{"title":"BMW F80 M3 Competition","description":"\u003cp\u003eSuspension, brakes and exhaust for the BMW F80 M3 Competition from Girodisc, KW and Akrapovič. Fitted at Sydenham or shipped Australia wide.\u003c\/p\u003e","products":[{"product_id":"handr-extended-wheel-bolt-m14x1-25-taper-head-3","title":"H\u0026R Extended Wheel Bolt M14x1.25 Taper Head [TF-M14x1.25-FM3]","description":"\u003cp\u003eH\u0026amp;R Extended Wheel Bolts for the H\u0026amp;R Extended Wheel Bolt M14x1.25 Taper Head.\u003c\/p\u003e\u003ch3\u003eAbout the H\u0026amp;R Extended Wheel Bolts\u003c\/h3\u003e\u003cp\u003eFitting a spacer moves the wheel away from the hub, so the original bolts no longer reach far enough to hold it safely. Extended bolts restore the thread engagement, with the same seat profile as the original so the wheel still centres correctly.\u003c\/p\u003e\u003cp\u003eBolts are priced individually and the length needed depends on the spacer width, which is listed in the specification. Thread size, length and seat type must be checked against your wheels and hubs before fitting.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIt has to be checked that the screw length outside of the wheels must be less that the width of the wheel spacers (inc the 9 minimum turns)\u003c\/li\u003e\n\u003cli\u003eBolt lengths below assume the original wheels\u003c\/li\u003e\n\u003cli\u003eFor a 5mm spacer, use bolt 14253501\u003c\/li\u003e\n\u003cli\u003eFor a 10mm spacer, use bolt 14254001\u003c\/li\u003e\n\u003cli\u003eFor a 12mm spacer, use bolt 14254001\u003c\/li\u003e\n\u003cli\u003eFor a 15mm spacer, use bolt 14254301\u003c\/li\u003e\n\u003cli\u003ePriced per bolt\u003c\/li\u003e\n\u003cli\u003eAvailable in silver or black\u003c\/li\u003e\n\u003cli\u003eHigh strength steel\u003c\/li\u003e\n\u003cli\u003eCorrect seat profile for a secure fit\u003c\/li\u003e\n\u003cli\u003ePart number TF-M14x1.25-FM3\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBMW M3 F80 Sedan, 2015 to 2018\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSet of H\u0026amp;R extended wheel bolts\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eConfirm thread size, length and seat type suit your wheels and hubs before fitting.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. H\u0026amp;R warranty applies.\u003c\/p\u003e","brand":"H\u0026R Suspension","offers":[{"title":"Default Title","offer_id":45855404523599,"sku":"TF-M14x1.25-FM3","price":9.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/TF-S-1_b2bb070c-33ad-4ea7-a3bc-65662d88fc1e.png?v=1781679966"},{"product_id":"handr-sport-springs-for-bmw-m3-type-f80","title":"H\u0026R VSS Height Adjustable Springs - BMW M3 Type F80","description":"\u003cp\u003eH\u0026amp;R VSS Height Adjustable Springs for the BMW M3 Type F80, adjustable 30-45mm front, 10-25mm rear.\u003c\/p\u003e\u003ch3\u003eAbout the H\u0026amp;R VSS Height Adjustable Springs\u003c\/h3\u003e\u003cp\u003eThe VSS system is a spring kit with an adjustable perch, so the ride height can be set anywhere within a range rather than fixed at one drop. The car keeps its factory dampers, and on cars with electronic damping that system keeps working.\u003c\/p\u003e\u003cp\u003eThe adjustment range for this vehicle is listed in the specification. Where a car is offered with and without adaptive dampers, the range differs, and both are listed.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdjustment range: 30-45mm front, 10-25mm rear\u003c\/li\u003e\n\u003cli\u003eIncludes Incl 'Competition\u003c\/li\u003e\n\u003cli\u003eHeight adjustable spring perches\u003c\/li\u003e\n\u003cli\u003eKeeps the factory dampers and any electronic damper control\u003c\/li\u003e\n\u003cli\u003eHardened and tempered spring steel\u003c\/li\u003e\n\u003cli\u003ePart number 23003-1-wc309\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBMW M3 F80 Sedan, 2015 to 2018\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH\u0026amp;R VSS Height Adjustable Springs\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eProfessional fitting and a wheel alignment are recommended after installation.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. H\u0026amp;R warranty applies.\u003c\/p\u003e","brand":"H\u0026R Suspension","offers":[{"title":"Default Title","offer_id":45855586287695,"sku":"23003-1-wc309","price":1815.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/x-HR-Gewindefedern-Stdandardbilder-6-Hinweistext-scaled_4666629c-e656-4376-9a87-6663f135b75b.jpg?v=1781680231"},{"product_id":"handr-sway-bar-for-bmw-m3-type-f80","title":"H\u0026R Sway Bar Kit - BMW M3 Type F80","description":"\u003cp\u003eH\u0026amp;R Sway Bar Kit for the BMW M3 Type F80.\u003c\/p\u003e\u003ch3\u003eAbout the H\u0026amp;R Sway Bar Kit\u003c\/h3\u003e\u003cp\u003eAn H\u0026amp;R Sway Bar Kit stiffens the car in roll, so it stays flatter through a corner and settles sooner afterwards. Because a sway bar only works when the two wheels on an axle move differently, ride quality over bumps is largely unchanged.\u003c\/p\u003e\u003cp\u003eMost bars carry more than one mounting hole, which lets the rate be adjusted after fitting. The bar thickness and the number of positions for this vehicle are listed in the specification.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e30mm front bar, 2 adjustment positions and 25mm rear bar, fixed rate\u003c\/li\u003e\n\u003cli\u003eIncludes Incl 'Competition\u003c\/li\u003e\n\u003cli\u003eDirect fit to the factory mounting points\u003c\/li\u003e\n\u003cli\u003ePart number 33802-2-wc303\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBMW M3 F80 Sedan, 2015 to 2018\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH\u0026amp;R Sway Bar Kit\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eProfessional fitting is recommended.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. H\u0026amp;R warranty applies.\u003c\/p\u003e","brand":"H\u0026R Suspension","offers":[{"title":"Default Title","offer_id":45855671484495,"sku":"33802-2-wc303","price":1430.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/Stabi_einzeln-1-scaled_0a7cb069-5ffd-458d-a9cb-5b9aed1f0dee.jpg?v=1781680355"},{"product_id":"handr-sport-springs-for-bmw-m3-type-f80-1","title":"H\u0026R Sport Springs - BMW M3 Type F80","description":"\u003cp\u003eH\u0026amp;R Sport Springs for the BMW M3 Type F80, lowering 30mm front, 20mm rear.\u003c\/p\u003e\u003ch3\u003eAbout the H\u0026amp;R Sport Springs\u003c\/h3\u003e\u003cp\u003eH\u0026amp;R Sport Springs lower the car to close the gap between the tyre and the guard, and firm up the rate so the body settles more quickly. The progressive rate means the spring stays comfortable over normal road use and only stiffens as it compresses, which is what keeps a lowered car liveable day to day.\u003c\/p\u003e\u003cp\u003eThey work with the factory dampers and use the standard mounting points, so nothing else has to change. The drop for this vehicle is listed in the specification.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLowering: 30mm front, 20mm rear\u003c\/li\u003e\n\u003cli\u003eIncludes Incl 'Competition\u003c\/li\u003e\n\u003cli\u003eProgressive spring rate\u003c\/li\u003e\n\u003cli\u003eHardened and tempered spring steel\u003c\/li\u003e\n\u003cli\u003eWorks with the factory dampers\u003c\/li\u003e\n\u003cli\u003ePart number 28802-2-wc222\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBMW M3 F80 Sedan, 2015 to 2018\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH\u0026amp;R Sport Springs\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eProfessional fitting and a wheel alignment are recommended after installation.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. H\u0026amp;R warranty applies.\u003c\/p\u003e","brand":"H\u0026R Suspension","offers":[{"title":"Default Title","offer_id":45856044417103,"sku":"28802-2-wc222","price":847.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/Tieferlegungsfedersatz_29cf1fbc-d572-4965-958b-5650551de972.jpg?v=1781680906"},{"product_id":"handr-edc-delete-kit-for-bmw-m3-type-f80","title":"H\u0026R EDC Delete Kit - BMW M3 Type F80","description":"\u003cp\u003eH\u0026amp;R EDC Delete Kit for the BMW M3 Type F80.\u003c\/p\u003e\u003ch3\u003eAbout the H\u0026amp;R EDC Delete Kit\u003c\/h3\u003e\u003cp\u003eWhen electronic dampers are replaced with conventional ones, the car keeps looking for a damper it can no longer find and puts a fault on the dash. The EDC Delete Kit stands in for that circuit so the car reads a normal system, leaving every other electronic system working as it was.\u003c\/p\u003e\u003cp\u003eIt plugs in, and it is application specific, so check the fitment before ordering.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrevents suspension fault messages when the electronic dampers are replaced with conventional ones\u003c\/li\u003e\n\u003cli\u003ePlug-in installation\u003c\/li\u003e\n\u003cli\u003eApplication specific\u003c\/li\u003e\n\u003cli\u003ePart number 93019-1-wc182\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBMW M3 F80 Sedan, 2015 to 2018\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH\u0026amp;R EDC Delete Kit\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eConfirm your vehicle runs adaptive\/EDC suspension before fitting.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. H\u0026amp;R warranty applies.\u003c\/p\u003e","brand":"H\u0026R Suspension","offers":[{"title":"Default Title","offer_id":45856185974863,"sku":"93019-1-wc182","price":1045.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/x-HR-elektr.-Stilllegungssatz-Standardbilder-3-Hinweistext-scaled_5f518135-69bf-4d0c-a7fc-595c41bc3ba6.jpg?v=1781681125"},{"product_id":"handr-coilover-kit-for-bmw-m3-type-f80","title":"H\u0026R Coilover Kit - BMW M3 Type F80","description":"\u003cp\u003eH\u0026amp;R Coilover Kit for the BMW M3 Type F80.\u003c\/p\u003e\u003ch3\u003eAbout the H\u0026amp;R Coilover Kit\u003c\/h3\u003e\u003cp\u003eAn H\u0026amp;R Coilover Kit replaces the spring and damper as one unit, with threaded bodies that let the ride height be set exactly where you want it. Damping is matched to the height range by H\u0026amp;R, and on some kits it is adjustable as well.\u003c\/p\u003e\u003cp\u003eKits are supplied for the front and rear of the car, with the perches and collars needed to set them up. The height range for this vehicle is listed in the specification.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLowering range: 35-50mm front, 30-50mm rear\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant construction\u003c\/li\u003e\n\u003cli\u003eComplete bolt-in kit\u003c\/li\u003e\n\u003cli\u003ePart number 28773-1-wc178\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBMW M3 F80 Sedan, 2015 to 2018\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH\u0026amp;R Coilover Kit\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eSet-up and a wheel alignment by a qualified workshop are recommended after fitting.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. H\u0026amp;R warranty applies.\u003c\/p\u003e","brand":"H\u0026R Suspension","offers":[{"title":"Default Title","offer_id":45856208257103,"sku":"28773-1-wc178","price":4070.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/x-HR-Gewindefahrwerk-Standardbilder-6-Hinweistext_b8e7fd72-25cf-4f92-aa00-5093ec23f029.jpg?v=1781681160"},{"product_id":"bmw-m3-f80-active-valve-sport-system-2014-18","title":"QuickSilver Sport Exhaust with Sound Architect - BMW M3 (F80) (2014-2018)","description":"\u003ch1\u003eQuickSilver Sport Exhaust with Sound Architect\u003c\/h1\u003e\u003cp\u003e\u003cstrong\u003eValved sound you can switch between quiet and loud.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eQuickSilver exhaust systems, hand built in the United Kingdom and made to suit the vehicles listed below.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e✓ Valve control to change the note on demand\u003cbr\u003e✓ Quiet enough for the commute, loud when you want it\u003cbr\u003e✓ Hand built in the UK\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBMW M3 (F80) Sedan CS, 2018 to 2018\u003cbr\u003eBMW M3 (F80) Sedan M3, 2015 to 2018\u003cbr\u003eBMW M3 (F80) Sedan Competition, 2016 to 2018\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhats included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e✓ 1 x QuickSilver Sport Exhaust with Sound Architect\u003cbr\u003e✓ Fitting instructions\u003c\/p\u003e\u003cp\u003e\u003cem\u003eProfessional fitting is recommended.\u003c\/em\u003e\u003c\/p\u003e","brand":"Quicksilver","offers":[{"title":"Default Title","offer_id":46758384173135,"sku":"BM443T","price":7575.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/BM444T-Sport-System-with-Sound-Architect-1-2_995e031d-cc3b-409e-a629-5c18e6af93c4.jpg?v=1789178278"},{"product_id":"handr-wheel-spacers-bmw-m3-type-f80","title":"H\u0026R Wheel Spacers - BMW M3 Type F80","description":"\u003cp\u003eH\u0026amp;R TRAK+ Wheel Spacers for the BMW M3 Type F80.\u003c\/p\u003e\u003ch3\u003eAbout the H\u0026amp;R TRAK+ Wheel Spacers\u003c\/h3\u003e\u003cp\u003eTRAK+ spacers push the wheels outward to widen the track and fill the guards. Each pair covers one axle, and the sizes are quoted per axle with the amount each side in brackets, so a 20mm spacer moves each wheel out 10mm.\u003c\/p\u003e\u003cp\u003eThey are hub centric, machined from forged aluminium, and supplied with the extended bolts sized to suit the spacer chosen. Running a different width front and rear is normal: add the front size, then add the rear size as a second item, and each pair arrives with the right bolts.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e10mm per axle, 5mm per side, part 1075726, extended bolt 14253501\u003c\/li\u003e\n\u003cli\u003e20mm per axle, 10mm per side, part 2075726, extended bolt 14254001\u003c\/li\u003e\n\u003cli\u003e24mm per axle, 12mm per side, part 2475726, extended bolt 14254001\u003c\/li\u003e\n\u003cli\u003e30mm per axle, 15mm per side, part 3075726, extended bolt 14254301\u003c\/li\u003e\n\u003cli\u003eHub centric\u003c\/li\u003e\n\u003cli\u003eMachined from forged aluminium\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair, enough for one axle\u003c\/li\u003e\n\u003cli\u003eSilver or black anodised finish\u003c\/li\u003e\n\u003cli\u003ePart number 1075726\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBMW M3 F80 Sedan, 2015 to 2018\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 x H\u0026amp;R TRAK+ wheel spacers (one axle)\u003c\/li\u003e\n\u003cli\u003eFitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eExtended wheel bolts are required. The correct length changes with the spacer thickness, so choose Included above and the right bolt comes with it.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. H\u0026amp;R warranty applies.