{"title":"KW Holiday Sale","description":null,"products":[{"product_id":"kw-coilover-kit-v1-for-06-1989-audi-coupe-89-8b-10210002","title":"KW V1 Coilover Kit - Audi 80 (B3), Audi 90 (B3), Audi Coupé (89) [10210002]","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi 80 (B3), Audi 90 (B3), Audi Coupé (89).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: 1.4, 1.6, 1.6 D, 1.6 TD, 1.8, 1.8 E, 1.8 S, 1.9, 1.9 D, 2.0, 2.0 E, 2.0 E 16V, 2.3, 2.0 20 V, 2.2 E, 2.3 E, 2.3 E 20V, 2.2, 2.3 20V\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi 80 (B3), Audi 90 (B3), Audi Coupé (89)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable on the front and rear axles (threaded strut housings)\u003c\/li\u003e\n\u003cli\u003eTo identify the suspension struts, measure the diameter of the strut mounting screw at the steering knuckle. Screw diameter either M12 or M14\u003c\/li\u003e\n\u003cli\u003eWhen using original tires, wheel offset spacers may be required\u003c\/li\u003e\n\u003cli\u003ePart number 10210002\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841414910031,"sku":"10210002","price":2358.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000218.jpg?v=1789943921"},{"product_id":"kw-coilover-kit-v1-for-05-2012-audi-a3-8v1-for-8vk-w-deactivation-for-electronic-dampers-1021000u","title":"KW V1 Coilover Kit - Audi A3 (8V), Audi A3 Saloon (8V), Audi A3 (EDC Deactivation Included) [1021000U]","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A3 (8V), Audi A3 Saloon (8V), Audi A3.\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eIncludes the deactivation kit for the factory electronic dampers\u003c\/li\u003e\n\u003cli\u003eSuits engines: 1.0 TFSI, 1.2 TFSI, 1.4 TFSI, 1.4 TSI, 1.5 TFSI, 1.6 TDI, 1.8 TFSI, 2.0 TDI, 2.0 TFSI, 30 TDI, 30 TFSI, 35 TFSI, 40 TFSI\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A3 (8V), Audi A3 Saloon (8V), Audi A3\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eElectronic damping control has to be deactivated. Deactivation kit is included in the delivery.\u003c\/li\u003e\n\u003cli\u003eOnly for cars with a clamp diameter of 55mm on the front axle\u003c\/li\u003e\n\u003cli\u003ePart number 1021000U\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841414942799,"sku":"1021000U","price":2295.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000239.jpg?v=1789943921"},{"product_id":"kw-coilover-kit-v1-for-09-1991-audi-80-8c2-b4-10210016","title":"KW V1 Coilover Kit - Audi 80 (B4), Audi 80 Avant (B4) [10210016]","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi 80 (B4), Audi 80 Avant (B4).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: 2.0 E 16V quattro, 2.0 E quattro, 2.0 quattro, 2.3 E quattro, 2.6 quattro, 2.8 quattro, S2 quattro\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi 80 (B4), Audi 80 Avant (B4)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable on the front and rear axles (threaded strut housings)\u003c\/li\u003e\n\u003cli\u003eTo identify the suspension struts, measure the diameter of the strut mounting screw at the steering knuckle. Screw diameter either M12 or M14\u003c\/li\u003e\n\u003cli\u003eWhen using original tires, wheel offset spacers may be required\u003c\/li\u003e\n\u003cli\u003ePart number 10210016\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841414975567,"sku":"10210016","price":2358.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000250.jpg?v=1789943921"},{"product_id":"kw-coilover-kit-v1-for-09-1991-audi-80-avant-8c5-b4-10210018","title":"KW V1 Coilover Kit - Audi 80 Avant (B4) [10210018]","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi 80 Avant (B4).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: B4 Professional fitting is recommended.\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi 80 Avant (B4)\u003c\/li\u003e\n\u003cli\u003ePart number 10210018\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841415008335,"sku":"10210018","price":2589.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000252.jpg?v=1789943921"},{"product_id":"kw-coilover-kit-v1-for-10-1988-02-1994-audi-v8-441-442-4c2-4c8-fa-struts-in-exchange-10210043","title":"KW V1 Coilover Kit - Audi V8 (D11)","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi V8 (D11).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: 3.6 quattro, 4.2 quattro\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi V8 (D11)\u003c\/li\u003e\n\u003cli\u003eOriginal struts need to be sent in advance for modification\u003c\/li\u003e\n\u003cli\u003eNot for vehicles with automatic self leveling control \/ air suspension\u003c\/li\u003e\n\u003cli\u003eHeight adjustable on the front and rear axles (threaded strut housings)\u003c\/li\u003e\n\u003cli\u003eProduction on demand. Please ask for delivery time.\u003c\/li\u003e\n\u003cli\u003eCoilover kits where the strut housings are being modified are only availible in galvanized finish.\u003c\/li\u003e\n\u003cli\u003ePart number 10210043\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841415041103,"sku":"10210043","price":2386.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000270.jpg?v=1789943921"},{"product_id":"kw-coilover-kit-v1-for-05-2012-audi-a3-8v1-for-8vk-1021000p","title":"KW V1 Coilover Kit - Audi A3 (8V), Audi A3 Saloon (8V), Audi A3 (55mm front axle strut) [1021000P]","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A3 (8V), Audi A3 Saloon (8V), Audi A3.\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eThis part number suits: 55mm front axle strut\u003c\/li\u003e\n\u003cli\u003eSuits engines: 1.6 TDI, 1.8 TFSI, 2.0 TDI, 2.0 TFSI, 1.2 TFSI, 30 TDI, 30 TFSI, 35 TDI, 35 TFSI, 40 TFSI\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A3 (8V), Audi A3 Saloon (8V), Audi A3\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eFor cars which have electronic dampers, make sure they are shut down. Specific electronical damper shut-downs are available from KW. Please check our accessories list\u003c\/li\u003e\n\u003cli\u003eOnly for cars with a clamp diameter of 55mm on the front axle\u003c\/li\u003e\n\u003cli\u003ePart number 1021000P\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSeveral part numbers cover this vehicle. Check the specification against your car before ordering, or ask us.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841415073871,"sku":"1021000P","price":2022.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000234.jpg?v=1789943921"},{"product_id":"kw-coilover-kit-v1-for-05-1991-08-2000-audi-cabriolet-8g7-b4-10210023","title":"KW V1 Coilover Kit - Audi [10210023]","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi.