)","description":"\u003cp\u003eAkrapovic Exhaust System for the Porsche 911 GT3, GT3 Touring, GT3 RS (991.2).\u003c\/p\u003e\u003ch3\u003eAbout Akrapovič exhaust systems\u003c\/h3\u003e\u003cp\u003eAn Akrapovič exhaust system replaces the factory system from the manifold or the catalyst back, and is developed for one car rather than adapted. The work goes into three things at once: how much the system weighs, how the gas flows through it, and what the car sounds like at every point in the rev range.\u003c\/p\u003e\u003cp\u003eComponents are made from titanium, stainless steel or Inconel depending on the system, with cast parts produced in Akrapovič's own foundry. The material for this system is named in the title and the specification.\u003c\/p\u003e\u003cp\u003eAkrapovic’s Slip-On Line represents the first step in the exhaust system tuning process and the muffler can easily be installed onto the Porsche GT3 RS’s original system. Built from hi-grade titanium and finished with two eye-catching double round tailpipes, this entry system makes the GT3 RS more powerful and lighter, and gives the car that unique Akrapovic sound, while still meeting ECE specifications.\u003c\/p\u003e\u003cp\u003eThe mandatory tail pipe set TP-T\/S\/19\/H needs to be ordered separately. When combining the slip-on system with optional carbon fibre diffuser DI-PO\/CA\/7\/G, you must use tail pipe set TP-T\/S\/17\/H or TP-T\/S\/17.\u003c\/p\u003e\u003cp\u003eThe Slip-On system can be optionally combined with Link Pipe Set (Titanium) that retains stock headers and removes stock side mufflers, or it can be upgraded into a full Akrapovic exhaust system, either with combining it with Evolution Race Header Set without valves or Evolution Header Set with side mufflers and valves. If the system is upgraded with link pipe or evolution sets, the ECE type approval is not valid anymore.\u003c\/p\u003e\u003cp\u003eTop the system off with a pair of eye-catching double round tailpipes, made of high-grade titanium. Made specifically for the GT3 RS (991.2) version.\u003c\/p\u003e\u003cp\u003eEvolution Header Set converts the slip-on system into a full system designed to give noticeably increased power at higher revs. Handcrafted titanium headers incorporate 100 cpsi sports catalytic convertors and side mufflers—all designed to increase power and torque—the Evolution Header Set utilizes integrated catalytic convertors and the functionality of the exhaust valves to deliver an out-and-out attack on the senses. With the valves in the open position, it delivers a sportier and hard-hitting sound, but also has the option of a lower sound level when the valves are closed, perfect for use in more everyday locations. Offering an increased weight savings in the area behind the engine and the rear axle, the reduction will enhance the handling and improve performance.\u003c\/p\u003e\u003cp\u003eWhen installing Akrapovic aftermarket optional link pipes with sports catalytic converters or without catalytic converters, which are developed for use on closed tracks only, remapping the ECU is mandatory. When installing Akrapovic aftermarket exhaust system that was developed for use on closed tracks, we recommend remapping the ECU in order to prevent potential »check engine light« warning signals.\u003c\/p\u003e\u003cp\u003eEvolution Race Header Set converts the slip-on system into a full system, built for the track and gives the Porsche GT3 the extra performance to match. Handcrafted titanium headers incorporate 100 cpsi sports catalytic convertors and titanium flanges—cast in Akrapovic’s own foundry. The system offers a perfect power curve right from 3,000 rpm to the very top of the power band, designed to continually increase performance as the revs rise. Along with improved torque and the maximum weight savings to enhance handling, adding the Evolution Race Header (Set) will have the car performing like a true cup racer—with a deep, loud, and powerful Akrapovic racing sound to match its performance.