\u003c\/p\u003e","brand":"H\u0026R Suspension","offers":[{"title":"10mm per axle (5mm per side) \/ Silver \/ Not included","offer_id":46786187067471,"sku":"1075726","price":170.0,"currency_code":"AUD","in_stock":true},{"title":"10mm per axle (5mm per side) \/ Silver \/ Included, 10 silver bolts for this axle","offer_id":46786187100239,"sku":"1075726+14253501","price":265.0,"currency_code":"AUD","in_stock":true},{"title":"10mm per axle (5mm per side) \/ Silver \/ Included, 10 black bolts for this axle","offer_id":46786187133007,"sku":"1075726+14253501-B","price":265.0,"currency_code":"AUD","in_stock":true},{"title":"10mm per axle (5mm per side) \/ Black \/ Not included","offer_id":46786187165775,"sku":"1075726-B","price":170.0,"currency_code":"AUD","in_stock":true},{"title":"10mm per axle (5mm per side) \/ Black \/ Included, 10 silver bolts for this axle","offer_id":46786187198543,"sku":"1075726-B+14253501","price":265.0,"currency_code":"AUD","in_stock":true},{"title":"10mm per axle (5mm per side) \/ Black \/ Included, 10 black bolts for this axle","offer_id":46786187231311,"sku":"1075726-B+14253501-B","price":265.0,"currency_code":"AUD","in_stock":true},{"title":"20mm per axle (10mm per side) \/ Silver \/ Not included","offer_id":46786187264079,"sku":"2075726","price":260.0,"currency_code":"AUD","in_stock":true},{"title":"20mm per axle (10mm per side) \/ Silver \/ Included, 10 silver bolts for this axle","offer_id":46786187296847,"sku":"2075726+14254001","price":355.0,"currency_code":"AUD","in_stock":true},{"title":"20mm per axle (10mm per side) \/ Silver \/ Included, 10 black bolts for this axle","offer_id":46786187329615,"sku":"2075726+14254001-B","price":355.0,"currency_code":"AUD","in_stock":true},{"title":"20mm per axle (10mm per side) \/ Black \/ Not included","offer_id":46786187362383,"sku":"2075726-B","price":260.0,"currency_code":"AUD","in_stock":true},{"title":"20mm per axle (10mm per side) \/ Black \/ Included, 10 silver bolts for this axle","offer_id":46786187395151,"sku":"2075726-B+14254001","price":355.0,"currency_code":"AUD","in_stock":true},{"title":"20mm per axle (10mm per side) \/ Black \/ Included, 10 black bolts for this axle","offer_id":46786187427919,"sku":"2075726-B+14254001-B","price":355.0,"currency_code":"AUD","in_stock":true},{"title":"24mm per axle (12mm per side) \/ Silver \/ Not included","offer_id":46786187460687,"sku":"2475726","price":285.0,"currency_code":"AUD","in_stock":true},{"title":"24mm per axle (12mm per side) \/ Silver \/ Included, 10 silver bolts for this axle","offer_id":46786187493455,"sku":"2475726+14254001","price":380.0,"currency_code":"AUD","in_stock":true},{"title":"24mm per axle (12mm per side) \/ Silver \/ Included, 10 black bolts for this axle","offer_id":46786187526223,"sku":"2475726+14254001-B","price":380.0,"currency_code":"AUD","in_stock":true},{"title":"24mm per axle (12mm per side) \/ Black \/ Not included","offer_id":46786187558991,"sku":"2475726-B","price":285.0,"currency_code":"AUD","in_stock":true},{"title":"24mm per axle (12mm per side) \/ Black \/ Included, 10 silver bolts for this axle","offer_id":46786187591759,"sku":"2475726-B+14254001","price":380.0,"currency_code":"AUD","in_stock":true},{"title":"24mm per axle (12mm per side) \/ Black \/ Included, 10 black bolts for this axle","offer_id":46786187624527,"sku":"2475726-B+14254001-B","price":380.0,"currency_code":"AUD","in_stock":true},{"title":"30mm per axle (15mm per side) \/ Silver \/ Not included","offer_id":46786187657295,"sku":"3075726","price":308.0,"currency_code":"AUD","in_stock":true},{"title":"30mm per axle (15mm per side) \/ Silver \/ Included, 10 silver bolts for this axle","offer_id":46786187690063,"sku":"3075726+14254301","price":403.0,"currency_code":"AUD","in_stock":true},{"title":"30mm per axle (15mm per side) \/ Silver \/ Included, 10 black bolts for this axle","offer_id":46786187722831,"sku":"3075726+14254301-B","price":403.0,"currency_code":"AUD","in_stock":true},{"title":"30mm per axle (15mm per side) \/ Black \/ Not included","offer_id":46786187755599,"sku":"3075726-B","price":308.0,"currency_code":"AUD","in_stock":true},{"title":"30mm per axle (15mm per side) \/ Black \/ Included, 10 silver bolts for this axle","offer_id":46786187788367,"sku":"3075726-B+14254301","price":403.0,"currency_code":"AUD","in_stock":true},{"title":"30mm per axle (15mm per side) \/ Black \/ Included, 10 black bolts for this axle","offer_id":46786187821135,"sku":"3075726-B+14254301-B","price":403.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/DR-S_08cc975c-3cdc-417e-8ce4-d66d3ecd843e.png?v=1789536727"},{"product_id":"bilstein-b6-rear-shock-absorber-for-bmw-m3-f80-2014-2019-standard","title":"Bilstein B6 Rear Shock Absorber for BMW M3 F80 2014-2019 (Standard)","description":"\u003cp\u003eBilstein B6 rear shock absorber for the BMW M3 F80 2014-2019, at standard ride height.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: rear\u003c\/li\u003e\n\u003cli\u003eSuits standard ride height\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003eNot for vehicles with Electronic Damping Control (EDC)\u003c\/li\u003e\n\u003cli\u003ePart number 24-244060\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBMW M3 F80 Sedan, 2015 to 2018\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber. Two are needed to do the rear of the vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811389919311,"sku":"24-244060","price":396.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/24-244060_cacd2ece-831b-47d5-b223-770e2eeb3192.jpg?v=1789780110"},{"product_id":"bilstein-b16-front-and-rear-coilover-kit-for-bmw-m3-f80-2014-2019-30-40mm-5-25mm","title":"Bilstein B16 Front and Rear Coilover Kit for BMW M3 F80 2014-2019 (30-40mm \/ 5-25mm)","description":"\u003cp\u003eBilstein B16 front and rear coilover kit for the BMW M3 F80 2014-2019, with 30-40mm \/ 5-25mm of adjustable lowering.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B16\u003c\/h3\u003e\u003cp\u003eThe B16 is Bilstein's coilover kit with both height adjustment and adjustable damping, so compression and rebound can be tuned to the road, the tyre and the driver rather than fixed at the factory. Kits come matched front and rear, built around the same monotube construction used across the range.\u003c\/p\u003e\u003cp\u003eWorth having if the car is driven on track, or if you want to be able to change its character after it is fitted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: front and rear\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 30-40mm \/ 5-25mm\u003c\/li\u003e\n\u003cli\u003eHeight adjustable spring perches, adjustable damping\u003c\/li\u003e\n\u003cli\u003eMatched front and rear kit\u003c\/li\u003e\n\u003cli\u003eNot for vehicles with Electronic Damping Control (EDC)\u003c\/li\u003e\n\u003cli\u003eSome wheel and tyre combinations need wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number 48-244091\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBMW M3 F80 Sedan, 2015 to 2018\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811390017615,"sku":"48-244091","price":4400.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/48-244091_0f479a84-4657-4729-9210-67cdcc7d55e6.jpg?v=1789780110"},{"product_id":"bilstein-b6-front-left-shock-absorber-for-bmw-m3-f80-2014-2019-standard","title":"Bilstein B6 Front Left Shock Absorber for BMW M3 F80 2014-2019 (Standard)","description":"\u003cp\u003eBilstein B6 front left shock absorber for the BMW M3 F80 2014-2019, at standard ride height.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: front\u003c\/li\u003e\n\u003cli\u003eSuits standard ride height\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003eNot for vehicles with Electronic Damping Control (EDC)\u003c\/li\u003e\n\u003cli\u003ePart number 35-244059\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBMW M3 F80 Sedan, 2015 to 2018\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber, for the front left of the vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811390312527,"sku":"35-244059","price":715.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/35-244059-t_8aac7084-4e03-4a02-8878-0208b99890cd.png?v=1789780111"},{"product_id":"bilstein-b6-front-right-shock-absorber-for-bmw-m3-f80-2014-2019-standard","title":"Bilstein B6 Front Right Shock Absorber for BMW M3 F80 2014-2019 (Standard)","description":"\u003cp\u003eBilstein B6 front right shock absorber for the BMW M3 F80 2014-2019, at standard ride height.\u003c\/p\u003e\u003ch3\u003eAbout the Bilstein B6\u003c\/h3\u003e\u003cp\u003eThe B6 is Bilstein's upgraded damper for standard or near standard ride height. It uses monotube, high pressure gas construction with firmer valving than the original part, which sharpens turn-in, settles body movement and resists fade when the vehicle is loaded, towing or driven hard. Spring rates and ride height are untouched, so the vehicle sits where it did before.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: front\u003c\/li\u003e\n\u003cli\u003eSuits standard ride height\u003c\/li\u003e\n\u003cli\u003eMonotube, high pressure gas, non-adjustable\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003eNot for vehicles with Electronic Damping Control (EDC)\u003c\/li\u003e\n\u003cli\u003ePart number 35-244110\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBMW M3 F80 Sedan, 2015 to 2018\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne shock absorber, for the front right of the vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Bilstein warranty applies.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":46811391492175,"sku":"35-244110","price":715.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/35-244110-t_282b1f85-a8fd-47d8-91bc-6843d0db0d52.png?v=1789780114"},{"product_id":"kw-height-adjustable-spring-kit-for-04-2014-bmw-3-series-f30-f80-253200an","title":"KW Height Adjustable Springs - BMW M2 (F87), BMW M3 (F80), BMW M4 (F82)","description":"\u003cp\u003eKW Height adjustable spring for the BMW M2 (F87), BMW M3 (F80), BMW M4 (F82).\u003c\/p\u003e\u003ch3\u003eAbout KW height adjustable springs\u003c\/h3\u003e\u003cp\u003eKW height adjustable springs lower the car on its factory dampers, with an adjustable perch so the drop can be set within a range rather than fixed at one height.\u003c\/p\u003e\u003cp\u003eThey suit a car that should sit lower without the cost or the adjustment of a full coilover.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdjustable perch, drop set within a range\u003c\/li\u003e\n\u003cli\u003eUses the factory dampers\u003c\/li\u003e\n\u003cli\u003eSuits engines: M2, M2 Competition, M2 CS, M3, M3 Competition, M3 CS, M4, M4 Competition, M4 CS\u003c\/li\u003e\n\u003cli\u003eListed by KW for: BMW M2 (F87), BMW M3 (F80), BMW M4 (F82)\u003c\/li\u003e\n\u003cli\u003eFront and rear height-adjustable (front and rear springs with height adjustment, usage only with factory dampers)\u003c\/li\u003e\n\u003cli\u003eWhen using original tires, wheel offset spacers may be required\u003c\/li\u003e\n\u003cli\u003ePart number 253200AN\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBMW M2, 2015 to 2021\u003c\/li\u003e\n\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\n\u003cli\u003eBMW M4, 2015 to 2020\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA set of height adjustable springs for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841603489871,"sku":"253200AN","price":1889.55,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0002912.jpg?v=1789944506"},{"product_id":"kw-coilover-kit-v3-for-04-2014-bmw-3-series-f30-f80-352200an","title":"KW V3 Coilover Kit - BMW M3 (F80), BMW M4 (F82)","description":"\u003cp\u003eKW V3 Coilover Kit for the BMW M3 (F80), BMW M4 (F82).\u003c\/p\u003e\u003ch3\u003eAbout the KW V3\u003c\/h3\u003e\u003cp\u003eThe KW V3 is the adjustable coilover in the road range, with rebound and compression adjusted separately. Compression controls how the suspension takes the hit, rebound controls how it comes back, and separating the two is what lets a car be set up for a particular road, load or tyre.\u003c\/p\u003e\u003cp\u003eRide height is adjusted at the threaded strut body, and the damping adjustment is made by hand with click stops so a setting can be repeated. Struts are stainless steel.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eRebound and compression adjustable separately\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eSuits engines: M3, M3 Competition, M3 CS, M4, M4 Competition, M4 CS\u003c\/li\u003e\n\u003cli\u003eListed by KW for: BMW M3 (F80), BMW M4 (F82)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eFor cars which have electronic dampers, make sure they are shut down. Specific electronical damper shut-downs are available from KW. Please check our accessories list\u003c\/li\u003e\n\u003cli\u003eDampers are adjusted by easily operating adjustment wheels. Rebound is only adjustable if the top of the piston rod is accessible. This will depend on the vehicle construction.\u003c\/li\u003e\n\u003cli\u003ePart number 352200AN\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\n\u003cli\u003eBMW M4, 2015 to 2020\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841649594447,"sku":"352200AN","price":4929.55,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0004138.jpg?v=1789944639"},{"product_id":"kw-coilover-kit-v3-for-04-2014-bmw-3-series-f30-f80-w-deactivation-for-electronic-dampers-352200ap","title":"KW V3 Coilover Kit - BMW M3 (F80), BMW M4 (F82) (EDC Deactivation Included)","description":"\u003cp\u003eKW V3 Coilover Kit for the BMW M3 (F80), BMW M4 (F82).\u003c\/p\u003e\u003ch3\u003eAbout the KW V3\u003c\/h3\u003e\u003cp\u003eThe KW V3 is the adjustable coilover in the road range, with rebound and compression adjusted separately. Compression controls how the suspension takes the hit, rebound controls how it comes back, and separating the two is what lets a car be set up for a particular road, load or tyre.\u003c\/p\u003e\u003cp\u003eRide height is adjusted at the threaded strut body, and the damping adjustment is made by hand with click stops so a setting can be repeated. Struts are stainless steel.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eRebound and compression adjustable separately\u003c\/li\u003e\n\u003cli\u003eStainless steel strut bodies\u003c\/li\u003e\n\u003cli\u003eIncludes the deactivation kit for the factory electronic dampers\u003c\/li\u003e\n\u003cli\u003eSuits engines: M3, M3 Competition, M3 CS, M4, M4 Competition, M4 CS\u003c\/li\u003e\n\u003cli\u003eListed by KW for: BMW M3 (F80), BMW M4 (F82)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eElectronic damping control has to be deactivated. Deactivation kit is included in the delivery.\u003c\/li\u003e\n\u003cli\u003eDampers are adjusted by easily operating adjustment wheels. Rebound is only adjustable if the top of the piston rod is accessible. This will depend on the vehicle construction.