\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: 1.8, 1.9 TDI, 2.0 16V, 2.0 E, 2.3 E, 2.6, 2.8\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi\u003c\/li\u003e\n\u003cli\u003eHeight adjustable on the front and rear axles (threaded strut housings)\u003c\/li\u003e\n\u003cli\u003eTo identify the suspension struts, measure the diameter of the strut mounting screw at the steering knuckle. Screw diameter either M12 or M14\u003c\/li\u003e\n\u003cli\u003eWhen using original tires, wheel offset spacers may be required\u003c\/li\u003e\n\u003cli\u003ePart number 10210023\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841415106639,"sku":"10210023","price":2358.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000256.jpg?v=1789943921"},{"product_id":"kw-coilover-kit-v1-for-06-1989-audi-coupe-89-8b-10210003","title":"KW V1 Coilover Kit - Audi 80 (B3), Audi Coupé (89) [10210003]","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi 80 (B3), Audi Coupé (89).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: 1.6, 2.3, 2.0, 2.0 16 V, 2.0 20 V, 2.2, 2.6, 2.8\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi 80 (B3), Audi Coupé (89)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable on the front and rear axles (threaded strut housings)\u003c\/li\u003e\n\u003cli\u003eTo identify the suspension struts, measure the diameter of the strut mounting screw at the steering knuckle. Screw diameter either M12 or M14\u003c\/li\u003e\n\u003cli\u003eWhen using original tires, wheel offset spacers may be required\u003c\/li\u003e\n\u003cli\u003ePart number 10210003\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841415139407,"sku":"10210003","price":2358.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000219.jpg?v=1789943921"},{"product_id":"kw-coilover-kit-v1-for-03-1994-05-1995-audi-80-avant-8c5-b4-10210017","title":"KW V1 Coilover Kit - Audi 80 Avant (B4) [10210017]","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi 80 Avant (B4).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: RS2 quattro\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi 80 Avant (B4)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable on the front and rear axles (threaded strut housings)\u003c\/li\u003e\n\u003cli\u003eWhen using original tires, wheel offset spacers may be required\u003c\/li\u003e\n\u003cli\u003ePart number 10210017\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841415172175,"sku":"10210017","price":2505.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000251.jpg?v=1789943921"},{"product_id":"kw-coilover-kit-v1-for-09-2012-audi-a4-avant-8k5-b8-w-deactivation-for-electronic-dampers-1021000r","title":"KW V1 Coilover Kit - Audi A4 Avant (B8) (EDC Deactivation Included)","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A4 Avant (B8).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eIncludes the deactivation kit for the factory electronic dampers\u003c\/li\u003e\n\u003cli\u003eSuits engines: RS4 quattro\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A4 Avant (B8)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eElectronic damping control has to be deactivated. Deactivation kit is included in the delivery.\u003c\/li\u003e\n\u003cli\u003eIn Variant 2, hardness adjustment for front axle only in not installed condition possible\u003c\/li\u003e\n\u003cli\u003ePart number 1021000R\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841415204943,"sku":"1021000R","price":2582.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000236.jpg?v=1789943921"},{"product_id":"kw-coilover-kit-v1-for-09-1991-audi-80-avant-8c5-b4-10210015","title":"KW V1 Coilover Kit - Audi 80 Avant (B4) [10210015]","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi 80 Avant (B4).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: 2.0 quattro\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi 80 Avant (B4)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable on the front and rear axles (threaded strut housings)\u003c\/li\u003e\n\u003cli\u003eTo identify the suspension struts, measure the diameter of the strut mounting screw at the steering knuckle. Screw diameter either M12 or M14\u003c\/li\u003e\n\u003cli\u003eWhen using original tires, wheel offset spacers may be required\u003c\/li\u003e\n\u003cli\u003ePart number 10210015\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841415237711,"sku":"10210015","price":2358.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000249.jpg?v=1789943923"},{"product_id":"kw-coilover-kit-v1-for-05-2012-audi-a3-8v1-for-8vk-1021000g","title":"KW V1 Coilover Kit - Audi A3 (8V), Audi A3 Saloon (8V), Audi A3 (50mm front axle strut) [1021000G]","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A3 (8V), Audi A3 Saloon (8V), Audi A3.\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eThis part number suits: 50mm front axle strut\u003c\/li\u003e\n\u003cli\u003eSuits engines: 1.6 TDI, 1.8 TFSI, 2.0 TDI, 2.0 TFSI, 1.2 TFSI, 30 TDI, 30 TFSI, 35 TDI, 35 TFSI, 40 TFSI\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A3 (8V), Audi A3 Saloon (8V), Audi A3\u003c\/li\u003e\n\u003cli\u003eOnly for cars with a clamp diameter of 50mm on the front axle\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eFor cars which have electronic dampers, make sure they are shut down. Specific electronical damper shut-downs are available from KW. Please check our accessories list\u003c\/li\u003e\n\u003cli\u003ePart number 1021000G\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSeveral part numbers cover this vehicle. Check the specification against your car before ordering, or ask us.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841415270479,"sku":"1021000G","price":2022.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000229.jpg?v=1789943922"},{"product_id":"kw-coilover-kit-v1-for-05-2012-audi-a3-8v1-for-8vk-1021000n","title":"KW V1 Coilover Kit - Audi A3 (8V), Audi A3 Saloon (8V), Audi A3 (55mm front axle strut) [1021000N]","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A3 (8V), Audi A3 Saloon (8V), Audi A3.\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eThis part number suits: 55mm front axle strut\u003c\/li\u003e\n\u003cli\u003eSuits engines: 1.0 TFSI, 1.2 TFSI, 1.4 TFSI, 1.4 TSI, 1.5 TFSI, 1.6 TDI, 1.8 TFSI, 2.0 TDI, 2.0 TFSI, 30 TDI, 30 TFSI, 35 TFSI, 40 TFSI\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A3 (8V), Audi A3 Saloon (8V), Audi A3\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eFor cars which have electronic dampers, make sure they are shut down. Specific electronical damper shut-downs are available from KW. Please check our accessories list\u003c\/li\u003e\n\u003cli\u003eOnly for cars with a clamp diameter of 55mm on the front axle\u003c\/li\u003e\n\u003cli\u003ePart number 1021000N\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSeveral part numbers cover this vehicle. Check the specification against your car before ordering, or ask us.