\u003c\/p\u003e\u003cp\u003eWhen installing Akrapovic aftermarket optional link pipes with sports catalytic converters or without catalytic converters, which are developed for use on closed tracks only, remapping the ECU is mandatory. When installing Akrapovic aftermarket exhaust system that was developed for use on closed tracks, we recommend remapping the ECU in order to prevent potential »check engine light« warning signals.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePower: 373.3 kW at 8,200 rpm standard, 378.1 kW at 8,150 rpm with Akrapovič, up to + 5.5 kW at 8,000 rpm\u003c\/li\u003e\n\u003cli\u003eTorque: 437.4 Nm at 6,150 rpm standard, 478.0 Nm at 6,200 rpm with Akrapovič, up to + 15.8 Nm at 4,400 rpm\u003c\/li\u003e\n\u003cli\u003eWeight: 31.1 kg standard, 16.9 kg with Akrapovič, 14.2 kg saved\u003c\/li\u003e\n\u003cli\u003eWeight saving: 45.8%\u003c\/li\u003e\n\u003cli\u003eSound level: 95 dB at 4,000 rpm standard, 105.1 dB at 4,000 rpm with Akrapovič\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 360 minutes\u003c\/li\u003e\n\u003cli\u003ePower: 373.3 kW at 8,200 rpm standard, 377.8 kW at 8,150 rpm with Akrapovič, up to + 21.6 kW at 4,300 rpm\u003c\/li\u003e\n\u003cli\u003eTorque: 473.4 Nm at 6,150 rpm standard, 477.1 Nm at 6,100 rpm with Akrapovič, up to + 31.5 Nm at 3,550 rpm\u003c\/li\u003e\n\u003cli\u003eWeight: 31.1 kg standard, 7.0 kg with Akrapovič, 24.1 kg saved\u003c\/li\u003e\n\u003cli\u003eWeight saving: 77.4%\u003c\/li\u003e\n\u003cli\u003eSound level: 95 dB at 4,000 rpm standard, 112.5 dB at 4,000 rpm with Akrapovič\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 300 minutes\u003c\/li\u003e\n\u003cli\u003eListed by Akrapovič for: Porsche 911 (991.2) Coupe GT3 2017-2019Porsche 911 (991.2) Coupe GT3 Touring 2018-2019; Porsche - 911 GT3 \/ GT3 Touring (991.2) (2018 - 2019)Porsche - 911 GT3 RS (991.2) (2018 - 2020)Porsche - 911 GT3 RS (991.2) (2018 - 2020)\u003c\/li\u003e\n\u003cli\u003ePart number S-PO\/TI\/10H-GT3RS-KIT\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePorsche 911, 2017 to 2019\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSlip-On Line (Titanium) (S-PO\/TI\/10H)Titanium Tail Pipe Set (TP-T\/S\/19\/H)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThis product does not meet emission compliance requirements for street or highway use.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":46849104445519,"sku":"S-PO\/TI\/10H-GT3RS-KIT","price":13298.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/AKRA-POR-11-KIT_1.png?v=1789965957"},{"product_id":"akrapovic-exhaust-system-for-porsche-911-gt3rs-991-2-opf-gpf-s-po-ti-15-kit","title":"Akrapovic Exhaust System - Porsche 911 GT3 RS (991.2) (OPF)","description":"\u003cp\u003eAkrapovic Exhaust System for the Porsche 911 GT3 RS, Speedster, GT3 (991.2, 991).\u003c\/p\u003e\u003ch3\u003eAbout Akrapovič exhaust systems\u003c\/h3\u003e\u003cp\u003eAn Akrapovič exhaust system replaces the factory system from the manifold or the catalyst back, and is developed for one car rather than adapted. The work goes into three things at once: how much the system weighs, how the gas flows through it, and what the car sounds like at every point in the rev range.\u003c\/p\u003e\u003cp\u003eComponents are made from titanium, stainless steel or Inconel depending on the system, with cast parts produced in Akrapovič's own foundry. The material for this system is named in the title and the specification.\u003c\/p\u003e\u003cp\u003eSlip-on system (S-PO\/TI\/15) for GT3 RS \/ Speedster OPF model must be mandatory combined with:\u003c\/p\u003e\u003cp\u003e- Evolution Header Set (E-PO\/T\/6\/1)\u003c\/p\u003e\u003cp\u003e- Tail pipe set TP-T\/S\/19. When combining the slip-on system with optional carbon fibre diffuser DI-PO\/CA\/7\/G (fits on GT3 RS), you must use tail pipe set TP-T\/S\/17.\u003c\/p\u003e\u003cp\u003e- An additional original Porsche stock bracket (Porsche p\/n: 99111147391) is required for mounting the Akrapovic exhaust system. Please read the instructions carefully before the start of the installation.