\u003c\/li\u003e\n\u003cli\u003ePart number 352200AP\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\n\u003cli\u003eBMW M4, 2015 to 2020\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841649561679,"sku":"352200AP","price":5395.05,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0004139.jpg?v=1789944640"},{"product_id":"kw-coilover-kit-v3-clubsport-for-04-2014-bmw-3-series-f30-f80-w-top-mounts-352208an","title":"KW V3 Clubsport Coilover Kit - BMW M3 (F80), BMW M4 (F82) (with Top Mounts)","description":"\u003cp\u003eKW Clubsport coilover for the BMW M3 (F80), BMW M4 (F82).\u003c\/p\u003e\u003ch3\u003eAbout KW Clubsport coilovers\u003c\/h3\u003e\u003cp\u003eKW Clubsport is the track focused coilover, supplied with top mounts so camber can be set at the strut rather than fought at the alignment rack. Damping is adjustable and the setup is firmer than the road range, which is the point of it.\u003c\/p\u003e\u003cp\u003eIt is road legal in Germany with TUV approval, but it is built for a car that spends time on a circuit.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eAdjustable damping\u003c\/li\u003e\n\u003cli\u003eSupplied with top mounts, camber adjustable on most applications\u003c\/li\u003e\n\u003cli\u003eSuits engines: M3, M3 Competition, M3 CS, M4, M4 Competition, M4 CS\u003c\/li\u003e\n\u003cli\u003eListed by KW for: BMW M3 (F80), BMW M4 (F82)\u003c\/li\u003e\n\u003cli\u003eClubsport coilover with top mount: only with front axle top mount available\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eFor cars which have electronic dampers, make sure they are shut down. Specific electronical damper shut-downs are available from KW. Please check our accessories list\u003c\/li\u003e\n\u003cli\u003eDampers are adjusted by easily operating adjustment wheels. Rebound is only adjustable if the top of the piston rod is accessible. This will depend on the vehicle construction.\u003c\/li\u003e\n\u003cli\u003eWhen using original tires, wheel offset spacers may be required\u003c\/li\u003e\n\u003cli\u003ePart number 352208AN\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\n\u003cli\u003eBMW M4, 2015 to 2020\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841670467663,"sku":"352208AN","price":7048.05,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0004220.jpg?v=1789944667"},{"product_id":"kw-coilover-kit-ddc-plug-and-play-for-04-2014-bmw-3-series-f30-f80-39020039","title":"KW DDC Plug and Play Coilover Kit - BMW M3 (F80), BMW M4 (F82)","description":"\u003cp\u003eKW DDC Plug \u0026amp; Play for the BMW M3 (F80), BMW M4 (F82).\u003c\/p\u003e\u003ch3\u003eAbout KW DDC Plug \u0026amp; Play\u003c\/h3\u003e\u003cp\u003eDDC Plug \u0026amp; Play replaces the factory electronic dampers and connects to the car's own system, so the modes on the dash keep working and control the KW dampers instead. Ride height is adjustable at the strut.\u003c\/p\u003e\u003cp\u003eIt suits a car that came with adaptive damping and should keep it.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable at the strut\u003c\/li\u003e\n\u003cli\u003eConnects to the factory adaptive damping controls\u003c\/li\u003e\n\u003cli\u003eSuits engines: M3, M3 Competition, M3 CS, M4, M4 Competition, M4 CS\u003c\/li\u003e\n\u003cli\u003eListed by KW for: BMW M3 (F80), BMW M4 (F82)\u003c\/li\u003e\n\u003cli\u003eOnly for vehicles which have electronic dampers\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003ePart number 39020039\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\n\u003cli\u003eBMW M4, 2015 to 2020\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841877004367,"sku":"39020039","price":7409.05,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0005085.jpg?v=1789945796"},{"product_id":"kw-coilover-kit-v4-clubsport-for-04-2014-bmw-3-series-f30-f80-w-top-mounts-397202an","title":"KW V4 Clubsport Coilover Kit - BMW M3 (F80), BMW M4 (F82) (with Top Mounts)","description":"\u003cp\u003eKW Clubsport coilover for the BMW M3 (F80), BMW M4 (F82).\u003c\/p\u003e\u003ch3\u003eAbout KW Clubsport coilovers\u003c\/h3\u003e\u003cp\u003eKW Clubsport is the track focused coilover, supplied with top mounts so camber can be set at the strut rather than fought at the alignment rack. Damping is adjustable and the setup is firmer than the road range, which is the point of it.\u003c\/p\u003e\u003cp\u003eIt is road legal in Germany with TUV approval, but it is built for a car that spends time on a circuit.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eAdjustable damping\u003c\/li\u003e\n\u003cli\u003eSupplied with top mounts, camber adjustable on most applications\u003c\/li\u003e\n\u003cli\u003eSuits engines: M3, M3 Competition, M3 CS, M4, M4 Competition, M4 CS\u003c\/li\u003e\n\u003cli\u003eListed by KW for: BMW M3 (F80), BMW M4 (F82)\u003c\/li\u003e\n\u003cli\u003eClubsport coilover with top mount: only with front axle top mount available\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eFor cars which have electronic dampers, make sure they are shut down. Specific electronical damper shut-downs are available from KW. Please check our accessories list\u003c\/li\u003e\n\u003cli\u003eDampers are adjusted by easily operating adjustment wheels. Rebound is only adjustable if the top of the piston rod is accessible. This will depend on the vehicle construction.\u003c\/li\u003e\n\u003cli\u003ePart number 397202AN\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\n\u003cli\u003eBMW M4, 2015 to 2020\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841881428047,"sku":"397202AN","price":9575.05,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0005223.jpg?v=1789945836"},{"product_id":"kw-coilover-kit-v4-for-bmw-3-series-f30-f80-w-top-mounts-3a7200an","title":"KW V4 Coilover Kit - BMW M3 (F80), BMW M4 (F82) (with Top Mounts)","description":"\u003cp\u003eKW V4 Coilover Kit for the BMW M3 (F80), BMW M4 (F82).\u003c\/p\u003e\u003ch3\u003eAbout the KW V4\u003c\/h3\u003e\u003cp\u003eThe KW V4 sits above the V3, with a wider adjustment range and a damper built for cars with more power and more grip than the road range is set up for. Compression is split into low and high speed adjustment, so the way the car handles a kerb can be set apart from the way it handles weight transfer.\u003c\/p\u003e\u003cp\u003eIt suits a fast road car that also sees track use.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eRebound and low and high speed compression adjustable\u003c\/li\u003e\n\u003cli\u003eSuits engines: M3, M3 Competition, M3 CS, M4, M4 Competition, M4 CS\u003c\/li\u003e\n\u003cli\u003eListed by KW for: BMW M3 (F80), BMW M4 (F82)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eFor cars which have electronic dampers, make sure they are shut down. Specific electronical damper shut-downs are available from KW. Please check our accessories list\u003c\/li\u003e\n\u003cli\u003eDampers are adjusted by easily operating adjustment wheels. Rebound is only adjustable if the top of the piston rod is accessible. This will depend on the vehicle construction.\u003c\/li\u003e\n\u003cli\u003ePart number 3A7200AN\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\n\u003cli\u003eBMW M4, 2015 to 2020\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841882968143,"sku":"3A7200AN","price":9480.05,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0005271.jpg?v=1789945858"},{"product_id":"kw-coilover-kit-v4-for-bmw-3-series-f30-f80-w-deactivation-for-electronic-dampers-3a7200ap","title":"KW V4 Coilover Kit - BMW M3 (F80), BMW M4 (F82) (with Top Mounts, EDC Deactivation Included)","description":"\u003cp\u003eKW V4 Coilover Kit for the BMW M3 (F80), BMW M4 (F82).\u003c\/p\u003e\u003ch3\u003eAbout the KW V4\u003c\/h3\u003e\u003cp\u003eThe KW V4 sits above the V3, with a wider adjustment range and a damper built for cars with more power and more grip than the road range is set up for. Compression is split into low and high speed adjustment, so the way the car handles a kerb can be set apart from the way it handles weight transfer.\u003c\/p\u003e\u003cp\u003eIt suits a fast road car that also sees track use.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable, front and rear\u003c\/li\u003e\n\u003cli\u003eRebound and low and high speed compression adjustable\u003c\/li\u003e\n\u003cli\u003eIncludes the deactivation kit for the factory electronic dampers\u003c\/li\u003e\n\u003cli\u003eSuits engines: M3, M3 Competition, M3 CS, M4, M4 Competition, M4 CS\u003c\/li\u003e\n\u003cli\u003eListed by KW for: BMW M3 (F80), BMW M4 (F82)\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eElectronic damping control has to be deactivated. Deactivation kit is included in the delivery.\u003c\/li\u003e\n\u003cli\u003eDampers are adjusted by easily operating adjustment wheels. Rebound is only adjustable if the top of the piston rod is accessible. This will depend on the vehicle construction.\u003c\/li\u003e\n\u003cli\u003ePart number 3A7200AP\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\n\u003cli\u003eBMW M4, 2015 to 2020\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841883033679,"sku":"3A7200AP","price":9945.55,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0005272.jpg?v=1789945860"},{"product_id":"kw-cancellation-kit-for-electronic-damping-for-bmw-68510390","title":"KW Cancellation Kit - BMW M2 (F87), BMW M3 (F80), BMW M4 (F83) and 1 more","description":"\u003cp\u003eKW Cancellation kit for the BMW M2 (F87), BMW M3 (F80), BMW M4 (F83) and others.\u003c\/p\u003e\u003ch3\u003eAbout KW cancellation kits\u003c\/h3\u003e\u003cp\u003eA cancellation kit stands in for the factory electronic damper so the car stops reporting a fault once conventional dampers are fitted. It plugs into the original wiring.\u003c\/p\u003e\u003cp\u003eIt is needed whenever a coilover replaces electronically controlled dampers, unless the coilover kit already includes one.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePlugs into the factory wiring\u003c\/li\u003e\n\u003cli\u003eStops suspension fault messages\u003c\/li\u003e\n\u003cli\u003eSuits engines: M2, M2 Competition, M2 CS, M3, M3 Competition, M3 CS, M4, M4 Competition, M4 CS\u003c\/li\u003e\n\u003cli\u003eListed by KW for: BMW M2 (F87), BMW M3 (F80), BMW M4 (F83), BMW M4 (F82)\u003c\/li\u003e\n\u003cli\u003ePart number 68510390\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBMW M2, 2015 to 2021\u003c\/li\u003e\n\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\n\u003cli\u003eBMW M4, 2015 to 2020\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne cancellation kit.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841884115023,"sku":"68510390","price":949.05,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0012357.jpg?v=1789945867"},{"product_id":"kw-clubsport-lane-ra-control-arm-for-bmw-m2-m3-m4-68510490","title":"KW Suspension Component - BMW M2 (F87), BMW M2 (G87), BMW M3 (F80) and 5 more","description":"\u003cp\u003eKW Suspension components for the BMW M2 (F87), BMW M2 (G87), BMW M3 (F80) and others.\u003c\/p\u003e\u003ch3\u003eAbout KW suspension components\u003c\/h3\u003e\u003cp\u003eKW make the individual components that finish a suspension setup: anti-sway bars, adjustable control arms, camber correction parts and the hardware that goes with them.\u003c\/p\u003e\u003cp\u003eWhat this part is and what it adjusts are listed in the specification.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuits engines: M2, M2 Competition, M2 CS, M3, M3 Competition, M3 CS, M3 COMPETITION M XDRIVE, M3 CS xDrive, M3 Competition xDrive, M4, M4 Competition, M4 CS, M4 GTS, M4 Competition M xDrive, M4 CS xDrive, M4 CSL\u003c\/li\u003e\n\u003cli\u003eListed by KW for: BMW M2 (F87), BMW M2 (G87), BMW M3 (F80), BMW M3 (G80), BMW M3 (G81), BMW M4 (F83), BMW M4 (F82), BMW M4 (G82)\u003c\/li\u003e\n\u003cli\u003ePart number 68510490\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBMW M2, 2015 to current\u003c\/li\u003e\n\u003cli\u003eBMW M3, 2015 to current\u003c\/li\u003e\n\u003cli\u003eBMW M4, 2015 to current\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne component, as described above.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841886474319,"sku":"68510490","price":2117.55,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0012515.jpg?v=1789945881"},{"product_id":"clubsport-top-mount-fa-with-camber-adjustment-19000882","title":"KW Clubsport Top Mount - BMW M2 (F87), BMW M3 (F80), BMW M4 (F82) (Front, Left, Camber Adjustment)","description":"\u003cp\u003eKW Clubsport top mount for the BMW M2 (F87), BMW M3 (F80), BMW M4 (F82).\u003c\/p\u003e\u003ch3\u003eAbout KW clubsport top mounts\u003c\/h3\u003e\u003cp\u003eKW Clubsport top mounts replace the rubber factory mount with a spherical bearing, which removes the flex that blurs steering feel. Most versions allow camber to be adjusted at the top of the strut, and some add castor.\u003c\/p\u003e\u003cp\u003eThey transmit more noise and vibration into the cabin than the factory mount, which is the trade for the precision.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSpherical bearing in place of the rubber mount\u003c\/li\u003e\n\u003cli\u003eSuits engines: M2, M2 Competition, M2 CS, M3, M3 Competition, M3 CS, M4, M4 Competition, M4 CS, M4 GTS Professional fitting is recommended.\u003c\/li\u003e\n\u003cli\u003eListed by KW for: BMW M2 (F87), BMW M3 (F80), BMW M4 (F82)\u003c\/li\u003e\n\u003cli\u003ePart number 19000882\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBMW M2, 2015 to 2021\u003c\/li\u003e\n\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\n\u003cli\u003eBMW M4, 2015 to 2020\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne top mount, as described above.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841890472015,"sku":"19000882","price":654.55,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0014520.jpg?v=1789945914"},{"product_id":"clubsport-top-mount-fa-right-with-camber-adjustment-19000883","title":"KW Clubsport Top Mount - BMW M2 (F87), BMW M3 (F80), BMW M4 (F82) (Front, Right, Camber Adjustment)","description":"\u003cp\u003eKW Clubsport top mount for the BMW M2 (F87), BMW M3 (F80), BMW M4 (F82).\u003c\/p\u003e\u003ch3\u003eAbout KW clubsport top mounts\u003c\/h3\u003e\u003cp\u003eKW Clubsport top mounts replace the rubber factory mount with a spherical bearing, which removes the flex that blurs steering feel. Most versions allow camber to be adjusted at the top of the strut, and some add castor.\u003c\/p\u003e\u003cp\u003eThey transmit more noise and vibration into the cabin than the factory mount, which is the trade for the precision.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSpherical bearing in place of the rubber mount\u003c\/li\u003e\n\u003cli\u003eSuits engines: M2, M2 Competition, M2 CS, M3, M3 Competition, M3 CS, M4, M4 Competition, M4 CS, M4 GTS Professional fitting is recommended.\u003c\/li\u003e\n\u003cli\u003eListed by KW for: BMW M2 (F87), BMW M3 (F80), BMW M4 (F82)\u003c\/li\u003e\n\u003cli\u003ePart number 19000883\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBMW M2, 2015 to 2021\u003c\/li\u003e\n\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\n\u003cli\u003eBMW M4, 2015 to 2020\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne top mount, as described above.