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841415303247,"sku":"1021000N","price":2022.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000233.jpg?v=1789943924"},{"product_id":"kw-coilover-kit-v1-for-04-2010-06-2015-audi-a5-convertible-8f7-w-deactivation-for-electronic-dampers-1021000q","title":"KW V1 Coilover Kit - Audi A5 (8T) (EDC Deactivation Included)","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A5 (8T).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eIncludes the deactivation kit for the factory electronic dampers\u003c\/li\u003e\n\u003cli\u003eSuits engines: RS5 quattro\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A5 (8T)\u003c\/li\u003e\n\u003cli\u003eDampers are adjusted by easily operating adjustment wheels. Rebound is only adjustable if the top of the piston rod is accessible. This will depend on the vehicle construction.\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eElectronic damping control has to be deactivated. Deactivation kit is included in the delivery.\u003c\/li\u003e\n\u003cli\u003eIn Variant 2, hardness adjustment for front axle only in not installed condition possible\u003c\/li\u003e\n\u003cli\u003ePart number 1021000Q\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAudi A5, 2010 to 2016\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841415336015,"sku":"1021000Q","price":2638.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000235.jpg?v=1789943923"},{"product_id":"kw-coilover-kit-v1-for-05-2012-audi-a3-8v1-for-8vk-w-deactivation-for-electronic-dampers-1021000v","title":"KW V1 Coilover Kit - Audi A3 (8V), Audi A3 Saloon (8V), Audi A3 (EDC Deactivation Included, 55mm front axle strut)","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A3 (8V), Audi A3 Saloon (8V), Audi A3.\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eIncludes the deactivation kit for the factory electronic dampers\u003c\/li\u003e\n\u003cli\u003eThis part number suits: 55mm front axle strut\u003c\/li\u003e\n\u003cli\u003eSuits engines: 1.6 TDI, 1.8 TFSI, 2.0 TDI, 2.0 TFSI, 1.2 TFSI, 30 TDI, 30 TFSI, 35 TDI, 35 TFSI, 40 TFSI\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A3 (8V), Audi A3 Saloon (8V), Audi A3\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eElectronic damping control has to be deactivated. Deactivation kit is included in the delivery.\u003c\/li\u003e\n\u003cli\u003eOnly for cars with a clamp diameter of 55mm on the front axle\u003c\/li\u003e\n\u003cli\u003ePart number 1021000V\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSeveral part numbers cover this vehicle. Check the specification against your car before ordering, or ask us.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841415368783,"sku":"1021000V","price":2295.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000240.jpg?v=1789943924"},{"product_id":"kw-coilover-kit-v1-for-04-2008-audi-a6-avant-4f5-c6-1021000s","title":"KW V1 Coilover Kit - Audi A6 (C6) (Deactivation kit included)","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A6 (C6).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eThis part number suits: Deactivation kit included\u003c\/li\u003e\n\u003cli\u003eSuits engines: RS6 quattro\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A6 (C6)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eElectronic damping control has to be deactivated. Deactivation kit is included in the delivery.\u003c\/li\u003e\n\u003cli\u003eIn Variant 2, hardness adjustment for front axle only in not installed condition possible\u003c\/li\u003e\n\u003cli\u003ePart number 1021000S\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAudi A6, 2008 to 2010\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSeveral part numbers cover this vehicle. Check the specification against your car before ordering, or ask us.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841415401551,"sku":"1021000S","price":2736.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000237.jpg?v=1789943923"},{"product_id":"kw-coilover-kit-v1-for-05-2012-audi-a3-8v1-for-8vk-w-deactivation-for-electronic-dampers-1021000x","title":"KW V1 Coilover Kit - Audi A3 (8V), Audi A3 Saloon (8V), Audi A3 (EDC Deactivation Included) [1021000X]","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A3 (8V), Audi A3 Saloon (8V), Audi A3.\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eIncludes the deactivation kit for the factory electronic dampers\u003c\/li\u003e\n\u003cli\u003eSuits engines: 1.0 TFSI, 1.2 TFSI, 1.4 TFSI, 1.4 TSI, 1.5 TFSI, 1.6 TDI, 1.8 TFSI, 2.0 TDI, 2.0 TFSI, 30 TFSI, 35 TFSI\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A3 (8V), Audi A3 Saloon (8V), Audi A3\u003c\/li\u003e\n\u003cli\u003eOnly for cars with a clamp diameter of 50mm on the front axle\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eElectronic damping control has to be deactivated. Deactivation kit is included in the delivery.\u003c\/li\u003e\n\u003cli\u003ePart number 1021000X\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841415467087,"sku":"1021000X","price":2295.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000241.jpg?v=1789943924"},{"product_id":"kw-coilover-kit-v1-for-03-2003-audi-a3-sportback-8pa-10210070","title":"KW V1 Coilover Kit - Audi A3 (8P), Volkswagen Golf (1K) [10210070]","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A3 (8P), Volkswagen Golf (1K).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: 2.0 TDI, 2.0 TDI 16V, 2.0 TFSI, 1.6 TDI, 1.9 TDI, 2.0, 2.5\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A3 (8P), Volkswagen Golf (1K)\u003c\/li\u003e\n\u003cli\u003eOnly for cars with a clamp diameter of 50mm on the front axle\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eFor cars which have electronic dampers, make sure they are shut down. Specific electronical damper shut-downs are available from KW. Please check our accessories list\u003c\/li\u003e\n\u003cli\u003ePart number 10210070\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAudi A3, 2004 to 2013\u003c\/li\u003e\n\u003cli\u003eVolkswagen Golf, 2005 to 2009\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841415434319,"sku":"10210070","price":2022.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000286.jpg?v=1789943923"},{"product_id":"kw-coilover-kit-v1-for-05-2000-09-2001-audi-a4-avant-8d5-b5-10210021","title":"KW V1 Coilover Kit - Audi A4 Avant (B5)","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A4 Avant (B5).