\u003c\/p\u003e\u003cp\u003eThis Slip-On system (S-PO\/TI\/15) must be upgraded into a full Akrapovic Evolution Line exhaust system by combining it with the Evolution Header Set (E-PO\/T\/6) with side mufflers and valves, which is designed to unleash the system’s full potential and enhance the performance of the car as the revs rise. With superb attention to detail, including parts cast in Akrapovic’s own titanium foundry, the craftsmanship and coating finish on the system is a joy to behold. With an exhaust manifold incorporating 100 cpsi sports catalytic convertors and side mufflers, the Evolution Line utilizes integrated catalytic convertors and the functionality of the exhaust valves to deliver an out-and-out attack on the senses. It offers increased weight savings in the area behind the engine and rear axle. The Evolution Line is also tuned to deliver a sporty and hard-hitting sound. The more the engine is revved and the acceleration builds, the six-cylinder engine sound delivers a rich, harmonic, and high-frequency soundtrack, making every journey a memorable experience and one that continues even after the throttle is released, providing a full and rewarding sensory experience.\u003c\/p\u003e\u003cp\u003eWhen installing Akrapovic aftermarket optional link pipes with sports catalytic converters or without catalytic converters, which are developed for use on closed tracks only, remapping the ECU is mandatory. When installing Akrapovic aftermarket exhaust system that was developed for use on closed tracks, we recommend remapping the ECU in order to prevent potential »check engine light« warning signals.\u003c\/p\u003e\u003cp\u003eEvolution Header Set (Titanium) must be mounted together with Slip-On Line (Titanium) system S-PO\/TI\/15 or Slip-On Race Line (Titanium) system S-PO\/TI\/8. An additional original Porsche stock bracket (Porsche p\/n: 99111147391) is required for mounting the Akrapovic exhaust system. Please read the instructions carefully before the start of the installation.\u003c\/p\u003e\u003cp\u003eEvolution Header Set converts the slip-on system into a full system designed to give noticeably increased power at higher revs. Handcrafted titanium headers incorporate 100 cpsi sports catalytic convertors and side mufflers—all designed to increase power and torque—the Evolution Header Set utilizes integrated catalytic convertors and the functionality of the exhaust valves to deliver an out-and-out attack on the senses. With the valves in the open position, it delivers a sportier and hard-hitting sound, but also has the option of a lower sound level when the valves are closed, perfect for use in more everyday locations. Offering an increased weight savings in the area behind the engine and the rear axle, the reduction will enhance the handling and improve performance.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePower: 385.6 kW at 8,350 rpm standard, 394.4 kW at 8,400 rpm with Akrapovič, up to + 10.0 kW at 6,550 rpm\u003c\/li\u003e\n\u003cli\u003eTorque: 483.7 Nm at 6,050 rpm standard, 497.5 Nm at 6,000 rpm with Akrapovič, up to + 28.9 Nm at 2,100 rpm\u003c\/li\u003e\n\u003cli\u003eListed by Akrapovič for: Porsche 911 (991.1) Coupe GT3 2014-2016Porsche 911 (991.2) Convertible Speedster 2019-2019Porsche 911 (991.2) Coupe GT3 RS 2018-2019\u003c\/li\u003e\n\u003cli\u003ePart number S-PO\/TI\/15-KIT\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePorsche 911, 2014 to 2019\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSlip-On Line (Titanium) (S-PO\/TI\/15)Evolution Header Set (Titanium) (E-PO\/T\/6\/1)Titanium Tail Pipe Set (TP-T\/S\/19)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThis product does not meet emission compliance requirements for street or highway use.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":46849106182223,"sku":"S-PO\/TI\/15-KIT","price":34497.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/AKRA-POR-15-KIT_2.png?v=1789965960"},{"product_id":"akrapovic-race-line-exhaust-system-for-porsche-911-gt3rs-991-2-s-po-ti-8-gt3rs-kit","title":"Akrapovic Race Line Exhaust System - Porsche 911 GT3 RS (991.2)","description":"\u003cp\u003eAkrapovic Race Line Exhaust System for the Porsche 911 GT3 RS, GT3, GT3 Touring, Speedster (991.2, 991).