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841892601935,"sku":"19000883","price":654.55,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0014582.jpg?v=1789945930"},{"product_id":"coilover-suspension-v3-racing-39520337","title":"KW V3 Racing Coilover Kit - BMW M2 (F87), BMW M3 (F80), BMW M4 (F82)","description":"\u003cp\u003eKW Racing coilover for the BMW M2 (F87), BMW M3 (F80), BMW M4 (F82).\u003c\/p\u003e\u003ch3\u003eAbout KW racing coilovers\u003c\/h3\u003e\u003cp\u003eKW Racing coilovers are built for circuit use, with the adjustment range and the damper construction that motorsport needs and none of the compromises made for road comfort.\u003c\/p\u003e\u003cp\u003eSetup is expected to be done for the car, the track and the tyre rather than taken out of the box.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable\u003c\/li\u003e\n\u003cli\u003eMotorsport damper construction\u003c\/li\u003e\n\u003cli\u003eSet up per car, track and tyre\u003c\/li\u003e\n\u003cli\u003eSuits engines: M2, M2 Competition, M2 CS, M3, M3 Competition, M3 CS, M4, M4 Competition, M4 CS, M4 GTS Alternative part numbers 39520338\u003c\/li\u003e\n\u003cli\u003eListed by KW for: BMW M2 (F87), BMW M3 (F80), BMW M4 (F82)\u003c\/li\u003e\n\u003cli\u003ePart number 39520337\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBMW M2, 2015 to 2021\u003c\/li\u003e\n\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\n\u003cli\u003eBMW M4, 2015 to 2020\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841895419983,"sku":"39520337","price":9822.05,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0014673.jpg?v=1789945957"},{"product_id":"kw-coilover-suspension-v4-racing-incl-top-mounts-for-bmw-2-coupe-f22-f87-3-f30-f80-4-coupe-f32-f82-39720354","title":"KW V4 Racing Coilover Kit - BMW M2 (F87), BMW M3 (F80), BMW M4 (F82) (with Top Mounts) [39720354]","description":"\u003cp\u003eKW Racing coilover for the BMW M2 (F87), BMW M3 (F80), BMW M4 (F82).\u003c\/p\u003e\u003ch3\u003eAbout KW racing coilovers\u003c\/h3\u003e\u003cp\u003eKW Racing coilovers are built for circuit use, with the adjustment range and the damper construction that motorsport needs and none of the compromises made for road comfort.\u003c\/p\u003e\u003cp\u003eSetup is expected to be done for the car, the track and the tyre rather than taken out of the box.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable\u003c\/li\u003e\n\u003cli\u003eMotorsport damper construction\u003c\/li\u003e\n\u003cli\u003eSet up per car, track and tyre\u003c\/li\u003e\n\u003cli\u003eSuits engines: M2, M2 Competition, M2 CS, M3, M3 Competition, M3 CS, M4, M4 Competition, M4 CS, M4 GTS\u003c\/li\u003e\n\u003cli\u003eListed by KW for: BMW M2 (F87), BMW M3 (F80), BMW M4 (F82)\u003c\/li\u003e\n\u003cli\u003eClubsport coilover with top mount: only with front axle top mount available\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eDampers are adjusted by easily operating adjustment wheels. Rebound is only adjustable if the top of the piston rod is accessible. This will depend on the vehicle construction.\u003c\/li\u003e\n\u003cli\u003ePart number 39720354\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBMW M2, 2015 to 2021\u003c\/li\u003e\n\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\n\u003cli\u003eBMW M4, 2015 to 2020\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841900367951,"sku":"39720354","price":14125.55,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0021326.jpg?v=1789946009"},{"product_id":"kw-coilover-suspension-v4-racing-incl-top-mounts-for-bmw-f22-f87-f30-f80-f32-f82-39720355","title":"KW V4 Racing Coilover Kit - BMW M2 (F87), BMW M3 (F80), BMW M4 (F82) (with Top Mounts) [39720355]","description":"\u003cp\u003eKW Racing coilover for the BMW M2 (F87), BMW M3 (F80), BMW M4 (F82).\u003c\/p\u003e\u003ch3\u003eAbout KW racing coilovers\u003c\/h3\u003e\u003cp\u003eKW Racing coilovers are built for circuit use, with the adjustment range and the damper construction that motorsport needs and none of the compromises made for road comfort.\u003c\/p\u003e\u003cp\u003eSetup is expected to be done for the car, the track and the tyre rather than taken out of the box.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable\u003c\/li\u003e\n\u003cli\u003eMotorsport damper construction\u003c\/li\u003e\n\u003cli\u003eSet up per car, track and tyre\u003c\/li\u003e\n\u003cli\u003eSuits engines: M2, M2 Competition, M2 CS, M3, M3 Competition, M3 CS, M4, M4 Competition, M4 CS, M4 GTS\u003c\/li\u003e\n\u003cli\u003eListed by KW for: BMW M2 (F87), BMW M3 (F80), BMW M4 (F82)\u003c\/li\u003e\n\u003cli\u003eClubsport coilover with top mount: only with front axle top mount available\u003c\/li\u003e\n\u003cli\u003eHeight adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)\u003c\/li\u003e\n\u003cli\u003eDampers are adjusted by easily operating adjustment wheels. Rebound is only adjustable if the top of the piston rod is accessible. This will depend on the vehicle construction.\u003c\/li\u003e\n\u003cli\u003ePart number 39720355\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBMW M2, 2015 to 2021\u003c\/li\u003e\n\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\n\u003cli\u003eBMW M4, 2015 to 2020\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841900400719,"sku":"39720355","price":14125.55,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0021327.jpg?v=1789946010"},{"product_id":"kw-coilover-suspension-v4-racing-for-bmw-2er-coupe-f22-f87-3er-f30-f80-4er-coupe-f32-f82-39720338","title":"KW V4 Racing Coilover Kit - BMW M2 (F87), BMW M3 (F80), BMW M4 (F82) [39720338]","description":"\u003cp\u003eKW Racing coilover for the BMW M2 (F87), BMW M3 (F80), BMW M4 (F82).\u003c\/p\u003e\u003ch3\u003eAbout KW racing coilovers\u003c\/h3\u003e\u003cp\u003eKW Racing coilovers are built for circuit use, with the adjustment range and the damper construction that motorsport needs and none of the compromises made for road comfort.\u003c\/p\u003e\u003cp\u003eSetup is expected to be done for the car, the track and the tyre rather than taken out of the box.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable\u003c\/li\u003e\n\u003cli\u003eMotorsport damper construction\u003c\/li\u003e\n\u003cli\u003eSet up per car, track and tyre\u003c\/li\u003e\n\u003cli\u003eSuits engines: M2, M2 Competition, M2 CS, M3, M3 Competition, M3 CS, M4, M4 Competition, M4 CS, M4 GTS\u003c\/li\u003e\n\u003cli\u003eListed by KW for: BMW M2 (F87), BMW M3 (F80), BMW M4 (F82)\u003c\/li\u003e\n\u003cli\u003ePart number 39720338\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBMW M2, 2015 to 2021\u003c\/li\u003e\n\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\n\u003cli\u003eBMW M4, 2015 to 2020\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841901842511,"sku":"39720338","price":14125.55,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0021369.jpg?v=1789946030"},{"product_id":"kw-coilover-suspension-v4-racing-for-bmw-2er-coupe-f22-f87-3er-f30-f80-4er-coupe-f32-f82-39720339","title":"KW V4 Racing Coilover Kit - BMW M2 (F87), BMW M3 (F80), BMW M4 (F82) [39720339]","description":"\u003cp\u003eKW Racing coilover for the BMW M2 (F87), BMW M3 (F80), BMW M4 (F82).\u003c\/p\u003e\u003ch3\u003eAbout KW racing coilovers\u003c\/h3\u003e\u003cp\u003eKW Racing coilovers are built for circuit use, with the adjustment range and the damper construction that motorsport needs and none of the compromises made for road comfort.\u003c\/p\u003e\u003cp\u003eSetup is expected to be done for the car, the track and the tyre rather than taken out of the box.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable\u003c\/li\u003e\n\u003cli\u003eMotorsport damper construction\u003c\/li\u003e\n\u003cli\u003eSet up per car, track and tyre\u003c\/li\u003e\n\u003cli\u003eSuits engines: M2, M2 Competition, M2 CS, M3, M3 Competition, M3 CS, M4, M4 Competition, M4 CS, M4 GTS\u003c\/li\u003e\n\u003cli\u003eListed by KW for: BMW M2 (F87), BMW M3 (F80), BMW M4 (F82)\u003c\/li\u003e\n\u003cli\u003ePart number 39720339\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBMW M2, 2015 to 2021\u003c\/li\u003e\n\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\n\u003cli\u003eBMW M4, 2015 to 2020\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eA complete front and rear kit for one vehicle.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. KW warranty applies.\u003c\/p\u003e","brand":"KW Suspension","offers":[{"title":"Default Title","offer_id":46841901940815,"sku":"39720339","price":14125.55,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/KWS-0021370.jpg?v=1789946033"},{"product_id":"eventuri-f8x-m3-m4-m2c-and-m2cs-s55-black-carbon-engine-cover-eve-f8xm-cf-eng","title":"Eventuri F8X M3, M4, M2C \u0026 M2CS (Black Carbon, S55 Engine Cover)","description":"\u003cp\u003eEventuri F8X M3, M4, M2C \u0026amp; M2CS, black carbon, s55 engine cover.\u003c\/p\u003e\u003ch3\u003eAbout Eventuri engine covers\u003c\/h3\u003e\u003cp\u003eAn Eventuri carbon engine cover replaces the moulded plastic cover with pre-preg carbon fibre, finished to match their intake systems so the bay reads as one piece of work rather than a part bolted onto a standard engine.\u003c\/p\u003e\u003cp\u003eWe have produced the BMW F8X M3\/M4 engine cover in 100% prepreg carbon fibre. Available in black carbon fibre and also in red, blue and yellow carbon\/kevlar hybrid material.\u003c\/p\u003e\u003cp\u003eThe Eventuri F8X M3\/M4 carbon fibre engine cover is the perfect finishing touch to our intake system for this platform. The quality of our carbon weave and finish is second to none and installation is a matter of minutes.\u003c\/p\u003e\u003cp\u003eAvailable in black carbon fibre and also in a selective range of colours using a carbon\/kevlar hybrid construction.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFinish and options: black carbon, s55 engine cover\u003c\/li\u003e\n\u003cli\u003ePre-preg carbon fibre\u003c\/li\u003e\n\u003cli\u003eAlso available as EVE-F8XM-KV-ENG: BMW F8X M3\/M4 Kevlar Engine Cover\u003c\/li\u003e\n\u003cli\u003eListed by Eventuri for: BMW M3 (F80) Sedan Competition 2016-2018; BMW M3 (F80) Sedan CS 2018-2018; BMW M3 (F80) Sedan M3 2015-2018; BMW M4 (F83) Convertible Competition 2017-2020; BMW M4 (F83) Convertible M4 2015-2020; BMW M4 (F82) Coupe Competition 2016-2020; BMW M4 (F82) Coupe CS 2017-2019; BMW M4 (F82) Coupe M4 2015-2020; BMW M2 (F87) Coupe CS 2020-2021\u003c\/li\u003e\n\u003cli\u003ePart number EVE-F8XM-CF-ENG\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBMW M2, 2020 to 2021\u003c\/li\u003e\n\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\n\u003cli\u003eBMW M4, 2015 to 2020\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne f8x m3, m4, m2c \u0026amp; m2cs.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Eventuri warranty applies.\u003c\/p\u003e","brand":"Eventuri","offers":[{"title":"Default Title","offer_id":46846346920015,"sku":"EVE-F8XM-CF-ENG","price":1669.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/EVE-0008246.jpg?v=1789958541"},{"product_id":"eventuri-bmw-f8x-m3-m4-v2-full-black-carbon-intake-with-sealed-carbon-ducts-eve-f8xmv2-cf-int","title":"Eventuri Intake with Sealed Ducts - BMW F8X M3\/M4 V2 Full (Black Carbon)","description":"\u003cp\u003eEventuri Intake with Sealed Ducts for the BMW F8X M3\/M4 V2 Full, black carbon.\u003c\/p\u003e\u003ch3\u003eAbout Eventuri ducts\u003c\/h3\u003e\u003cp\u003eEventuri ducts carry air from the opening in the bodywork to the intake housing, in carbon rather than moulded plastic, shaped to keep the airflow attached rather than tumbling.\u003c\/p\u003e\u003cp\u003eThe F8X M3\/M4 intake system is one of our most ambitious intake systems to date. Now in the updated V2 design, it features sealed filter housings to maintain a more steady IAT, even while stationary. The new ducts which seal the housings, coupled with our scoops ensures unrestricted airflow whilst maintaining low IATs through cold air saturation. Every detail was taken into account to ensure that we created a flagship intake to set a benchmark for this platform. From the scoops to the ducts to the intake tubes - we developed a \"complete solution\" to ensure a smooth inlet track with cold air saturation. With a carbon weave to match the OEM M Performance carbon - this truly is a new benchmark.\u003c\/p\u003e\u003cp\u003eThe Eventuri Difference\u003c\/p\u003e\u003cp\u003eThe F8X M3\/M4 Eventuri system uses our Patent Pending Carbon fibre Housing which provides an aerodynamically efficient airflow path from the filter to the MAF tube. Not just another cone filter with a heat shield but a unique design which invokes the Venturi affect.\u003c\/p\u003e\u003cp\u003eBelow is a dyno graph showing the comparison between the Eventuri and the stock airboxes on a standard F80 M4. As you can see, power and torque are increased through a large portion of the rpm range not just at the peak. This translates on the road to increased part throttle and full throttle response with the car pulling much more eagerly to the redline. The testing was done on the same day back-to-back and temperatures were monitored to ensure consistency. Since dyno results vary between consecutive runs, this graph shows the highest power figure achieved with the stock setup vs the highest figure with the Eventuri.\u003c\/p\u003e\u003cp\u003eSince the F80 M4 is sensitive to heat soak, dyno figures can vary between runs - we could have shown the highest figure achieved with the Eventuri VS the lowest achieved with the stock setup, however this would not be a fair comparison. Just to illustrate the variation, here is the graph showing highest Eventuri VS lowest stock which was recorded on the day showing a gain of over 31hp!\u003c\/p\u003e\u003cp\u003eThe Eventuri F8X M3\/M4 intake system consists of a number of components engineered to perform a specific purpose and fabricated to the highest of standards. Here are the details for each component and the design ethos behind them:\u003c\/p\u003e\u003cp\u003eThe filter housings comprise of the high flow filters, aluminium cowls, V-Band clamp, laser cut brackets and the Patented carbon pods themselves. The carbon pods shroud the reverse mounted filter and smoothly shape the airflow down to the intake tubes. This geometry invokes the Venturi effect where the airflow accelerates whilst maintaining laminar conditions. It can be thought of as a large velocity stack - below is a diagram to show the comparison between our patented design and a regular intake system. Our bespoke filters aid the airflow moving through the housings and allow for an even velocity profile as the airflow exits the housings. Further details can be read in the Technology and Filters pages.