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: RS4 quattro\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A4 Avant (B5)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable on the front and rear axles (threaded strut housings)\u003c\/li\u003e\n\u003cli\u003eIn Variant 2, hardness adjustment for front axle only in not installed condition possible\u003c\/li\u003e\n\u003cli\u003ePart number 10210021\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841415499855,"sku":"10210021","price":2064.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000255.jpg?v=1789943924"},{"product_id":"kw-coilover-kit-v1-for-05-2012-audi-a3-8v1-for-8vk-1021000j","title":"KW V1 Coilover Kit - Audi A3 (8V), Audi A3 Saloon (8V), Audi A3 (50mm front axle strut) [1021000J]","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A3 (8V), Audi A3 Saloon (8V), Audi A3.\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eThis part number suits: 50mm front axle strut\u003c\/li\u003e\n\u003cli\u003eSuits engines: 1.0 TFSI, 1.2 TFSI, 1.4 TFSI, 1.4 TSI, 1.5 TFSI, 1.6 TDI, 1.8 TFSI, 2.0 TDI, 2.0 TFSI, 30 TDI, 30 TFSI, 35 TFSI, 40 TFSI\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A3 (8V), Audi A3 Saloon (8V), Audi A3\u003c\/li\u003e\n\u003cli\u003eOnly for cars with a clamp diameter of 50mm on the front axle\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eFor cars which have electronic dampers, make sure they are shut down. Specific electronical damper shut-downs are available from KW. Please check our accessories list\u003c\/li\u003e\n\u003cli\u003ePart number 1021000J\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSeveral part numbers cover this vehicle. Check the specification against your car before ordering, or ask us.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841415532623,"sku":"1021000J","price":2022.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000230.jpg?v=1789943926"},{"product_id":"kw-coilover-kit-v1-for-05-2012-audi-a3-8v1-for-8vk-w-deactivation-for-electronic-dampers-1021000y","title":"KW V1 Coilover Kit - Audi A3 (8V), Audi A3 Saloon (8V), Audi A3 (EDC Deactivation Included, 50mm front axle strut)","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A3 (8V), Audi A3 Saloon (8V), Audi A3.\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eIncludes the deactivation kit for the factory electronic dampers\u003c\/li\u003e\n\u003cli\u003eThis part number suits: 50mm front axle strut\u003c\/li\u003e\n\u003cli\u003eSuits engines: 1.6 TDI, 1.8 TFSI, 2.0 TDI, 2.0 TFSI, 1.2 TFSI, 30 TDI, 30 TFSI, 35 TDI, 35 TFSI, 40 TFSI\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A3 (8V), Audi A3 Saloon (8V), Audi A3\u003c\/li\u003e\n\u003cli\u003eOnly for cars with a clamp diameter of 50mm on the front axle\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eElectronic damping control has to be deactivated. Deactivation kit is included in the delivery.\u003c\/li\u003e\n\u003cli\u003ePart number 1021000Y\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSeveral part numbers cover this vehicle. Check the specification against your car before ordering, or ask us.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841415565391,"sku":"1021000Y","price":2295.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000242.jpg?v=1789943927"},{"product_id":"kw-coilover-kit-v1-for-09-2011-audi-a6-avant-4g5-4gd-c7-1021000e","title":"KW V1 Coilover Kit - Audi A6 (4G) [1021000E]","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A6 (4G).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: 2.0 TDI, 2.0 TDI quattro, 2.0 TFSI quattro, 2.8 FSI quattro, 3.0 TDI, 3.0 TDI quattro, 3.0 TFSI quattro\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A6 (4G)\u003c\/li\u003e\n\u003cli\u003eNot for cars with electronic damping\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eNot for vehicles with automatic self leveling control \/ air suspension\u003c\/li\u003e\n\u003cli\u003eIn Variant 2, hardness adjustment for front axle only in not installed condition possible\u003c\/li\u003e\n\u003cli\u003ePart number 1021000E\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAudi A6, 2015 to 2018\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841415598159,"sku":"1021000E","price":2358.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000228.jpg?v=1789943926"},{"product_id":"kw-coilover-kit-v1-for-06-1989-audi-80-89-89q-8a-b3-10210013","title":"KW V1 Coilover Kit - Audi 80 (B3), Audi 90 (B3), Audi Coupé (89) [10210013]","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi 80 (B3), Audi 90 (B3), Audi Coupé (89).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: 1.8 E quattro, 1.8 quattro, 1.8 S quattro, 2.0 E 16V quattro, 2.0 E quattro, 2.0 quattro, 2.3 quattro, 2.0 20 V quattro, 2.2 E quattro, 2.3 E 20V quattro, 2.3 E quattro, 2.2 quattro, 2.3 20V quattro\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi 80 (B3), Audi 90 (B3), Audi Coupé (89)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable on the front and rear axles (threaded strut housings)\u003c\/li\u003e\n\u003cli\u003eTo identify the suspension struts, measure the diameter of the strut mounting screw at the steering knuckle. Screw diameter either M12 or M14\u003c\/li\u003e\n\u003cli\u003eWhen using original tires, wheel offset spacers may be required\u003c\/li\u003e\n\u003cli\u003ePart number 10210013\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841415630927,"sku":"10210013","price":2169.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000247.jpg?v=1789943924"},{"product_id":"kw-coilover-kit-v1-for-08-1984-1988-audi-100-44-44q-c3-fa-struts-in-exchange-10210010","title":"KW V1 Coilover Kit - Audi 100 (C3, 44, 44Q), Audi 100 Avant (C3, 44, 44Q), Audi 200 (44, 44Q) and 1 more [10210010]","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi 100 (C3, 44, 44Q), Audi 100 Avant (C3, 44, 44Q), Audi 200 (44, 44Q) and others.\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: 1.8, 1.8 Cat, 1.8 Cat quattro, 1.8 quattro, 2.0, 2.0 Cat, 2.0 D, 2.0 D Turbo, 2.1, 2.2, 2.2 E quattro, 2.2 E Turbo quattro, 2.2 quattro, 2.2 Turbo, 2.3, 2.3 E, 2.3 E quattro, 2.3 quattro, 2.0 E, 2.0 E Cat, 2.0 TD, 2.2 Turbo quattro, 2.1 5E, 2.1 Turbo, 2.1 Turbo quattro\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi 100 (C3, 44, 44Q), Audi 100 Avant (C3, 44, 44Q), Audi 200 (44, 44Q), Audi 200 Avant (44, 44Q)\u003c\/li\u003e\n\u003cli\u003eOriginal struts need to be sent in advance for modification\u003c\/li\u003e\n\u003cli\u003eNot for vehicles with automatic self leveling control \/ air suspension\u003c\/li\u003e\n\u003cli\u003eHeight adjustable on the front and rear axles (threaded strut housings)\u003c\/li\u003e\n\u003cli\u003eProduction on demand. Please ask for delivery time.