\u003c\/p\u003e\u003ch3\u003eAbout Akrapovič exhaust systems\u003c\/h3\u003e\u003cp\u003eAn Akrapovič exhaust system replaces the factory system from the manifold or the catalyst back, and is developed for one car rather than adapted. The work goes into three things at once: how much the system weighs, how the gas flows through it, and what the car sounds like at every point in the rev range.\u003c\/p\u003e\u003cp\u003eComponents are made from titanium, stainless steel or Inconel depending on the system, with cast parts produced in Akrapovič's own foundry. The material for this system is named in the title and the specification.\u003c\/p\u003e\u003cp\u003eAkrapovic’s Slip-On Race Line represents the first step in the exhaust system tuning process and it can easily be installed onto the Porsche GT3's original system. Built from hi-grade titanium and finished with two eye-catching double round tailpipes, this entry system makes the GT3 more powerful and lighter, and gives the car that unique, sporty Akrapovic sound.\u003c\/p\u003e\u003cp\u003eThe mandatory tail pipe set TP-T\/S\/19 needs to be ordered separately.\u003c\/p\u003e\u003cp\u003eThe Slip-On Race system can be optionally combined with Link Pipe Set (Titanium) that retains stock headers and removes stock side mufflers, or it can be upgraded into a full Akrapovic exhaust system, either with combining it with Evolution Race Header Set without valves or Evolution Header Set with side mufflers and valves.\u003c\/p\u003e\u003cp\u003eTop the system off with a pair of eye-catching double round tailpipes, made of high-grade titanium. Made specifically for the GT3 RS (991.2) version.\u003c\/p\u003e\u003cp\u003eEvolution Header Set converts the slip-on system into a full system designed to give noticeably increased power at higher revs. Handcrafted titanium headers incorporate 100 cpsi sports catalytic convertors and side mufflers—all designed to increase power and torque—the Evolution Header Set utilizes integrated catalytic convertors and the functionality of the exhaust valves to deliver an out-and-out attack on the senses. With the valves in the open position, it delivers a sportier and hard-hitting sound, but also has the option of a lower sound level when the valves are closed, perfect for use in more everyday locations. Offering an increased weight savings in the area behind the engine and the rear axle, the reduction will enhance the handling and improve performance.\u003c\/p\u003e\u003cp\u003eWhen installing Akrapovic aftermarket optional link pipes with sports catalytic converters or without catalytic converters, which are developed for use on closed tracks only, remapping the ECU is mandatory. When installing Akrapovic aftermarket exhaust system that was developed for use on closed tracks, we recommend remapping the ECU in order to prevent potential »check engine light« warning signals.\u003c\/p\u003e\u003cp\u003eEvolution Race Header Set converts the slip-on system into a full system, built for the track and gives the Porsche GT3 the extra performance to match. Handcrafted titanium headers incorporate 100 cpsi sports catalytic convertors and titanium flanges—cast in Akrapovic’s own foundry. The system offers a perfect power curve right from 3,000 rpm to the very top of the power band, designed to continually increase performance as the revs rise. Along with improved torque and the maximum weight savings to enhance handling, adding the Evolution Race Header (Set) will have the car performing like a true cup racer—with a deep, loud, and powerful Akrapovic racing sound to match its performance.\u003c\/p\u003e\u003cp\u003eWhen installing Akrapovic aftermarket optional link pipes with sports catalytic converters or without catalytic converters, which are developed for use on closed tracks only, remapping the ECU is mandatory. When installing Akrapovic aftermarket exhaust system that was developed for use on closed tracks, we recommend remapping the ECU in order to prevent potential »check engine light« warning signals.