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCarbon Sealing Ducts\u003c\/strong\u003e The filter housings are positioned with the openings sealed against the carbon ducts. These ducts have been designed to fit over the stock cold air ducting channels and direct ambient air into the filters. These ducts seal the openings of the filter housings and prevent heated air from entering the filters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCarbon Intake Tubes\u003c\/strong\u003e Our intake tubes are again crafted from 100% prepreg carbon fibre. Each tube has an integrated MAF sensor mount which is CNC machined from aluminium. The shorter left side tube smoothly transitions from the carbon housing down to the turbo inlet tube. The longer right side intake tube has to clear the fan shroud and strut brace. To do so we employed the same principle as the stock tube in changing the cross section from a circle at the turbo inlet tube to an oval for clearance over the shroud, then back to a circle at the filter housing end. We ensured these transitions were gradual so as not to disrupt airflow, furthermore we maintained the same cross sectional area in order to keep the velocity through the tube constant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCarbon Air Scoops\u003c\/strong\u003e The final components in this system are the front scoops - essential to direct ambient air to the ducts and then to the filters.\u003c\/p\u003e\u003cp\u003eThe scoops were designed for maximum efficiency in directing the incoming air to the stock duct openings. Many aftermarket scoops have a large flat area almost perpendicular to the oncoming air - not great for channeling it into the ducts as the airflow just \"hits\" this flat portion and creates turbulence.\u003c\/p\u003e\u003cp\u003eThe Eventuri Scoops have been designed to sit directly behind the front grills to capture as much air as possible and with a continuous curve to the duct opening to ensure this airflow is efficiently channeled. CAD images to illustrate the shape:\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFinish and options: black carbon\u003c\/li\u003e\n\u003cli\u003ePre-preg carbon fibre\u003c\/li\u003e\n\u003cli\u003eAlso available as EVE-F8XMV2-KV-INT: BMW F8X M3\/M4 V2 Full Kevlar intake with SEALED Kevlar ducts\u003c\/li\u003e\n\u003cli\u003eListed by Eventuri for: BMW M3 (F80) Sedan Competition 2016-2018; BMW M3 (F80) Sedan CS 2018-2018; BMW M3 (F80) Sedan M3 2015-2018; BMW M4 (F83) Convertible Competition 2017-2020; BMW M4 (F83) Convertible M4 2015-2020; BMW M4 (F82) Coupe Competition 2016-2020; BMW M4 (F82) Coupe CS 2017-2019; BMW M4 (F82) Coupe M4 2015-2020\u003c\/li\u003e\n\u003cli\u003ePart number EVE-F8XMV2-CF-INT\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\n\u003cli\u003eBMW M4, 2015 to 2020\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 Carbon Fiber Venturi housings\u003c\/li\u003e\n\u003cli\u003e2 High Flow Gen 2 Filters\u003c\/li\u003e\n\u003cli\u003e2 Aluminium Cowls for smooth airflow entry\u003c\/li\u003e\n\u003cli\u003eLeft Side Carbon Tube with integrated MAF sensor mount\u003c\/li\u003e\n\u003cli\u003eRight Side Carbon Tube with integrated MAF sensor mount\u003c\/li\u003e\n\u003cli\u003e2 Carbon Fiber Sealed Intake Ducts\u003c\/li\u003e\n\u003cli\u003e2 Carbon Fiber Front Scoops\u003c\/li\u003e\n\u003cli\u003eLaser Cut Stainless Steel Brackets\u003c\/li\u003e\n\u003cli\u003eHigh quality Silicon couplers with BMW specification hose clamps\u003c\/li\u003e\n\u003cli\u003eCARBON FILTER HOUSINGS\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Eventuri warranty applies.\u003c\/p\u003e","brand":"Eventuri","offers":[{"title":"Default Title","offer_id":46846346985551,"sku":"EVE-F8XMV2-CF-INT","price":5289.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/EVE-0008249.jpg?v=1789958542"},{"product_id":"eventuri-bmw-f8x-m3-m4-panel-filter-pair-eve-f8xm-pf","title":"Eventuri Filter Pair - BMW F8X M3\/M4 Panel","description":"\u003cp\u003eEventuri Filter Pair for the BMW F8X M3\/M4 Panel.\u003c\/p\u003e\u003ch3\u003eAbout Eventuri filters\u003c\/h3\u003e\u003cp\u003eEventuri's filters are made to their own design rather than bought in, because the filter sits inside their housing and its shape decides how the air arrives at the tube. They are a direct replacement for the filter supplied with an Eventuri intake.\u003c\/p\u003e\u003cp\u003eBespoke Filter Design\u003c\/p\u003e\u003cp\u003eWe are proud to announce our bespoke filter cones for 2018. This filter is a custom design which was developed to provide optimum airflow through our Eventuri housings where the filter is reverse mounted. It is a direct replacement for all of our intakes which use Eventuri carbon housings and will be fitted to all new intakes from 2018.\u003c\/p\u003e\u003cp\u003eFiltration and Construction\u003c\/p\u003e\u003cp\u003eUnlike many other intake companies who use a generic filter, we have carried out extensive R\u0026amp;D and invested significant funds into our own unique filter design, so that it is optimised in our Patent Pending reverse mounted configuration. The filtration medium is constructed from non-woven mesh and is ISO 5011 tested which conforms to the same filtration standard as OEM filters. The mesh is double layered and is dry which means that it will not damage MAF sensors with oil. Our filters feature 2 flow directing cones which have been carefully modelled to direct airflow as follows:\u003c\/p\u003e\u003cp\u003eInternal Cone – designed to help direct incoming airflow through the filter and to create an even velocity profile across the length of the filtration material. This cone effectively helps airflow disperse across the filter without turbulence.\u003c\/p\u003e\u003cp\u003eExternal Cone – CNC machined, with a very unique profile, which was extensively optimised to help pull the airflow down to the center and transition smoothly into the downstream tubing. This cone creates a controlled region of turbulence around the tip which increases the convergence speed of the air, so that the connecting tubing has a higher velocity profile of airflow leading to the engine.\u003c\/p\u003e\u003cp\u003eAirflow\u003c\/p\u003e\u003cp\u003eThe resulting flow through the filter and also smooth at the exit of the intake, to the connecting tube is smooth with a high velocity profile. In real terms, this means that the engine is able to draw air very efficiently, and the driver will be able to notice a sharper throttle response, as well as the power and torque improvements. Where the engine has a turbo(s) it will be able to achieve peak boost earlier as it will be working with less resistance. Tests have shown that our systems reduce the waste gate duty cycle by a significant percentage over the OEM system.\u003c\/p\u003e\u003cp\u003eThe following diagrams are CFD simulations showing velocity streamlines through our system – with the new filter and the original filter.\u003c\/p\u003e\u003cp\u003eResulting Improvements\u003c\/p\u003e\u003cp\u003eThrough Dyno testing the Eventuri intakes back-to-back with the original filters vs the upgraded filters, we have found an additional power and torque gain. This validates our theoretical modelling and proves that the upgraded filters really have a significant impact on the airflow through the intake. The power gains over and above the original filters vary between vehicles, but here are some of the results we have measured so far. Please note – these graphs show the Eventuri intake with original filter vs upgraded filters. Not against the stock airboxes – which will now be an even larger gain!\u003c\/p\u003e\u003cp\u003eAesthetics\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect replacement for the filter supplied with an Eventuri intake\u003c\/li\u003e\n\u003cli\u003eListed by Eventuri for: BMW M3 (F80) Sedan Competition 2016-2018; BMW M3 (F80) Sedan CS 2018-2018; BMW M3 (F80) Sedan M3 2015-2018; BMW M4 (F83) Convertible Competition 2017-2020; BMW M4 (F83) Convertible M4 2015-2020; BMW M4 (F82) Coupe Competition 2016-2020; BMW M4 (F82) Coupe CS 2017-2019; BMW M4 (F82) Coupe M4 2015-2020\u003c\/li\u003e\n\u003cli\u003ePart number EVE-F8XM-PF\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\n\u003cli\u003eBMW M4, 2015 to 2020\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne filter pair.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Eventuri warranty applies.\u003c\/p\u003e","brand":"Eventuri","offers":[{"title":"Default Title","offer_id":46846347083855,"sku":"EVE-F8XM-PF","price":169.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/EVE-0008248.jpg?v=1789958544"},{"product_id":"eventuri-bmw-f8x-m3-m4-black-carbon-seat-back-covers-eve-f8xm-cf-sbc","title":"Eventuri Carbon Accessory - BMW F8X M3\/M4 Seat Back Covers (Black Carbon)","description":"\u003cp\u003eEventuri Carbon Accessory for the BMW F8X M3\/M4 Seat Back Covers, black carbon.\u003c\/p\u003e\u003ch3\u003eAbout this part\u003c\/h3\u003e\u003cp\u003eEventuri make this part in the same pre-preg carbon as their intake systems, finished to match.\u003c\/p\u003e\u003cp\u003eEventuri BMW F8X M3\/M4 Black Carbon Seat Back Covers\u003c\/p\u003e\u003cp\u003eAn Eventuri carbon part made for this car\u003c\/p\u003e\u003cp\u003eEventuri carbon accessory in carbon fibre, made for this car.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFinish and options: black carbon\u003c\/li\u003e\n\u003cli\u003ePre-preg carbon fibre\u003c\/li\u003e\n\u003cli\u003eHand laid carbon fibre\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on fitment\u003c\/li\u003e\n\u003cli\u003eEventuri patented design\u003c\/li\u003e\n\u003cli\u003eListed by Eventuri for: BMW M3 (F80) Sedan Competition 2016-2018; BMW M3 (F80) Sedan CS 2018-2018; BMW M3 (F80) Sedan M3 2015-2018; BMW M4 (F83) Convertible Competition 2017-2020; BMW M4 (F83) Convertible M4 2015-2020; BMW M4 (F82) Coupe Competition 2016-2020; BMW M4 (F82) Coupe CS 2017-2019; BMW M4 (F82) Coupe M4 2015-2020\u003c\/li\u003e\n\u003cli\u003ePart number EVE-F8XM-CF-SBC\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\n\u003cli\u003eBMW M4, 2015 to 2020\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne carbon accessory.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Eventuri warranty applies.\u003c\/p\u003e","brand":"Eventuri","offers":[{"title":"Default Title","offer_id":46846347018319,"sku":"EVE-F8XM-CF-SBC","price":2529.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/EVE-0008247.jpg?v=1789958544"},{"product_id":"akrapovic-rear-carbon-fibre-diffuser-gloss-for-m3-m4-f8x-di-bm-ca-4-g","title":"Akrapovic Rear Carbon Fibre Diffuser - Gloss - BMW M3, M4 (F80, F82, F83)","description":"\u003cp\u003eAkrapovic Rear Carbon Fibre Diffuser for the Gloss - BMW M3, M4 (F80, F82, F83).\u003c\/p\u003e\u003ch3\u003eAbout Akrapovič carbon parts\u003c\/h3\u003e\u003cp\u003eAkrapovič carbon parts are made from the same pre-preg carbon used across their range, finished in matte or gloss to match the system and the car. This is bodywork rather than exhaust, made to the same standard.\u003c\/p\u003e\u003cp\u003eBeautifully crafted hand-laid high-quality carbon fibre diffusers are perfectly styled to enrich the Akrapovic tailpipes and the rear of the car. The sporty and aggressive design adds an extra dimension to the whole package and shows the exhaust system off to its best. Available in high-gloss or matte finish.\u003c\/p\u003e\u003cp\u003eDiffuser also fits to M3\/M4 CS (Sport Club) and GTS version.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eListed by Akrapovič for: BMW M3 (F80) Sedan M3 2015-2018; BMW - M3 (F80) (2014 - 2018)BMW - M4 (F82, F83) (2014 - 2020)BMW - M4 (F82, F83) - OPF\/GPF (2018 - 2020)\u003c\/li\u003e\n\u003cli\u003ePart number DI-BM\/CA\/4\/G\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne rear carbon fibre diffuser, as described above.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":46849038843983,"sku":"DI-BM\/CA\/4\/G","price":3289.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/AKR-0008087.png?v=1789965831"},{"product_id":"akrapovic-rear-carbon-fibre-diffuser-matte-for-m3-m4-f8x-di-bm-ca-1","title":"Akrapovic Rear Carbon Fibre Diffuser - Matte - BMW M3, M4 (F80, F82, F83)","description":"\u003cp\u003eAkrapovic Rear Carbon Fibre Diffuser for the Matte - BMW M3, M4 (F80, F82, F83).\u003c\/p\u003e\u003ch3\u003eAbout Akrapovič carbon parts\u003c\/h3\u003e\u003cp\u003eAkrapovič carbon parts are made from the same pre-preg carbon used across their range, finished in matte or gloss to match the system and the car. This is bodywork rather than exhaust, made to the same standard.\u003c\/p\u003e\u003cp\u003eThe Akrapovic Evolution and Slip-On line exhaust systems can be further enhanced with an optional hand-crafted carbon fibre rear diffuser. Developed by Akrapovic’s Design Department, this stunning diffuser, crafted from materials developed through Akrapovic’s racing involvement, is designed to perfectly fit the lines of the unique tailpipes of the Slip-On or Evolution systems, as well as complement the sleek and sporty shape of the BMW.\u003c\/p\u003e\u003cp\u003eWhen mounting Akrapovic rear carbon fiber diffuser BMW comfort access system will not work.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWeight: 0.4 kg standard, 0.3 kg with Akrapovič, 0.1 kg saved\u003c\/li\u003e\n\u003cli\u003eWeight saving: 25.0%\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 30.0 minutes\u003c\/li\u003e\n\u003cli\u003eListed by Akrapovič for: BMW M3 (F80) Sedan M3 2015-2018; BMW - M3 (F80) (2014 - 2018)BMW - M4 (F82, F83) (2014 - 2020)BMW - M4 (F82, F83) - OPF\/GPF (2018 - 2020)\u003c\/li\u003e\n\u003cli\u003ePart number DI-BM\/CA\/1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne rear carbon fibre diffuser, as described above.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":46849038942287,"sku":"DI-BM\/CA\/1","price":2459.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/AKR-0008083.png?v=1789965830"},{"product_id":"akrapovic-slip-on-line-titanium-for-bmw-m3-m4-f80-f82-f83-m-bm-t-8h","title":"Akrapovic Slip-On Line (Titanium) - BMW M3, M4 (F80, F82, F83)","description":"\u003cp\u003eAkrapovic Slip-On Line (Titanium) for the BMW M3, M4 (F80, F82, F83).\u003c\/p\u003e\u003ch3\u003eAbout the Slip-On Line\u003c\/h3\u003e\u003cp\u003eA Slip-On Line replaces the rear section of the factory system, so it fits without touching the catalysts or the pipework ahead of them. It is the straightforward way to get the Akrapovič sound and the weight saving without changing the car's emissions equipment.\u003c\/p\u003e\u003cp\u003eMost Slip-On systems carry ECE type approval, which matters if the car has to stay road legal. Fitting an optional link pipe usually voids that approval, and the product says so where it applies.\u003c\/p\u003e\u003cp\u003eThe latest addition to the BMW M series is the awe-inspiring M3\/M4, an exquisite high-performance car that can be made even better by adding an Akrapovic Slip-On exhaust system. Made from titanium—with some parts cast in Akrapovic’s own foundry—it has bigger pipes than the stock exhaust, yielding lower back pressure and more power, especially at lower RPMs. This system is a completely new design, and it will reduce overall vehicle weight and deliver extra power and a sporty sound, which has been tailored to highlight lower frequencies and increase the listening enjoyment. Increases in both power and torque add to the sensory experience, combined with improved agility. The look of the Slip-On system can also be further enhanced by adding titanium or carbon- tailpipes and the stunning carbon- rear diffuser.