\u003c\/li\u003e\n\u003cli\u003eCoilover kits where the strut housings are being modified are only availible in galvanized finish.\u003c\/li\u003e\n\u003cli\u003ePart number 10210010\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841415696463,"sku":"10210010","price":2386.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000244.jpg?v=1789943925"},{"product_id":"kw-coilover-kit-v1-for-09-2011-audi-a6-avant-4g5-4gd-c7-1021000d","title":"KW V1 Coilover Kit - Audi A6 (4G) [1021000D]","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A6 (4G).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: 1.8 TFSI, 2.0 TDI, 2.0 TFSI, 2.8 FSI, 2.8 FSI quattro\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A6 (4G)\u003c\/li\u003e\n\u003cli\u003eNot for cars with electronic damping\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eNot for vehicles with automatic self leveling control \/ air suspension\u003c\/li\u003e\n\u003cli\u003eIn Variant 2, hardness adjustment for front axle only in not installed condition possible\u003c\/li\u003e\n\u003cli\u003ePart number 1021000D\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAudi A6, 2015 to 2018\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841415663695,"sku":"1021000D","price":2358.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000227.jpg?v=1789943927"},{"product_id":"kw-coilover-kit-v1-for-09-2008-audi-q5-8rb-10210089","title":"KW V1 Coilover Kit - Audi Q5 (8R) [10210089]","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi Q5 (8R).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: 2.0 TDI, 2.0 TDI quattro, 2.0 TFSI quattro\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi Q5 (8R)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eFor cars which have electronic dampers, make sure they are shut down. Specific electronical damper shut-downs are available from KW. Please check our accessories list\u003c\/li\u003e\n\u003cli\u003eIn Variant 2, hardness adjustment for front axle only in not installed condition possible\u003c\/li\u003e\n\u003cli\u003ePart number 10210089\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAudi Q5, 2015 to 2017\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841415761999,"sku":"10210089","price":2358.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000292.jpg?v=1789943926"},{"product_id":"kw-coilover-kit-v1-for-09-1990-12-1996-audi-coupe-89-8b-10210014","title":"KW V1 Coilover Kit - Audi Coupé (89) [10210014]","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi Coupé (89).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: 2.3 20V quattro, 2.3 quattro, 2.6 quattro, 2.8 quattro, S2 quattro\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi Coupé (89)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable on the front and rear axles (threaded strut housings)\u003c\/li\u003e\n\u003cli\u003eTo identify the suspension struts, measure the diameter of the strut mounting screw at the steering knuckle. Screw diameter either M12 or M14\u003c\/li\u003e\n\u003cli\u003eWhen using original tires, wheel offset spacers may be required\u003c\/li\u003e\n\u003cli\u003ePart number 10210014\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841415729231,"sku":"10210014","price":2169.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000248.jpg?v=1789943925"},{"product_id":"kw-coilover-kit-v1-for-04-2006-audi-a4-b7-convertible-8he-10210061","title":"KW V1 Coilover Kit - Audi A4 Avant (8E), Audi A4 B7","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A4 Avant (8E), Audi A4 B7.\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: RS4 quattro\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A4 Avant (8E), Audi A4 B7\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eIn Variant 2, hardness adjustment for front axle only in not installed condition possible\u003c\/li\u003e\n\u003cli\u003ePart number 10210061\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841415794767,"sku":"10210061","price":2225.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000281.jpg?v=1789943927"},{"product_id":"kw-coilover-kit-v1-for-02-2005-audi-a6-avant-4f5-c6-10210056","title":"KW V1 Coilover Kit - Audi A6 (C6) [10210056]","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A6 (C6).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: 2.7 TDI, 2.7 TDI quattro, 3.0 TDI quattro, 3.0 TFSI quattro, 4.2 FSI quattro, 4.2 quattro\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A6 (C6)\u003c\/li\u003e\n\u003cli\u003eNot for cars with electronic damping\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eNot for vehicles with automatic self leveling control \/ air suspension\u003c\/li\u003e\n\u003cli\u003ePart number 10210056\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAudi A6, 2005 to 2011\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841415827535,"sku":"10210056","price":2316.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000277.jpg?v=1789943926"},{"product_id":"kw-coilover-kit-v1-for-04-2006-audi-a4-8ec-b7-10210051","title":"KW V1 Coilover Kit - Audi A4 (B7)","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A4 (B7).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: RS4 quattro\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A4 (B7)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eIn Variant 2, hardness adjustment for front axle only in not installed condition possible\u003c\/li\u003e\n\u003cli\u003ePart number 10210051\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAudi A4, 2006 to 2008\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841415860303,"sku":"10210051","price":2225.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000274.jpg?v=1789943929"},{"product_id":"kw-coilover-kit-v1-for-06-2002-audi-a6-4b2-c5-10210053","title":"KW V1 Coilover Kit - Audi A6 (C5) [10210053]","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A6 (C5).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: RS6 quattro, RS6 plus quattro\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A6 (C5)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable on the front and rear axles (threaded strut housings)\u003c\/li\u003e\n\u003cli\u003ePart number 10210053\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAudi A6, 2002 to 2004\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841415893071,"sku":"10210053","price":2106.