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePower: 374.9 kW at 8,150 rpm standard, 377.3 kW at 8,250 rpm with Akrapovič, up to + 6.5 kW at 4,400 rpm\u003c\/li\u003e\n\u003cli\u003eTorque: 476.4 Nm at 6,150 rpm standard, 479.0 Nm at 6,150 rpm with Akrapovič, up to + 15.2 Nm at 4,400 rpm\u003c\/li\u003e\n\u003cli\u003eWeight: 8.6 kg standard, 3.9 kg with Akrapovič, 4.7 kg saved\u003c\/li\u003e\n\u003cli\u003eWeight saving: 54.3%\u003c\/li\u003e\n\u003cli\u003eSound level: 95 dB at 4,000 rpm standard, 103.3 dB at 4,000 rpm with Akrapovič\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 240 minutes\u003c\/li\u003e\n\u003cli\u003ePower: 373.3 kW at 8,200 rpm standard, 378.1 kW at 8,150 rpm with Akrapovič, up to + 5.5 kW at 8,000 rpm\u003c\/li\u003e\n\u003cli\u003eTorque: 437.4 Nm at 6,150 rpm standard, 478.0 Nm at 6,200 rpm with Akrapovič, up to + 15.8 Nm at 4,400 rpm\u003c\/li\u003e\n\u003cli\u003eWeight: 31.1 kg standard, 16.9 kg with Akrapovič, 14.2 kg saved\u003c\/li\u003e\n\u003cli\u003eWeight saving: 45.8%\u003c\/li\u003e\n\u003cli\u003eSound level: 95 dB at 4,000 rpm standard, 105.1 dB at 4,000 rpm with Akrapovič\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 360 minutes\u003c\/li\u003e\n\u003cli\u003ePower: 373.3 kW at 8,200 rpm standard, 377.8 kW at 8,150 rpm with Akrapovič, up to + 21.6 kW at 4,300 rpm\u003c\/li\u003e\n\u003cli\u003eTorque: 473.4 Nm at 6,150 rpm standard, 477.1 Nm at 6,100 rpm with Akrapovič, up to + 31.5 Nm at 3,550 rpm\u003c\/li\u003e\n\u003cli\u003eWeight: 31.1 kg standard, 7.0 kg with Akrapovič, 24.1 kg saved\u003c\/li\u003e\n\u003cli\u003eWeight saving: 77.4%\u003c\/li\u003e\n\u003cli\u003eSound level: 95 dB at 4,000 rpm standard, 112.5 dB at 4,000 rpm with Akrapovič\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 300 minutes\u003c\/li\u003e\n\u003cli\u003ePart number S-PO\/TI\/8-GT3RS-KIT\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePorsche 911, 2014 to 2019\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSlip-On Race Line (Titanium) (S-PO\/TI\/8)Titanium Tail Pipe Set (TP-T\/S\/19)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThis product does not meet emission compliance requirements for street or highway use.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":46849110933583,"sku":"S-PO\/TI\/8-GT3RS-KIT","price":8488.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/AKRA-POR-13-KIT_1.png?v=1789965971"},{"product_id":"akrapovic-race-line-exhaust-system-for-porsche-911-gt3rs-991-2-opf-gpf-s-po-ti-8-opf-kit","title":"Akrapovic Race Line Exhaust System - Porsche 911 GT3 RS (991.2) (OPF)","description":"\u003cp\u003eAkrapovic Race Line Exhaust System for the Porsche 911 GT3 RS, GT3, GT3 Touring, Speedster (991.2, 991).\u003c\/p\u003e\u003ch3\u003eAbout Akrapovič exhaust systems\u003c\/h3\u003e\u003cp\u003eAn Akrapovič exhaust system replaces the factory system from the manifold or the catalyst back, and is developed for one car rather than adapted. The work goes into three things at once: how much the system weighs, how the gas flows through it, and what the car sounds like at every point in the rev range.\u003c\/p\u003e\u003cp\u003eComponents are made from titanium, stainless steel or Inconel depending on the system, with cast parts produced in Akrapovič's own foundry. The material for this system is named in the title and the specification.\u003c\/p\u003e\u003cp\u003eAkrapovic’s Slip-On Race Line represents the first step in the exhaust system tuning process and it can easily be installed onto the Porsche GT3's original system. Built from hi-grade titanium and finished with two eye-catching double round tailpipes, this entry system makes the GT3 more powerful and lighter, and gives the car that unique, sporty Akrapovic sound.\u003c\/p\u003e\u003cp\u003eThe mandatory tail pipe set TP-T\/S\/19 needs to be ordered separately.