\u003c\/p\u003e\u003cp\u003eAn optional Akrapovic Sound Kit is available to control the different sound settings.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePower: 327.7 kW at 6,250 rpm standard, 331.5 kW at 6,600 rpm with Akrapovič, up to + 5.4 kW at 4,400 rpm\u003c\/li\u003e\n\u003cli\u003eTorque: 583.1 Nm at 3,900 rpm standard, 584.6 Nm at 4,000 rpm with Akrapovič, up to + 17.4 Nm at 2,350 rpm\u003c\/li\u003e\n\u003cli\u003eWeight: 20.0 kg standard, 17.0 kg with Akrapovič, 3.0 kg saved\u003c\/li\u003e\n\u003cli\u003eWeight saving: 15.0%\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 150 minutes\u003c\/li\u003e\n\u003cli\u003eNote: To fit this part you also need: Carbon Tail Pipe Set or Titanium Tail Pipe Set.Buy it as a complete kit: Akrapovic Exhaust System - BMW M3, M4 (F80, F82, F83).\u003c\/li\u003e\n\u003cli\u003eNote: Exhaust system also fits to M3\/M4 CS (Sport Club) version.\u003c\/li\u003e\n\u003cli\u003eListed by Akrapovič for: BMW M3 (F80) Sedan M3 2015-2018; BMW - M3 (F80) (2014 - 2018)BMW - M4 (F82, F83) (2014 - 2020)\u003c\/li\u003e\n\u003cli\u003ePart number M-BM\/T\/8H\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne slip-on line (titanium), as described above.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":46849038975055,"sku":"M-BM\/T\/8H","price":8679.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/360_F_504289605_zehJiK0tCuZLP2MdfFBpcJdOVxKLnXg1_eb27cc96-c6e2-4603-badd-01d53dd74004.jpg?v=1789965830"},{"product_id":"akrapovic-link-pipe-set-titanium-for-m3-f80-and-m4-f82-e-bm-t-3","title":"Akrapovic Link Pipe Set (Titanium) - BMW M3, M4 (F80, F82, F83)","description":"\u003cp\u003eAkrapovic Link Pipe Set (Titanium) for the BMW M3, M4 (F80, F82, F83).\u003c\/p\u003e\u003ch3\u003eAbout Akrapovič link pipes\u003c\/h3\u003e\u003cp\u003eA link pipe replaces the section between the factory catalysts and the rear system. On most applications it is an optional upgrade to a Slip-On Line, developed and tested with it, and it changes both the flow and the sound.\u003c\/p\u003e\u003cp\u003eFitting a link pipe usually means the ECU has to be remapped, and it can void the type approval the Slip-On carries on its own. The product states which applies.\u003c\/p\u003e\u003cp\u003eThe Evolution link pipe set upgrades the Slip-On system to the Evolution system, which consists of a single-central muffler with valves and bigger Evolution link pipe tubes with a middle muffler, all designed to make the performance and workmanship of the complete system as perfect as it looks. With no second set of cats (unlike the stock system), the whole system is designed to give the smoothest flow—and the power and torque gains of the BMW with the combination of the Slip-On Line system and Evolution link pipe set are absolutely guaranteed. Crafted entirely from titanium, the complete system has a unique sound to complement its substantial increase over a very wide rpm range. In-depth engineering has produced a sound distinctly different from the stock system, giving a deep and sporty sound with no unwanted overtones or drone, and also a significant change to the sound with the valves in the open or closed positions. The complete system needs no re-programming of the ECU because it doesn’t trigger any warning lights. With tailpipes in titanium or carbon, and a handcrafted rear diffuser, all available as optional extras, the BMW with the Slip-On Line and Evolution link pipe set is as beautiful as it is powerful.\u003c\/p\u003e\u003cp\u003eExhaust system also fits to M3\/M4 CS (Sport Club) and GTS version.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePower: 327.7 kW at 6,250 rpm standard, 333.1 kW at 6,600 rpm with Akrapovič, up to + 7.5 kW at 5,200 rpm\u003c\/li\u003e\n\u003cli\u003eTorque: 583.1 Nm at 3,900 rpm standard, 589.2 Nm at 3,900 rpm with Akrapovič, up to + 16.0 Nm at 2,450 rpm\u003c\/li\u003e\n\u003cli\u003eWeight: 12.1 kg standard, 8.0 kg with Akrapovič, 4.1 kg saved\u003c\/li\u003e\n\u003cli\u003eWeight saving: 33.9%\u003c\/li\u003e\n\u003cli\u003eSound level: 94 dB at 3,750 rpm standard, 95.6 dB at 3,750 rpm with Akrapovič\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 220 minutes\u003c\/li\u003e\n\u003cli\u003eListed by Akrapovič for: BMW M3 (F80) Sedan M3 2015-2018; BMW - M3 (F80) (2014 - 2018)BMW - M4 (F82, F83) (2014 - 2020)\u003c\/li\u003e\n\u003cli\u003ePart number E-BM\/T\/3\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne link pipe set (titanium), as described above.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eThis product does not meet emission compliance requirements for street or highway use.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":46849039794255,"sku":"E-BM\/T\/3","price":5229.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/AKR-0008144.png?v=1789965832"},{"product_id":"akrapovic-downpipe-ss-for-m2-m3-m4-f8x-dp-bm-ss-3","title":"Akrapovic Downpipe (SS) - BMW M4, M2 Competition, M2 CS, M3 (F82, F83, F87N, F80)","description":"\u003cp\u003eAkrapovic Downpipe (SS) for the BMW M4, M2 Competition, M2 CS, M3 (F82, F83, F87N, F80).\u003c\/p\u003e\u003ch3\u003eAbout Akrapovič downpipes\u003c\/h3\u003e\u003cp\u003eA downpipe is the first section after the turbo, and it is where most of the restriction in a factory system sits. Replacing it frees flow where it counts most, and on some applications it carries a sport catalyst rather than deleting it.\u003c\/p\u003e\u003cp\u003eRemapping is normally required. Whether this part keeps a catalyst is stated in the title and the specification.\u003c\/p\u003e\u003cp\u003eDownpipe (SS) was tested and developed together with Evolution Line (Titanium) system.\u003c\/p\u003e\u003cp\u003eFor the ultimate in weight reduction, tuning potential, and racing sound, Akrapovic offers stainless steel, cat-less downpipes to make the BMW an even more powerful machine. This setup is intended for dedicated track-day cars and enthusiasts, and it will also add to the overall experience of what’s already a stunning performance car for any discerning driver. Delivering great sound, without creating unwanted cabin noise, these beautifully-crafted downpipes offer an upgrade to Akrapovic’s Evolution exhaust system.\u003c\/p\u003e\u003cp\u003eWhen installing Akrapovic aftermarket optional down pipes , which are developed for use on closed tracks only, remapping the ECU is mandatory, in order to prevent potential »check engine light« warning signals.\u003c\/p\u003e\u003cp\u003eDownpipes also fit to M3\/M4 CS (Sport Club) and GTS version.\u003c\/p\u003e\u003cp\u003eBMW - M4 (F82, F83) - OPF\/GPF (2018 - 2020)BMW - M2 Competition (F87N) (2018 - 2020)BMW - M2 Competition (F87N) - OPF\/GPF (2018 - 2020)BMW - M2 CS (F87N) (2020 - 2021)BMW - M2 CS (F87N) - OPF\/GPF (2020 - 2021)BMW - M3 (F80) (2014 - 2018)BMW - M4 (F82, F83) (2014 - 2020)\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eListed by Akrapovič for: BMW M2 (F87) Coupe CS 2020-2021BMW M2 (F87) Coupe Competition 2018-2021BMW M3 (F80) Sedan M3 2015-2018\u003c\/li\u003e\n\u003cli\u003ePart number DP-BM\/SS\/3\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBMW M2, 2018 to 2021\u003c\/li\u003e\n\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne downpipe (ss), as described above.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eThis product does not meet emission compliance requirements for street or highway use.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":46849040482383,"sku":"DP-BM\/SS\/3","price":3509.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/AKR-0008114.png?v=1789965840"},{"product_id":"akrapovic-sound-kit-for-bmw-m3-f80-p-hf1100","title":"Akrapovic Sound Kit - BMW M3, M4 (F80, F82, F83)","description":"\u003cp\u003eAkrapovic Sound Kit for the BMW M3, M4 (F80, F82, F83).\u003c\/p\u003e\u003ch3\u003eAbout Akrapovič sound kits\u003c\/h3\u003e\u003cp\u003eA sound kit changes how the exhaust is controlled rather than what it is made of, giving the driver command of the valves and the character of the system from inside the car.\u003c\/p\u003e\u003cp\u003eThe optional Akrapovic Sound Kit enables owners of selected Akrapovic car exhausts to control the sound of the system from the cockpit of their machine. Using Akrapovic technology, drivers can easily switch between the quiet mode and a sportier sound. With the use of a receiver to drive the actuators that open or close the valves at the end of the exhaust system, drivers can use the Sound Remote Controller or the new smartphone app (for iOS and Android) to regulate the valves. In this case, the ECE homologation is not valid anymore.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation time: about 150 minutes\u003c\/li\u003e\n\u003cli\u003eListed by Akrapovič for: BMW M3 (F80) Sedan M3 2015-2018; BMW - M3 (F80) (2014 - 2018)BMW - M4 (F82, F83) (2014 - 2020)\u003c\/li\u003e\n\u003cli\u003ePart number P-HF1100\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne sound kit, as described above.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":46849049690191,"sku":"P-HF1100","price":1769.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/AKR-0010138.png?v=1789965845"},{"product_id":"akrapovic-carbon-tail-pipe-set-for-bmw-m3-f80-tp-ct-26","title":"Akrapovic Carbon Tail Pipe Set - BMW M3, M4 (F80, F82, F83)","description":"\u003cp\u003eAkrapovic Carbon Tail Pipe Set for the BMW M3, M4 (F80, F82, F83).\u003c\/p\u003e\u003ch3\u003eAbout Akrapovič tail pipes\u003c\/h3\u003e\u003cp\u003eAkrapovič tail pipes are the visible end of the system, made in titanium or carbon fibre to suit their own exhausts. They are chosen to match the system rather than fitted in isolation.\u003c\/p\u003e\u003cp\u003eAs the most visible part of an exhaust system, we pay the utmost attention to the tailpipes. Akrapovic has created hand-crafted carbon-fibre tailpipes to enrich the visual enjoyment of the Slip-On or Evolution exhaust systems. Sporting the unique Akrapovic round design, the carbon- version has sandblasted titanium inner parts with a bigger diameter than stock tailpipes to make them stand out from the crowd even more. The new model was unveiled with distinctive Akrapovic design elements, and these beautifully crafted additions are designed to fit perfectly with the carbon- diffuser.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWeight: 1.9 kg\u003c\/li\u003e\n\u003cli\u003eListed by Akrapovič for: BMW M3 (F80) Sedan M3 2015-2018; BMW - M3 (F80) (2014 - 2018)BMW - M4 (F82, F83) (2014 - 2020)\u003c\/li\u003e\n\u003cli\u003ePart number TP-CT\/26\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne carbon tail pipe set, as described above.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":46849062633551,"sku":"TP-CT\/26","price":3509.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/360_F_504289605_zehJiK0tCuZLP2MdfFBpcJdOVxKLnXg1_d27f6246-ac65-476d-b1b7-5443f779c13e.jpg?v=1789965863"},{"product_id":"akrapovic-titanium-tail-pipe-set-for-bmw-m3-f80-tp-t-s-8","title":"Akrapovic Titanium Tail Pipe Set - BMW M3, M4 (F80, F82, F83)","description":"\u003cp\u003eAkrapovic Titanium Tail Pipe Set for the BMW M3, M4 (F80, F82, F83).\u003c\/p\u003e\u003ch3\u003eAbout Akrapovič tail pipes\u003c\/h3\u003e\u003cp\u003eAkrapovič tail pipes are the visible end of the system, made in titanium or carbon fibre to suit their own exhausts. They are chosen to match the system rather than fitted in isolation.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWeight: 1.9 kg\u003c\/li\u003e\n\u003cli\u003eListed by Akrapovič for: BMW M3 (F80) Sedan M3 2015-2018; BMW - M3 (F80) (2014 - 2018)BMW - M4 (F82, F83) (2014 - 2020)\u003c\/li\u003e\n\u003cli\u003ePart number TP-T\/S\/8\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne titanium tail pipe set, as described above.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":46849064009807,"sku":"TP-T\/S\/8","price":3509.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/AKR-0010909.png?v=1789965869"},{"product_id":"akrapovic-carbon-fibre-mirror-cap-set-matte-for-bmw-m2-competition-f87n-wm-bm-ca-2-m","title":"Akrapovic Carbon Fibre Mirror Cap Set - Matte - BMW M2 Competition, M2 CS, M3, M4 (F87N, F80, F82, F83)","description":"\u003cp\u003eAkrapovic Carbon Fibre Mirror Cap Set for the Matte - BMW M2 Competition, M2 CS, M3, M4 (F87N, F80, F82, F83).\u003c\/p\u003e\u003ch3\u003eAbout Akrapovič carbon parts\u003c\/h3\u003e\u003cp\u003eAkrapovič carbon parts are made from the same pre-preg carbon used across their range, finished in matte or gloss to match the system and the car.\u003c\/p\u003e\u003cp\u003eThe eye-catching hand-made carbon fibre mirror caps add a visual improvement to the stylish lines of the car. Beautifully designed and finished in either a high-gloss or matte finish, these mirror caps will enhance the car’s appearance and add a perfect match for the Akrapovic carbon fibre diffuser.\u003c\/p\u003e\u003cp\u003eMirror cap set does not fit on right-hand drive vehicles.\u003c\/p\u003e\u003cp\u003eBMW - M2 Competition (F87N) (2018 - 2020)BMW - M2 Competition (F87N) - OPF\/GPF (2018 - 2020)BMW - M2 CS (F87N) (2020 - 2021)BMW - M2 CS (F87N) - OPF\/GPF (2020 - 2021)BMW - M3 (F80) (2014 - 2018)BMW - M4 (F82, F83) (2014 - 2020)BMW - M4 (F82, F83) - OPF\/GPF (2018 - 2020)\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation time: about 30 minutes\u003c\/li\u003e\n\u003cli\u003eListed by Akrapovič for: BMW M2 (F87) Coupe CS 2020-2021BMW M2 (F87) Coupe Competition 2018-2021BMW M3 (F80) Sedan M3 2015-2018\u003c\/li\u003e\n\u003cli\u003ePart number WM-BM\/CA\/2\/M\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBMW M2, 2018 to 2021\u003c\/li\u003e\n\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne carbon fibre mirror cap set, as described above.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":46849065123919,"sku":"WM-BM\/CA\/2\/M","price":1699.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/AKR-0011558.png?v=1789965871"},{"product_id":"akrapovic-exhaust-system-for-bmw-m3-m4-f80-f82-f83-m-bm-t-8h-kit","title":"Akrapovic Exhaust System - BMW M3, M4 (F80, F82, F83)","description":"\u003cp\u003eAkrapovic Exhaust System for the BMW M3, M4 (F80, F82, F83).\u003c\/p\u003e\u003ch3\u003eAbout Akrapovič exhaust systems\u003c\/h3\u003e\u003cp\u003eAn Akrapovič exhaust system replaces the factory system from the manifold or the catalyst back, and is developed for one car rather than adapted. The work goes into three things at once: how much the system weighs, how the gas flows through it, and what the car sounds like at every point in the rev range.