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000275.jpg?v=1789943928"},{"product_id":"kw-coilover-kit-v1-for-03-2014-audi-a3-convertible-8v7-8ve-w-deactivation-for-electronic-dampers-1021000z","title":"KW V1 Coilover Kit - Audi A3 (8V) (EDC Deactivation Included, 55mm front axle strut)","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A3 (8V).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eIncludes the deactivation kit for the factory electronic dampers\u003c\/li\u003e\n\u003cli\u003eThis part number suits: 55mm front axle strut\u003c\/li\u003e\n\u003cli\u003eSuits engines: 1.4 TFSI, 1.4 TSI, 1.5 TFSI, 1.8 TFSI, 2.0 TFSI, 35 TFSI, 40 TFSI\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A3 (8V)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eElectronic damping control has to be deactivated. Deactivation kit is included in the delivery.\u003c\/li\u003e\n\u003cli\u003eOnly for cars with a clamp diameter of 55mm on the front axle\u003c\/li\u003e\n\u003cli\u003ePart number 1021000Z\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAudi A3, 2015 to 2019\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSeveral part numbers cover this vehicle. Check the specification against your car before ordering, or ask us.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841415925839,"sku":"1021000Z","price":2295.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000243.jpg?v=1789943928"},{"product_id":"kw-coilover-kit-v1-for-03-2003-audi-a4-avant-8e5-b6-10210065","title":"KW V1 Coilover Kit - Audi A4 Avant (8E), Audi A4","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A4 Avant (8E), Audi A4.\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: 2.7 S4 quattro, S4 quattro\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A4 Avant (8E), Audi A4\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eIn Variant 2, hardness adjustment for front axle only in not installed condition possible\u003c\/li\u003e\n\u003cli\u003ePart number 10210065\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841415958607,"sku":"10210065","price":2225.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000284.jpg?v=1789943927"},{"product_id":"kw-coilover-kit-v1-for-03-2011-audi-a6-4g2-4gc-c7-1021000b","title":"KW V1 Coilover Kit - Audi A6 (4G) [1021000B]","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A6 (4G).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: 2.0 TDI, 2.0 TDI quattro, 2.0 TFSI, 2.0 TFSI quattro, 2.8 FSI quattro, 3.0 TDI, 3.0 TDI quattro, 3.0 TFSI quattro\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A6 (4G)\u003c\/li\u003e\n\u003cli\u003eNot for cars with electronic damping\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eNot for vehicles with automatic self leveling control \/ air suspension\u003c\/li\u003e\n\u003cli\u003eIn Variant 2, hardness adjustment for front axle only in not installed condition possible\u003c\/li\u003e\n\u003cli\u003ePart number 1021000B\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAudi A6, 2015 to 2018\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841416024143,"sku":"1021000B","price":2358.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000226.jpg?v=1789943930"},{"product_id":"kw-coilover-kit-v1-for-04-2008-audi-a6-avant-4f5-c6-1021000l","title":"KW V1 Coilover Kit - Audi A6 (C6) (EDC deactivation)","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A6 (C6).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eThis part number suits: Electronic dampers must be deactivated\u003c\/li\u003e\n\u003cli\u003eSuits engines: RS6 quattro\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A6 (C6)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eFor cars which have electronic dampers, make sure they are shut down. Specific electronical damper shut-downs are available from KW. Please check our accessories list\u003c\/li\u003e\n\u003cli\u003eIn Variant 2, hardness adjustment for front axle only in not installed condition possible\u003c\/li\u003e\n\u003cli\u003ePart number 1021000L\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAudi A6, 2008 to 2010\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSeveral part numbers cover this vehicle. Check the specification against your car before ordering, or ask us.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841415991375,"sku":"1021000L","price":2302.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000231.jpg?v=1789943931"},{"product_id":"kw-coilover-kit-v1-for-11-2000-audi-a4-avant-8e5-b6-10210057","title":"KW V1 Coilover Kit - Audi A4 (B6)","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A4 (B6).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: 1.8 T quattro, 3.0 quattro, 2.0 TFSI quattro\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A4 (B6)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eNot for vehicles with automatic self leveling control \/ air suspension\u003c\/li\u003e\n\u003cli\u003eIn Variant 2, hardness adjustment for front axle only in not installed condition possible\u003c\/li\u003e\n\u003cli\u003ePart number 10210057\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAudi A4, 2002 to 2005\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841416089679,"sku":"10210057","price":2162.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000278.jpg?v=1789943930"},{"product_id":"kw-coilover-kit-v1-for-09-1991-audi-80-8c2-b4-10210019","title":"KW V1 Coilover Kit - Audi 80 (B4)","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi 80 (B4).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: 1.6, 1.6 E, 1.9 TD, 1.9 TDI, 2.0, 2.0 E, 2.0 E 16V, 2.3 E, 2.6, 2.8 Alternative part numbers 10210919\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi 80 (B4)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable on the front and rear axles (threaded strut housings)\u003c\/li\u003e\n\u003cli\u003eTo identify the suspension struts, measure the diameter of the strut mounting screw at the steering knuckle. Screw diameter either M12 or M14\u003c\/li\u003e\n\u003cli\u003eWhen using original tires, wheel offset spacers may be required\u003c\/li\u003e\n\u003cli\u003ePart number 10210019\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAudi 80, 1992 to 1995\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841416056911,"sku":"10210019","price":2358.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000253.jpg?v=1789943928"},{"product_id":"kw-coilover-kit-v1-for-03-2011-audi-a6-4g2-4gc-c7-1021000a","title":"KW V1 Coilover Kit - Audi A6 (4G) [1021000A]","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A6 (4G).