\u003c\/p\u003e\u003cp\u003eThe Slip-On Race system can be optionally combined with Link Pipe Set (Titanium) that retains stock headers and removes stock side mufflers, or it can be upgraded into a full Akrapovic exhaust system, either with combining it with Evolution Race Header Set without valves or Evolution Header Set with side mufflers and valves.\u003c\/p\u003e\u003cp\u003eEvolution Header Set (Titanium) must be mounted together with Slip-On Line (Titanium) system S-PO\/TI\/15 or Slip-On Race Line (Titanium) system S-PO\/TI\/8. An additional original Porsche stock bracket (Porsche p\/n: 99111147391) is required for mounting the Akrapovic exhaust system. Please read the instructions carefully before the start of the installation.\u003c\/p\u003e\u003cp\u003eEvolution Header Set converts the slip-on system into a full system designed to give noticeably increased power at higher revs. Handcrafted titanium headers incorporate 100 cpsi sports catalytic convertors and side mufflers—all designed to increase power and torque—the Evolution Header Set utilizes integrated catalytic convertors and the functionality of the exhaust valves to deliver an out-and-out attack on the senses. With the valves in the open position, it delivers a sportier and hard-hitting sound, but also has the option of a lower sound level when the valves are closed, perfect for use in more everyday locations. Offering an increased weight savings in the area behind the engine and the rear axle, the reduction will enhance the handling and improve performance.\u003c\/p\u003e\u003cp\u003eWhen installing Akrapovic aftermarket optional link pipes with sports catalytic converters or without catalytic converters, which are developed for use on closed tracks only, remapping the ECU is mandatory. When installing Akrapovic aftermarket exhaust system that was developed for use on closed tracks, we recommend remapping the ECU in order to prevent potential »check engine light« warning signals.\u003c\/p\u003e\u003cp\u003eTop the system off with a pair of eye-catching double round tailpipes, made of high-grade titanium. Made specifically for the GT3 RS (991.2) version.\u003c\/p\u003e\u003cp\u003ePorsche 911 (991.1) Coupe GT3 2014-2016Porsche 911 (991.2) Convertible Speedster 2019-2019Porsche 911 (991.2) Coupe GT3 2017-2019Porsche 911 (991.2) Coupe GT3 RS 2018-2019Porsche 911 (991.2) Coupe GT3 Touring 2018-2019\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePower: 374.9 kW at 8,150 rpm standard, 377.3 kW at 8,250 rpm with Akrapovič, up to + 6.5 kW at 4,400 rpm\u003c\/li\u003e\n\u003cli\u003eTorque: 476.4 Nm at 6,150 rpm standard, 479.0 Nm at 6,150 rpm with Akrapovič, up to + 15.2 Nm at 4,400 rpm\u003c\/li\u003e\n\u003cli\u003eWeight: 8.6 kg standard, 3.9 kg with Akrapovič, 4.7 kg saved\u003c\/li\u003e\n\u003cli\u003eWeight saving: 54.3%\u003c\/li\u003e\n\u003cli\u003eSound level: 95 dB at 4,000 rpm standard, 103.3 dB at 4,000 rpm with Akrapovič\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 240 minutes\u003c\/li\u003e\n\u003cli\u003ePower: 385.6 kW at 8,350 rpm standard, 394.4 kW at 8,400 rpm with Akrapovič, up to + 10.0 kW at 6,550 rpm\u003c\/li\u003e\n\u003cli\u003eTorque: 483.7 Nm at 6,050 rpm standard, 497.5 Nm at 6,000 rpm with Akrapovič, up to + 28.9 Nm at 2,100 rpm\u003c\/li\u003e\n\u003cli\u003ePart number S-PO\/TI\/8-OPF-KIT\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePorsche 911, 2014 to 2019\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSlip-On Race Line (Titanium) (S-PO\/TI\/8)Evolution Header Set (Titanium) (E-PO\/T\/6\/1)Titanium Tail Pipe Set (TP-T\/S\/19)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThis product does not meet emission compliance requirements for street or highway use.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":46849111425103,"sku":"S-PO\/TI\/8-OPF-KIT","price":29627.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/AKRA-POR-17-KIT_2.png?v=1789965972"}],"url":"https:\/\/www.heasmans.com.au\/collections\/porsche-911-gt3-rs-991-2.oembed","provider":"Heasmans","version":"1.0","type":"link"}