\u003c\/p\u003e\u003cp\u003eComponents are made from titanium, stainless steel or Inconel depending on the system, with cast parts produced in Akrapovič's own foundry. The material for this system is named in the title and the specification.\u003c\/p\u003e\u003cp\u003eThe latest addition to the BMW M series is the awe-inspiring M3\/M4, an exquisite high-performance car that can be made even better by adding an Akrapovic Slip-On exhaust system. Made from titanium—with some parts cast in Akrapovic’s own foundry—it has bigger pipes than the stock exhaust, yielding lower back pressure and more power, especially at lower RPMs. This system is a completely new design, and it will reduce overall vehicle weight and deliver extra power and a sporty sound, which has been tailored to highlight lower frequencies and increase the listening enjoyment. Increases in both power and torque add to the sensory experience, combined with improved agility. The look of the Slip-On system can also be further enhanced by adding titanium or carbon- tailpipes and the stunning carbon- rear diffuser.\u003c\/p\u003e\u003cp\u003eAn optional Akrapovic Sound Kit is available to control the different sound settings.\u003c\/p\u003e\u003cp\u003eFittment notice:\u003c\/p\u003e\u003cp\u003eThis system does not fit on vehicles equipped with Otto particulate filter (OPF).\u003c\/p\u003e\u003cp\u003eExhaust system also fits to M3\/M4 CS (Sport Club) and GTS version (ECE type approval is not valid for GTS model).\u003c\/p\u003e\u003cp\u003eAs the most visible part of an exhaust system, we pay the utmost attention to the tailpipes. Akrapovic has created hand-crafted carbon-fibre tailpipes to enrich the visual enjoyment of the Slip-On or Evolution exhaust systems. Sporting the unique Akrapovic round design, the carbon- version has sandblasted titanium inner parts with a bigger diameter than stock tailpipes to make them stand out from the crowd even more. The new model was unveiled with distinctive Akrapovic design elements, and these beautifully crafted additions are designed to fit perfectly with the carbon- diffuser.\u003c\/p\u003e\u003cp\u003eThe Evolution link pipe set upgrades the Slip-On system to the Evolution system, which consists of a single-central muffler with valves and bigger Evolution link pipe tubes with a middle muffler, all designed to make the performance and workmanship of the complete system as perfect as it looks. With no second set of cats (unlike the stock system), the whole system is designed to give the smoothest flow—and the power and torque gains of the BMW with the combination of the Slip-On Line system and Evolution link pipe set are absolutely guaranteed. Crafted entirely from titanium, the complete system has a unique sound to complement its substantial increase over a very wide rpm range. In-depth engineering has produced a sound distinctly different from the stock system, giving a deep and sporty sound with no unwanted overtones or drone, and also a significant change to the sound with the valves in the open or closed positions. The complete system needs no re-programming of the ECU because it doesn’t trigger any warning lights. With tailpipes in titanium or carbon, and a handcrafted rear diffuser, all available as optional extras, the BMW with the Slip-On Line and Evolution link pipe set is as beautiful as it is powerful.\u003c\/p\u003e\u003cp\u003eExhaust system also fits to M3\/M4 CS (Sport Club) and GTS version.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePower: 327.7 kW at 6,250 rpm standard, 331.5 kW at 6,600 rpm with Akrapovič, up to + 5.4 kW at 4,400 rpm\u003c\/li\u003e\n\u003cli\u003eTorque: 583.1 Nm at 3,900 rpm standard, 584.6 Nm at 4,000 rpm with Akrapovič, up to + 17.4 Nm at 2,350 rpm\u003c\/li\u003e\n\u003cli\u003eWeight: 20.0 kg standard, 17.0 kg with Akrapovič, 3.0 kg saved\u003c\/li\u003e\n\u003cli\u003eWeight saving: 15.0%\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 150 minutes\u003c\/li\u003e\n\u003cli\u003eWeight: 1.9 kg\u003c\/li\u003e\n\u003cli\u003ePower: 327.7 kW at 6,250 rpm standard, 333.1 kW at 6,600 rpm with Akrapovič, up to + 7.5 kW at 5,200 rpm\u003c\/li\u003e\n\u003cli\u003eTorque: 583.1 Nm at 3,900 rpm standard, 589.2 Nm at 3,900 rpm with Akrapovič, up to + 16.0 Nm at 2,450 rpm\u003c\/li\u003e\n\u003cli\u003eWeight: 12.1 kg standard, 8.0 kg with Akrapovič, 4.1 kg saved\u003c\/li\u003e\n\u003cli\u003eWeight saving: 33.9%\u003c\/li\u003e\n\u003cli\u003eSound level: 94 dB at 3,750 rpm standard, 95.6 dB at 3,750 rpm with Akrapovič\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 220 minutes\u003c\/li\u003e\n\u003cli\u003ePower: 343.0 kW at 6,650 rpm standard, 355.9 kW at 6,550 rpm with Akrapovič, up to + 17.2 kW at 5,800 rpm\u003c\/li\u003e\n\u003cli\u003eTorque: 584.9 Nm at 4,200 rpm standard, 602.6 Nm at 4,950 rpm with Akrapovič, up to + 28.7 Nm at 4,950 rpm\u003c\/li\u003e\n\u003cli\u003eWeight: 7.1 kg standard, 3.9 kg with Akrapovič, 3.2 kg saved\u003c\/li\u003e\n\u003cli\u003eWeight saving: 45.1%\u003c\/li\u003e\n\u003cli\u003eSound level: 94 dB at 3,750 rpm standard, 100.5 dB at 3,750 rpm with Akrapovič\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 60 minutes\u003c\/li\u003e\n\u003cli\u003eWeight: 0.4 kg standard, 0.3 kg with Akrapovič, 0.1 kg saved\u003c\/li\u003e\n\u003cli\u003eWeight saving: 25.0%\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 30.0 minutes\u003c\/li\u003e\n\u003cli\u003eListed by Akrapovič for: BMW M3 (F80) Sedan M3 2015-2018; BMW - M3 (F80) (2014 - 2018)BMW - M4 (F82, F83) (2014 - 2020)\u003c\/li\u003e\n\u003cli\u003eOffered in 2 versions, listed as options on this page\u003c\/li\u003e\n\u003cli\u003ePart number M-BM\/T\/8H-KIT+TP-CT\/26\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSlip-On Line (Titanium) (M-BM\/T\/8H)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThis product does not meet emission compliance requirements for street or highway use.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Akrapovič warranty applies.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Carbon Tail Pipe Set","offer_id":46849082884175,"sku":"M-BM\/T\/8H-KIT+TP-CT\/26","price":12188.0,"currency_code":"AUD","in_stock":true},{"title":"Titanium Tail Pipe Set","offer_id":46849082916943,"sku":"M-BM\/T\/8H-KIT+TP-T\/S\/8","price":12188.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/AKRA-BMW-21-KIT_14.png?v=1789965913"},{"product_id":"f80-dp-redstar-bmw-f80-m3-m4-downpipes","title":"Redstar Downpipes - BMW F80 M3\/M4","description":"\u003cp\u003eRedstar Downpipes for the BMW F80 M3\/M4.\u003c\/p\u003e\u003ch3\u003eAbout Redstar downpipes\u003c\/h3\u003e\u003cp\u003eThe downpipe is the first section after the turbo and the tightest restriction in most factory systems. Replacing it drops backpressure where it costs the most, which sharpens throttle response, lets the turbo spool sooner and frees real power rather than just noise.\u003c\/p\u003e\u003cp\u003eRedstar build theirs in 2mm wall 304L stainless, TIG welded and back purged, with OEM specification flanges and the factory brackets and mounts, so they go on without fabrication. Catalyst and heat shielding options are listed on the product.\u003c\/p\u003e\u003cp\u003eTransform the exhaust performance of your BMW M3 F80, M4 F82 and F83, and M2 F22\/F87 Competition with Redstar performance exhaust downpipes engineered for the 3.0 S55 twin turbo engine. These downpipes replace the restrictive factory catalytic converters within the downpipe section to free up exhaust flow for your S55-powered M car.\u003c\/p\u003e\u003cp\u003eExpect sharper throttle response, quicker turbo spool, and meaningful power gains from the reduced backpressure and flow-optimised transitions. Optionally, Redstar OEM-style heat shielding uses motorsport-inspired construction to cut radiant heat by up to 80 percent, helping lower under-bonnet temperatures and supporting turbo longevity while enriching the exhaust character with a more assertive note.\u003c\/p\u003e\u003cp\u003eBuilt for demanding use, every Redstar downpipe is hand made from premium 2.0mm wall 304L stainless steel, 100 percent TIG welded and back purged, and fitted with OEM-spec 304L stainless steel flanges plus factory-style brackets and mounts. The result is a true 100 percent bolt-on fit that is LHD\/RHD compliant and integrates seamlessly with the original system. Choose Redstar downpipes for uncompromising quality, durability, and a decisive step up in performance and sound.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFlow-optimised smooth transition design\u003c\/li\u003e\n\u003cli\u003e2.0mm wall 304L stainless steel construction\u003c\/li\u003e\n\u003cli\u003e100 percent TIG welded and back purged\u003c\/li\u003e\n\u003cli\u003e100 percent hand made manufacturing\u003c\/li\u003e\n\u003cli\u003eOEM-spec 304L stainless steel flanges\u003c\/li\u003e\n\u003cli\u003eBrackets and mounts mirror OEM geometry\u003c\/li\u003e\n\u003cli\u003eLHD and RHD compliant design\u003c\/li\u003e\n\u003cli\u003eNoticeable power and torque gains from removing restrictive stock catalytic converters\u003c\/li\u003e\n\u003cli\u003eFaster turbo spool and crisper throttle response due to reduced backpressure\u003c\/li\u003e\n\u003cli\u003eLower under-bonnet temperatures when specified with Redstar OEM-style heat shielding\u003c\/li\u003e\n\u003cli\u003eMore pronounced, motorsport-inspired exhaust tone\u003c\/li\u003e\n\u003cli\u003eDirect 100 percent bolt-on installation to factory mounting points\u003c\/li\u003e\n\u003cli\u003eHJS HD 200cpsi Catalytic Converters: Engineered in Germany and trusted worldwide, the HJS 200cpsi ultra high-performance cats are rated for over 1000hp. Renowned for exceptional flow, durability, and consistent quality, these converters set the benchmark for high-output applications. Ideal for drivers demanding maximum performance without compromise.\u003c\/li\u003e\n\u003cli\u003eGESI GEN2 400cpsi Catalytic Converters: The latest GEN2 series from GESI is rated to support up to 1000hp while offering smoother exhaust flow and improved efficiency compared with factory units. Featuring advanced emissions technology for optimal catalyst function at high flow rates. A strong choice for those seeking significant performance gains with refined operation.\u003c\/li\u003e\n\u003cli\u003eOEM-Style Heat Shielding: Redstar's signature thermal management system reduces radiant exhaust heat by up to 80%. Developed with motorsport-inspired materials and construction, it uses a multi-layer design of ceramic insulation and embossed stainless steel foil. Unlike wraps or coatings that degrade quickly, Redstar shielding delivers long-term durability and consistent protection for engine bay components.\u003c\/li\u003e\n\u003cli\u003eEURO 6 compliant when specified with HJS HD 200cpsi catalytic converters\u003c\/li\u003e\n\u003cli\u003eListed by Redstar for: 2014-2018 M3 F80 Sedan 3.0 S55 Twin Turbo; 2014-2018 M4 F82 Coupe 3.0 S55 Twin Turbo; 2014-2018 M4 F83 Convertible 3.0 S55 Twin Turbo; 2018-2022 M2 F22\/F87 Competition 3.0 S55 Twin Turbo; BMW M2 (F87) Coupe CS 2020-2021; BMW M2 (F87) Coupe Competition 2018-2021; BMW M3 (F80) Sedan CS 2018-2018; BMW M3 (F80) Sedan Competition 2016-2018 and others\u003c\/li\u003e\n\u003cli\u003eOffered in 6 versions, listed as options on this page\u003c\/li\u003e\n\u003cli\u003ePart numbers start at F80-DP45-HS\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBMW M2, 2018 to 2021\u003c\/li\u003e\n\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\n\u003cli\u003eBMW M4, 2017 to 2019\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne set of downpipes, in the version selected above.\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. Redstar warranty applies.\u003c\/p\u003e","brand":"Redstar Exhaust","offers":[{"title":"GESI GEN2 UHO+ 400cpsi 4.5\" \/ Heat Shielded","offer_id":46873083609167,"sku":"F80-DP45-HS","price":6469.0,"currency_code":"AUD","in_stock":true},{"title":"GESI GEN2 UHO+ 400cpsi 4.5\" \/ No Heat Shielding","offer_id":46873083641935,"sku":"F80-DP45","price":5729.0,"currency_code":"AUD","in_stock":true},{"title":"HJS HD 200cpsi 121mm \/ Heat Shielded","offer_id":46873083674703,"sku":"F80-DP121-HS","price":6699.0,"currency_code":"AUD","in_stock":true},{"title":"HJS HD 200cpsi 121mm \/ No Heat Shielding","offer_id":46873083707471,"sku":"F80-DP121","price":5959.0,"currency_code":"AUD","in_stock":true},{"title":"Competition (catless) \/ Heat Shielded","offer_id":46873083740239,"sku":"F80-DPCL-HS","price":2819.0,"currency_code":"AUD","in_stock":true},{"title":"Competition (catless) \/ No Heat Shielding","offer_id":46873083773007,"sku":"F80-DPCL","price":2079.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/F80-DP.jpg?v=1790044458"},{"product_id":"awe-bmw-exh-007-awe-exhaust-suite-for-bmw-f8x-m3-m4","title":"AWE Exhaust Suite for BMW F8X M3\/M4","description":"AWE’s second-generation Cat Back Track Edition takes all of the precision engineering and performance of its SwitchPath™ counterpart, minus the valved muffler in the rear. The result is a constant “valve open” mode, at an affordable price. If you're craving rich and rowdy tones at all times, and a hefty 22.5lb weight savings, this is your dose of steel. Handcrafted from U.S.-sourced .065\" wall T304L stainless steel, in house, at AWE world HQ. Featuring a unified design for OPF euro and non-euro spec cars, 50-state legal Cat Back design (perfect tone with all catalysts intact!), Precision-engineered X-pipe to unlock a clean S55 tone, 3” CNC mandrel-bent Cat Back configuration, and max gains of 12 hp and 16 lb-ft of torque at the wheels. Comes complete with AWE valve simulators to accommodate your factory exhaust valve motors, 102mm double-walled, slash-cut tips, and flaunts AWE's No Check Engine Light Guarantee, Perfect Fitment Guarantee, and AWE Lifetime Exhaust Warranty. Note: This version is known to get rowdy, and may be too much for many. For that reason, this particular version cannot be returned due to sound preference. Prepare yourself (Sport+ mode can be pretty raucous)!\u003cp\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBMW M3 (F80) Sedan M3 2015-2018\u003cbr\u003eBMW M4 (F82) Coupe CS 2017-2019\u003cbr\u003eBMW M4 (F82) Coupe M4 2015-2020\u003cbr\u003eBMW M4 (F83) Convertible M4 2015-2020\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer fitment (US model years)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e2015-2018 BMW M3 Base 3.0L Sedan\u003cbr\u003e2015-2020 BMW M4 Base 3.0L Convertible\u003cbr\u003e2015-2020 BMW M4 Base 3.0L Coupe\u003cbr\u003e2018-2020 BMW M4 CS 3.0L Coupe\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVideo\u003c\/strong\u003e\u003c\/p\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/iOi-IqEazTE\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003cp\u003e\u003cem\u003eProfessional fitting is recommended.