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: 1.8 TFSI, 2.0 TDI, 2.0 TFSI, 2.0 TFSI quattro, 2.8 FSI, 2.8 FSI quattro, 3.0 TDI quattro, 3.0 TFSI quattro\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A6 (4G)\u003c\/li\u003e\n\u003cli\u003eNot for cars with electronic damping\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eNot for vehicles with automatic self leveling control \/ air suspension\u003c\/li\u003e\n\u003cli\u003eIn Variant 2, hardness adjustment for front axle only in not installed condition possible\u003c\/li\u003e\n\u003cli\u003ePart number 1021000A\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAudi A6, 2015 to 2018\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841416122447,"sku":"1021000A","price":2358.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000225.jpg?v=1789943931"},{"product_id":"kw-coilover-kit-v1-for-03-2003-audi-a4-8e2-b6-10210035","title":"KW V1 Coilover Kit - Audi A4 (B6), Audi A4 (B7) [10210035]","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A4 (B6), Audi A4 (B7).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: S4 quattro\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A4 (B6), Audi A4 (B7)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eIn Variant 2, hardness adjustment for front axle only in not installed condition possible\u003c\/li\u003e\n\u003cli\u003ePart number 10210035\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAudi A4, 2003 to 2008\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841416187983,"sku":"10210035","price":2225.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000264.jpg?v=1789943929"},{"product_id":"kw-coilover-kit-v1-for-01-1997-audi-a6-4b2-c5-10210011","title":"KW V1 Coilover Kit - Audi A6 (C5) [10210011]","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A6 (C5).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: 1.8, 1.9 TDI, 2.4, 2.5 TDI, 2.7 T, 2.8, 3.0, 3.7, 1.8 T, 2.0 TDI, 2.8 V6\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A6 (C5)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eNot for vehicles with automatic self leveling control \/ air suspension\u003c\/li\u003e\n\u003cli\u003ePart number 10210011\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAudi A6, 1997 to 2004\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841416155215,"sku":"10210011","price":1805.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000245.jpg?v=1789943931"},{"product_id":"kw-coilover-kit-v1-for-02-2005-audi-a6-avant-4f5-c6-10210055","title":"KW V1 Coilover Kit - Audi A6 (C6) [10210055]","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A6 (C6).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: 2.0 TDI, 2.0 TFSI, 2.4, 2.4 quattro, 2.7 TDI, 2.8 FSI, 2.8 FSI quattro, 3.0, 3.0 quattro, 3.0 TFSI quattro, 3.2 FSI, 3.2 FSI quattro\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A6 (C6)\u003c\/li\u003e\n\u003cli\u003eNot for cars with electronic damping\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eNot for vehicles with automatic self leveling control \/ air suspension\u003c\/li\u003e\n\u003cli\u003ePart number 10210055\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAudi A6, 2005 to 2011\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841416220751,"sku":"10210055","price":2316.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000276.jpg?v=1789943929"},{"product_id":"kw-coilover-kit-v1-for-09-2006-audi-tt-8j3-10210062","title":"KW V1 Coilover Kit - Audi TT (8J) [10210062]","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi TT (8J).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: 1.8 TFSI, 2.0 TFSI\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi TT (8J)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eFor cars which have electronic dampers, make sure they are shut down. Specific electronical damper shut-downs are available from KW. Please check our accessories list\u003c\/li\u003e\n\u003cli\u003eOnly for cars with a clamp diameter of 55mm on the front axle\u003c\/li\u003e\n\u003cli\u003ePart number 10210062\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAudi TT, 2006 to 2014\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841416253519,"sku":"10210062","price":2022.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000282.jpg?v=1789943931"},{"product_id":"kw-coilover-kit-v1-for-12-1990-12-1997-audi-100-4a2-c4-fa-struts-in-exchange-10210008","title":"KW V1 Coilover Kit - Audi A6 (C4)","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A6 (C4).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: 2.0, 2.0 E, 2.0 E 16V, 2.3 E, 2.4 D, 2.5 TDI, 2.6, 2.8 E, 1.8, 1.9 TDI, 2.0 16V, 2.3, 2.4, 2.8\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A6 (C4)\u003c\/li\u003e\n\u003cli\u003eOriginal struts need to be sent in advance for modification\u003c\/li\u003e\n\u003cli\u003eNot for vehicles with automatic self leveling control \/ air suspension\u003c\/li\u003e\n\u003cli\u003eHeight adjustable on the front and rear axles (threaded strut housings)\u003c\/li\u003e\n\u003cli\u003eProduction on demand. Please ask for delivery time.\u003c\/li\u003e\n\u003cli\u003eCoilover kits where the strut housings are being modified are only availible in galvanized finish.\u003c\/li\u003e\n\u003cli\u003ePart number 10210008\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAudi A6, 1994 to 1997\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841416286287,"sku":"10210008","price":2386.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000223.jpg?v=1789943931"},{"product_id":"kw-coilover-kit-v1-for-03-2003-audi-a3-sportback-8pa-10210040","title":"KW V1 Coilover Kit - Audi A3 (8P), Volkswagen Golf (1K) [10210040]","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A3 (8P), Volkswagen Golf (1K).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: 2.0 TDI, 2.0 TDI 16V, 2.0 TFSI, 1.6 TDI, 1.9 TDI, 2.0, 2.0 GTI, 2.0 TDI 16V 4motion, 2.0 TDI 4motion, 2.5, 3.2 R32 4motion, 2.0 R 4motion, 2.0 TFSI 4motion, 2.0 R\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A3 (8P), Volkswagen Golf (1K)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eFor cars which have electronic dampers, make sure they are shut down. Specific electronical damper shut-downs are available from KW. Please check our accessories list\u003c\/li\u003e\n\u003cli\u003eOnly for cars with a clamp diameter of 55mm on the front axle\u003c\/li\u003e\n\u003cli\u003ePart number 10210040\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAudi A3, 2004 to 2013\u003c\/li\u003e\n\u003cli\u003eVolkswagen Golf, 2005 to 2009\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841416351823,"sku":"10210040","price":2022.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000268.jpg?v=1789943932"},{"product_id":"kw-coilover-kit-v1-for-03-1994-09-2002-audi-a8-4d2-4d8-10210024","title":"KW V1 Coilover Kit - Audi A8 (D2)","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A8 (D2).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: 2.5 TDI, 2.5 TDI quattro, 2.8, 2.8 quattro, 3.3 TDI quattro, 3.7, 3.7 quattro, 4.2 40V quattro, 4.2 quattro, 6.0 W12 quattro, S 8 quattro, S8 quattro\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A8 (D2)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eNot for vehicles with automatic self leveling control \/ air suspension\u003c\/li\u003e\n\u003cli\u003ePart number 10210024\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAudi A8, 1995 to 2002\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841416384591,"sku":"10210024","price":2358.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000257.jpg?v=1789943934"},{"product_id":"kw-coilover-kit-v1-for-02-1995-audi-a4-avant-8d5-b5-10210012","title":"KW V1 Coilover Kit - Audi A4 (B5) [10210012]","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A4 (B5).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: 1.8 quattro, 1.8 T quattro, 1.9 TDI quattro, 2.4 quattro, 2.6 quattro, 2.8 quattro\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A4 (B5)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable on the front and rear axles (threaded strut housings)\u003c\/li\u003e\n\u003cli\u003ePart number 10210012\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAudi A4, 1995 to 2001\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841416319055,"sku":"10210012","price":1693.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000246.jpg?v=1789943930"},{"product_id":"kw-coilover-kit-v1-for-1998-audi-a4-8d2-b5-10210037","title":"KW V1 Coilover Kit - Audi A4 (B5) [10210037]","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A4 (B5).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: 1.8, 2.4, 2.5 TDI, 2.6, 2.8\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A4 (B5)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable on the front and rear axles (threaded strut housings)\u003c\/li\u003e\n\u003cli\u003ePart number 10210037\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAudi A4, 1995 to 2001\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841416417359,"sku":"10210037","price":1693.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000265.jpg?v=1789943931"},{"product_id":"kw-coilover-kit-v1-for-05-2009-audi-tt-8j3-10210063","title":"KW V1 Coilover Kit - Audi TT (8J) [10210063]","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi TT (8J).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: 2.0 TDI quattro, 2.0 TFSI quattro, 2.0 TTS quattro, 2.5 RS quattro, 3.2 V6 quattro\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi TT (8J)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eFor cars which have electronic dampers, make sure they are shut down. Specific electronical damper shut-downs are available from KW. Please check our accessories list\u003c\/li\u003e\n\u003cli\u003eOnly for cars with a clamp diameter of 55mm on the front axle\u003c\/li\u003e\n\u003cli\u003ePart number 10210063\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAudi TT, 2006 to 2014\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841416450127,"sku":"10210063","price":2022.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000283.jpg?v=1789943934"},{"product_id":"kw-coilover-kit-v1-for-10-1998-audi-tt-8n3-10210041","title":"KW V1 Coilover Kit - Audi TT (8N)","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi TT (8N).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: 1.8 T quattro\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi TT (8N)\u003c\/li\u003e\n\u003cli\u003eOnly for vehicles with ESP\u003c\/li\u003e\n\u003cli\u003eFor rear axle camber adjustment we recommend the installation of the car specific adjustable control arm set from KW. The part number for the control arm set is mention in the accessories list.\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eWhen using original tires, wheel offset spacers may be required\u003c\/li\u003e\n\u003cli\u003ePart number 10210041\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAudi TT, 1999 to 2006\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSeveral part numbers cover this vehicle. Check the specification against your car before ordering, or ask us.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841416482895,"sku":"10210041","price":1735.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000269.jpg?v=1789943934"},{"product_id":"kw-coilover-kit-v1-for-05-2012-audi-a3-limousine-8vs-8vm-w-deactivation-for-electronic-dampers-1021000t","title":"KW V1 Coilover Kit - Audi A3 (8V) (EDC Deactivation Included) [1021000T]","description":"\u003cp\u003eKW V1 Coilover Kit for the Audi A3 (8V).\u003c\/p\u003e\u003ch3\u003eAbout the KW V1\u003c\/h3\u003e\u003cp\u003eThe KW V1 is the entry coilover in the range and the one most cars end up on. The ride height is adjustable through a threaded strut body, while the damping is set by KW for that specific car and fixed from the factory, so there is nothing to tune after it is fitted.\u003c\/p\u003e\u003cp\u003eEach application gets its own spring rate and damper setup rather than a generic valving, which is what keeps a lowered car composed rather than brittle. The struts are stainless steel, and the height adjustment stays workable years later because of the trapezoid thread and composite collar.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eDamping set by KW for this vehicle, not adjustable\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eIncludes the deactivation kit for the factory electronic dampers\u003c\/li\u003e\n\u003cli\u003eSuits engines: 1.8 TFSI quattro, 2.0 TDI quattro, 2.0 TFSI quattro, S3 quattro, 1.6 TDI quattro, 40 TDI quattro, 40 TFSI quattro\u003c\/li\u003e\n\u003cli\u003eListed by KW for: Audi A3 (8V)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eElectronic damping control has to be deactivated. Deactivation kit is included in the delivery.\u003c\/li\u003e\n\u003cli\u003eOnly for cars with a clamp diameter of 55mm on the front axle\u003c\/li\u003e\n\u003cli\u003ePart number 1021000T\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAudi A3, 2015 to 2020\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841416581199,"sku":"1021000T","price":2295.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0000238.jpg?v=1789943936"}],"url":"https:\/\/www.heasmans.com.au\/collections\/kw-sale.oembed?page=10","provider":"Heasmans","version":"1.0","type":"link"}