\u003c\/em\u003e\u003c\/p\u003e","brand":"AWE","offers":[{"title":"Track \/ Chrome Silver Tips","offer_id":46874434207823,"sku":"3020-42082","price":4459.0,"currency_code":"AUD","in_stock":true},{"title":"Track \/ Diamond Black Tips","offer_id":46874434240591,"sku":"3020-43087","price":4459.0,"currency_code":"AUD","in_stock":true},{"title":"SwitchPath \/ Chrome Silver Tips","offer_id":46874434273359,"sku":"3025-42070","price":5929.0,"currency_code":"AUD","in_stock":true},{"title":"SwitchPath \/ Diamond Black Tips","offer_id":46874434306127,"sku":"3025-43074","price":5929.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/AWE-BMW-EXH-007.png?v=1790054155"},{"product_id":"2660-13038-awe-bmw-f8x-m3-m4-s-flo-carbon-intake","title":"AWE BMW F8X M3\/M4 S-FLO Carbon Intake","description":"\u003cp\u003ePresenting the AWE BMW F8X M3\/M4 S-FLO Carbon Intake: The Carbon Fiber Air Boxes: The AWE BMW F8X M3\/M4 S-FLO Carbon Intake is comprised of two fully enclosed carbon fiber air boxes that mount securely in the stock locations, engineered to match up perfectly with the factory air inlet pipes. Together with the AWE S-FLO Filters, the intake unlocks peak gains of 12 hp and 10 lb-ft of torque at the crank. Each carbon fiber airbox is crafted from high grade 2x2 weave carbon fiber with UV-stabilized resin and clear coat, which means no heat-yellowing. The S-FLO Filter: The AWE BMW F8X M3\/M4 S-FLO Carbon Intake includes two S-FLO Filters specifically designed for the F8X M3\/M4. These filters produce a more aggressive intake note, releasing a distinctive turbo spool sound. The included AWE S-FLO Filters use a proprietary design that is both durable and washable. Power, sophistication, and looks, alongside trademark AWE CEL-free operation and AWE's class-leading fitment guarantee. Breathe easy, F8X. Please note, AWE S-FLO Intakes are for racing use only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBMW M3 (F80) Sedan M3 2015-2018\u003cbr\u003eBMW M4 (F82) Coupe M4 2015-2020\u003cbr\u003eBMW M4 (F83) Convertible M4 2015-2020\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer fitment (US model years)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e2015-2018 BMW M3 Base 3.0L Sedan\u003cbr\u003e2015-2020 BMW M4 Base 3.0L Convertible\u003cbr\u003e2015-2020 BMW M4 Base 3.0L Coupe\u003cbr\u003e2016-2016 BMW M4 GTS 3.0L Coupe\u003c\/p\u003e\u003cp\u003e\u003cem\u003eProfessional fitting is recommended.\u003c\/em\u003e\u003c\/p\u003e","brand":"AWE","offers":[{"title":"Default Title","offer_id":46874440597583,"sku":"2660-13038","price":3329.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/2660-13038_full.jpg?v=1790054250"},{"product_id":"csf8075x-csf-bmw-f8x-m3-m4-front-mount-heat-exchanger-w-rock-guard","title":"CSF Heat Exchanger w\/ Rock Guard - BMW F8X M3\/M4 (Front Mount)","description":"\u003cp\u003eCSF Heat Exchanger w\/ Rock Guard for the BMW F8X M3\/M4.\u003c\/p\u003e\u003ch3\u003eAbout CSF heat exchangers\u003c\/h3\u003e\u003cp\u003eA heat exchanger is the water-to-air half of a charge cooling system, and it does the work a front mounted intercooler does on a conventional car. CSF build theirs in aluminium with a high density core to pull heat out of the coolant loop faster than the factory unit.\u003c\/p\u003e\u003cp\u003eSignificantly reduce Intake Air Temperatures (IAT) for Maximum Performance (with Faster Heat Soak Recovery) on your F8X M3\/M4 with a CSF Heat Exchangers.\u003c\/p\u003e\u003cp\u003eBMW M3 (F80) Sedan CS 2018-2018BMW M3 (F80) Sedan Competition 2016-2018BMW M3 (F80) Sedan M3 2015-2018BMW M4 (F82) Coupe CS 2017-2019BMW M4 (F82) Coupe Competition 2016-2020BMW M4 (F82) Coupe M4 2015-2020BMW M4 (F83) Convertible Competition 2017-2020BMW M4 (F83) Convertible M4 2015-2020\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2-row 42mm Core (Dual Core) Featuring CSF's Exclusive B-tube Technology\u003c\/li\u003e\n\u003cli\u003eCore Features an Ultra-Efficient Fin with 6.5mm Fin Height and Multi-Louvered Design for Maximum Surface Area Contact\u003c\/li\u003e\n\u003cli\u003eDual-Pass Flow Structure Allows the Coolant to Flow Across the Core of the Radiator Two Times Before Exiting the Radiator for the Lowest Outlet Temperature Possible (OEM Style Design)\u003c\/li\u003e\n\u003cli\u003eCNC Machined, OEM-Style \"Quick-Connect\" Inlet\/Outlet Connections\u003c\/li\u003e\n\u003cli\u003eCNC Machined, OEM-Style Mounting Brackets \u0026amp; Fittings for Superb Fit and Durability\u003c\/li\u003e\n\u003cli\u003eIncludes Removable Aluminium Rock Guard\u003c\/li\u003e\n\u003cli\u003eAll-Aluminium Race Style Drain Plug\u003c\/li\u003e\n\u003cli\u003e1-Hour \"Mirror Finish\" Hand Polish\u003c\/li\u003e\n\u003cli\u003eDrop-in Fit Requiring No Modifications to Install - Accepts All Attaching OEM Components Including \"Quick-Connect\" Hoses, Mounting Brackets, OEM X-Brace and All Air Ducting\/Shrouding.\u003c\/li\u003e\n\u003cli\u003eReplaces OEM Part Number: 17112284608\u003c\/li\u003e\n\u003cli\u003eOffered in 2 versions, listed as options on this page\u003c\/li\u003e\n\u003cli\u003ePart number 8075\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\n\u003cli\u003eBMW M4, 2015 to 2020\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne heat exchanger w\/ rock guard, as described above.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePlease confirm fitment with us before ordering.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. CSF warranty applies.\u003c\/p\u003e","brand":"CSF","offers":[{"title":"Mirror","offer_id":46874470973519,"sku":"8075","price":1459.0,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":46874471006287,"sku":"8075V","price":1459.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/CSF8075X.png?v=1790055404"},{"product_id":"csf8082x-csf-f8x-m3-m4-m2-comp-top-mount-charge-air-cooler","title":"CSF Cooling Part - F8X M3 \/ M4 \/ M2 Comp Top Mount Charge-Air-Cooler","description":"\u003cp\u003eCSF Cooling Part for the F8X M3 \/ M4 \/ M2 Comp Top Mount Charge-Air-Cooler.\u003c\/p\u003e\u003ch3\u003eAbout CSF intercoolers\u003c\/h3\u003e\u003cp\u003eA CSF intercooler cools the charge air after the turbo, and cooler charge air means denser air and less heat soaked into the inlet. CSF build theirs in aluminium with a bar and plate or tube and fin core depending on the application, sized to the car rather than oversized for the look of it.\u003c\/p\u003e\u003cp\u003eThey fit in the factory location and use the original mounting points, so nothing has to be cut.\u003c\/p\u003e\u003cp\u003eThe CSF Charge-Air-Cooler boasts a 60% larger core size than factory, greatly increasing the capacity for heat transfer from the hot charge air. Paired with the CSF Heat Exchanger (CSF #8075) the system is able lower your F8X's IATs.\u003c\/p\u003e\u003cp\u003eBMW M2 (F87) Coupe CS 2020-2021BMW M2 (F87) Coupe Competition 2018-2021BMW M3 (F80) Sedan CS 2018-2018BMW M3 (F80) Sedan Competition 2016-2018BMW M3 (F80) Sedan M3 2015-2018BMW M4 (F82) Coupe CS 2017-2019BMW M4 (F82) Coupe Competition 2016-2020BMW M4 (F82) Coupe M4 2015-2020BMW M4 (F83) Convertible Competition 2017-2020BMW M4 (F83) Convertible M4 2015-2020\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWorld's 1st Cast Endtank Designed Top Mount Charge-Air-Cooler for the BMW S55 Engine in the BMW F80 M3, F82\/F83 M4, and F87 M2 Competition\u003c\/li\u003e\n\u003cli\u003eMultiple Air Dividers Cast Into Both Hot\/Cold Side Endtanks for optimised Air Flow Through the Custom Designed CSF Liquid-to-Air Intercooler Core (CFD Analysis and Testing Completed to Ensure Optimal Performance)\u003c\/li\u003e\n\u003cli\u003e60% Increase in Core Size Compared to the OEM Cooler\u003c\/li\u003e\n\u003cli\u003eLeft\/Right, Cross-Flow, Dual-Pass Core Configuration with 2-Stage Water Cooling for Maximum Efficiency and Intake Temperature Reduction (vs. OEM Single-Pass Vertical-Flow Design)\u003c\/li\u003e\n\u003cli\u003eDesigned with 3D Scanning\/Rapid Prototype Technology to Ensure Precise Fitment and Maximum Surface Area Utilization\u003c\/li\u003e\n\u003cli\u003eDrop-in Fit Design for an Easy \u0026amp; Quick Plug-and-Play Installation, Complete with OEM-Style \"Quick-Connect\" Water Connections and Sensor Ports\u003c\/li\u003e\n\u003cli\u003eFinished with a Professional \"Crinkle Black\" Powder-Coated Finish (Available in Raw Aluminium with Option for Custom Powder-Coating - CSF #8082R)\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty\u003c\/li\u003e\n\u003cli\u003eOffered in 2 versions, listed as options on this page\u003c\/li\u003e\n\u003cli\u003ePart number 8082\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBMW M2, 2018 to 2021\u003c\/li\u003e\n\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\n\u003cli\u003eBMW M4, 2015 to 2020\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne cooling part, as described above.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePlease confirm fitment with us before ordering.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. CSF warranty applies.\u003c\/p\u003e","brand":"CSF","offers":[{"title":"Crinkle Black","offer_id":46874471596111,"sku":"8082","price":3039.0,"currency_code":"AUD","in_stock":true},{"title":"Raw Finish","offer_id":46874471628879,"sku":"8082R","price":3039.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/CSF8082X.png?v=1790055406"},{"product_id":"8081-csf-bmw-f8x-m3-m4-dct-transmission-cooler","title":"CSF Cooling Part - BMW F8X M3\/M4 - DCT Transmission cooler","description":"\u003cp\u003eCSF Cooling Part for the BMW F8X M3\/M4 - DCT Transmission cooler.\u003c\/p\u003e\u003ch3\u003eAbout CSF oil coolers\u003c\/h3\u003e\u003cp\u003eAn oil cooler holds oil temperature where the engine or the gearbox was designed to run, which matters on track, in traffic on a hot day, and on anything towing. CSF build theirs in aluminium, sized and plumbed for the specific car.\u003c\/p\u003e\u003cp\u003eStable oil temperature protects the oil film, and that is what protects bearings and clutches over time.\u003c\/p\u003e\u003cp\u003eCSF offers the best and most advanced Transmission Coolers on the market. Keeping your transmission temps down as you push your F8X M3\/M4\/M2 Comp hard on the street or track.\u003c\/p\u003e\u003cp\u003eBMW M3 (F80) Sedan CS 2018-2018BMW M3 (F80) Sedan Competition 2016-2018BMW M3 (F80) Sedan M3 2015-2018BMW M4 (F82) Coupe CS 2017-2019BMW M4 (F82) Coupe Competition 2016-2020BMW M4 (F82) Coupe M4 2015-2020BMW M4 (F83) Convertible Competition 2017-2020BMW M4 (F83) Convertible M4 2015-2020\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade with CSF's AC Condenser Technology Using a 1-Row Super-High Pressure 26mm Multi-Channel Microtube\u003c\/li\u003e\n\u003cli\u003eDual-Pass High Performance Core with 10 Cooling Tubes vs. OEM Single-Pass with Return Pipe 6-Tube Design\u003c\/li\u003e\n\u003cli\u003eHigh-Density Multi-Louvered Fin Design\u003c\/li\u003e\n\u003cli\u003eDrop-in Fit Requiring No Modifications to Install - Accepts All Attaching OEM Components Including Oil-Line Connections, Mounting Brackets and Shroud\/Ducting\u003c\/li\u003e\n\u003cli\u003eLab Tested at approximately 30% More Efficient Than the OEM Cooler\u003c\/li\u003e\n\u003cli\u003eWorld's 1st and Only True \"Plug-and-Play\" Upgraded DCT Transmission Cooler for the BMW S55 Engine in the BMW F80 M3, F82\/F83 M4, and F87 M2 Competition\u003c\/li\u003e\n\u003cli\u003eReplaces OEM Part Number: 17112284503\u003c\/li\u003e\n\u003cli\u003ePart number 8081\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\n\u003cli\u003eBMW M4, 2015 to 2020\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne cooling part, as described above.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePlease confirm fitment with us before ordering.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. CSF warranty applies.\u003c\/p\u003e","brand":"CSF","offers":[{"title":"Default Title","offer_id":46874474414159,"sku":"8081","price":939.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/CSF-0013042.jpg?v=1790055432"},{"product_id":"8220-csf-f8x-m3-m4-m2-comp-engine-oil-cooler","title":"CSF Oil Cooler - F8X M3\/M4\/M2 Comp Engine","description":"\u003cp\u003eCSF Oil Cooler for the F8X M3\/M4\/M2 Comp Engine.\u003c\/p\u003e\u003ch3\u003eAbout CSF oil coolers\u003c\/h3\u003e\u003cp\u003eAn oil cooler holds oil temperature where the engine or the gearbox was designed to run, which matters on track, in traffic on a hot day, and on anything towing. CSF build theirs in aluminium, sized and plumbed for the specific car.\u003c\/p\u003e\u003cp\u003eStable oil temperature protects the oil film, and that is what protects bearings and clutches over time.\u003c\/p\u003e\u003cp\u003eCSF offers the best and most advanced Oil Coolers on the market. So when it comes to keeping your engine oil temps down as you push your F8X M3\/M4\/M2 Comp hard on the street or track, a CSF Oil Cooler is the obvious choice.\u003c\/p\u003e\u003cp\u003eBMW M2 (F87) Coupe CS 2020-2021BMW M2 (F87) Coupe Competition 2018-2021BMW M3 (F80) Sedan CS 2018-2018BMW M3 (F80) Sedan Competition 2016-2018BMW M3 (F80) Sedan M3 2015-2018BMW M4 (F82) Coupe CS 2017-2019BMW M4 (F82) Coupe Competition 2016-2020BMW M4 (F82) Coupe M4 2015-2020BMW M4 (F83) Convertible Competition 2017-2020BMW M4 (F83) Convertible M4 2015-2020\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e5.4mm Tall Multi-Louvered Fin vs. OEM 7mm\u003c\/li\u003e\n\u003cli\u003eMade with CSF's AC Condenser Technology Using a 1-Row Super-High Pressure 16mm 9-Channel Microtube for Optimal Oil Flow and Maximum Surface Area Contact\u003c\/li\u003e\n\u003cli\u003eUtilizes OEM Top\/Bottom Rubber Seals for Optimal Airflow\u003c\/li\u003e\n\u003cli\u003eOEM Style Inlet\/Outlet Connections\u003c\/li\u003e\n\u003cli\u003eDrop-in Fit Requires No Modifications to Install\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware\u003c\/li\u003e\n\u003cli\u003eCompatible with the aftermarket oil cooler guards (ex: Fall-Line, Turner, Etc)\u003c\/li\u003e\n\u003cli\u003e2-Year Limited Warranty\u003c\/li\u003e\n\u003cli\u003eIdeal for Road Racing, Drag Racing, and Vehicles With Increased Performance and\/or Transmission Tuning\u003c\/li\u003e\n\u003cli\u003ePart number 8220\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBMW M2, 2018 to 2021\u003c\/li\u003e\n\u003cli\u003eBMW M3, 2015 to 2018\u003c\/li\u003e\n\u003cli\u003eBMW M4, 2015 to 2020\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you receive\u003c\/h3\u003e\u003cp\u003eOne oil cooler, as described above.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePlease confirm fitment with us before ordering.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eShipped Australia wide, with fitting available in our workshop. CSF warranty applies.\u003c\/p\u003e","brand":"CSF","offers":[{"title":"Default Title","offer_id":46874475757647,"sku":"8220","price":1099.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/files\/CSF-0013073.jpg?v=1790055448"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/4383\/8543\/collections\/hxm-car-bmw-m3-f80-competition.jpg?v=1795126232","url":"https:\/\/www.heasmans.com.au\/collections\/bmw-f80-m3-competition.oembed","provider":"Heasmans","version":"1.0","type":"link"}